JVC KD-G737 User manual

ENGLISHРУCCKИЙУКРАЇНА
CD RECEIVER
РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ
ПРИЙМАЧ З ПРОГРАВАЧЕМ КОМПАКТ-ДИСКІВ
KD-G737
For installation and connections, refer to the separate manual.
Указания по ус ановке и выполнению соединений приводя ся в о дельной инс рукции.
Вказівки по вс ановленню а виконанню підключень наведені у окремій інс рукції.
INSTRUCTIONS
ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ
ІНСТРУКЦІЇ
GET0432-001A
[EE]
For canceling the display demonstration, see page 4.
Информацию об о мене демонс рации функций дисплея см. на с р. 4.
Інформацію щодо відміни демонс рації функцій дисплею див. на с ор. 4.
В соо ве с вии с Законом Российской Федерации “О защи е прав по ре би елей” срок службы (годнос и) данного
овара “по ис ечении ко орого он може предс авля ь опаснос ь для жизни, здоровья по реби еля, причиня ь вред
его имущес ву или окружающей среде” сос авляе семь (7) ле со дня производс ва. Э о срок являе ся временем,
в ечение ко орого по реби ель данного овара може безопасно им пользова ься при условии соблюдения
ин с рук ции по эксплуа ации данного овара, проводя необходимое обслуживание, включающее замену расходных
ма ериалов и/или соо ве с вующее ремон ное обеспечение в специализированном сервисном цен ре.
Дополни ельные косме ические ма ериалы к данному овару, пос авляе мые вмес е с ним, могу храни ься в
ечение двух (2) ле со дня его производс ва.
Срок службы (годнос и), кроме срока хранения дополни ельных косме и ческих ма ериалов, упомяну ых
в предыдущих двух пунк ах, не за рагивае никаких других прав по реби еля, в час нос и, гаран ийного
свиде ельс ва JVC, ко орое он може получи ь в соо ве с вии с законом о правах по реби еля или других законов,
связанных с ним.
Cover_KD-G737_001A_pre.indd 1Cover_KD-G737_001A_pre.indd 1 12/14/06 2:55:30 PM12/14/06 2:55:30 PM

ENGLISH
2
How to reset your unit
• Your preset adjustments will also be erased (except
the registered Bluetooth device, see page 14).
How to forcibly eject a disc
“PLEASE” and “EJECT” appear alternately on the
display.
• Be care ul not to drop the disc when it ejects.
• I this does not work, reset your unit.
Thank you for purchasing a JVC product.
Please read all instructions carefully efore operation, to ensure your complete understanding and to o tain the est
possi le performance from the unit.
IMPORTANT FOR LASER PRO UCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user servicea le parts inside the unit; leave all servicing to
qualified service personnel.
3. CAUTION: Visi le and/or invisi le class 1M laser radiation when open. Do not view directly with optical
instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
Warning:
If you need to operate the unit while driving, e
sure to look around carefully or you may e involved
in a traffic accident.
For safety...
• Do not raise the volume level too much, as this will
lock outside sounds, making driving dangerous.
• Stop the car efore performing any complicated
operations.
Temperature inside the car...
If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car ecomes
normal efore operating the unit.
[European Union only]
EN02-05_KD-G737_001A_pre.indd 2EN02-05_KD-G737_001A_pre.indd 2 12/14/06 2:56:22 PM12/14/06 2:56:22 PM

ENGLISH
3
How to use functions mode
If you press M MODE, the unit goes into functions
mode, then the num er uttons (except “4”) and
5/∞ uttons work as different function uttons.
Caution on volume setting:
Discs and connected USB devices produce very
little noise compared with other sources. Lower
the volume efore playing to avoid damaging the
speakers y the sudden increase of the output level.
Available characters on the display
Availa le characters
Display indications
CONTENTS
INTRODUCTIONS
Preparation ............................................ 4
OPERATIONS
Basic operations ...................................... 5
• Using the control panel ....................... 5
• Using the remote controller
(RM-RK50) ......................................... 6
Listening to the radio ............................... 8
Searching for FM R S programme
— PTY Search ....................................... 9
isc operations ........................................ 11
Listening to the USB device ....................... 12
EXTERNAL DEVICES
Using the Bluetooth® devices .................... 14
• Using the Bluetooth cellular phone ..... 16
• Using the Bluetooth audio player ........ 18
Listening to the C changer ...................... 18
Listening to the AB tuner ........................ 20
Listening to the iPod / . player ................. 21
Listening to the other external
components ......................................... 22
SETTINGS
Selecting a preset sound mode .................. 24
General settings — PSM ........................... 25
Bluetooth settings ................................... 28
REFERENCES
Maintenance ........................................... 29
More about this unit ................................ 30
Troubleshooting ...................................... 34
Specifications .......................................... 38
[Within 5 seconds...]
EN02-05_KD-G737_001A_pre.indd 3EN02-05_KD-G737_001A_pre.indd 3 12/14/06 2:56:25 PM12/14/06 2:56:25 PM

ENGLISH
4INTRODUCTIONS
Preparation
Cancel the display demonstration and set the clock
• See also page 26.
~ Turn on the power.
Ÿ Enter the PSM settings.
! ] ⁄ Cancel the display demonstrations
Select “DEMO,” then “DEMO OFF.”
Set the clock
Select “CLOCK H” (hou ), then adjust the hou .
Select “CLOCK M” (minute), then adjust the minute.
Select “24H/12H,” then “24H” (hou ) o “12H” (hou ).
@ Finish the procedure.
When the powe is tu ned off: Check the cu ent clock time
When the powe is tu ned on: Change the display info mation
Detaching the control panel Attaching the control panel
CAUTI N:
The leve comes out if you p essed the 0 button while the panel
is detached. If this happens, push the leve back into lock position
befo e attaching the panel.
Leve
EN02-05_KD-G737_001A_pre.indd 4EN02-05_KD-G737_001A_pre.indd 4 1/5/07 9:13:15 AM1/5/07 9:13:15 AM

ENGLISH
5OPERATIONS
Basic operations
Using the control panel
1 Select the source.
FM/AM = DAB * = CD * = USB * = CD-CH */
IPOD */D.PLAYER * (or EXT IN) = BT-PHONE
(Bluetooth Phone)* = BT-AUDIO (Bluetooth
Audio)* = (back to the beginning)
* You cannot select these sources if they are not
ready or not connected.
2 Select the bands.
3 • Turn on the power.
• Turn off the power [Hold .
• Attenuate the sound (if the power is on).
• Volume control [Turn .
4 • Adjust the sound mode.
• Enter the PSM settings [Hold .
5 Display window
6 • Activate/deactivate TA Standby Reception.
• Enter RDS programme search [Hold .
7 Eject disc.
8 USB (Universal Serial Bus) input terminal
9 Detach the panel.
p Change the display information.
q Enter functions mode.
Press M MODE, then one of the following buttons
(within 5 seconds)...
EQ : Select the sound mode.
MO : Turn on/off monaural reception.
SSM : Automatic station presetting [Hold .
RPT : Select repeat play.
RND : Select random play.
5 / ∞ : Skip 10 tracks.
w • FM/AM/DAB: Select preset station/DAB service.
• CD/USB: Select folder/track/disc (for CD
changer).
• BT-PHONE: Select preset phone number.
e • FM/AM/DAB: Search for station/DAB ensemble.
• CD/USB: Select track.
• IPOD/D.PLAYER: Select track.
• BT-PHONE/BT-AUDIO: Select setting item/
Select a registered device.
r • DAB: Select DAB service.
• CD/USB: Select folder.
• IPOD/D.PLAYER: Enter the main menu/Pause or
stop playback/Confirm selection.
• BT-PHONE/BT-AUDIO: Enter setting menu/
Confirm selection.
EN02-05_KD-G737_001A_pre.indd 5EN02-05_KD-G737_001A_pre.indd 5 12/20/06 3:20:38 PM12/20/06 3:20:38 PM

ENGLISH
6
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the unit.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
Display window
Using the remote controller (RM-RK50)
Installing the lithium coin battery (CR2025)
Remote sensor
1 layback source indicators
2 Loudness indicator
3 Track information indicators
4 RDS indicators
5 Sound mode indicators
• lights up for the selected item.
6 Tuner reception indicators
7 layback mode/item indicators
(Random/Repeat)
8 Equalizer indicator
9 Bluetooth indicator
p Main display
(Time, menu, playback information)
q Track indicator
w Source display/ reset No./Track No./Folder No./
Disc No.
e Status of Bluetooth device
(Device number, [1 – 5]; signal strength, [0 – 3]*;
battery reminder, [0 – 3]*)
* As the number increases, the signal/battery
strength becomes stronger.
EN06-13_KD-G737_001A_pre.indd 6EN06-13_KD-G737_001A_pre.indd 6 12/14/06 2:55:44 PM12/14/06 2:55:44 PM

ENGLISH
7OPERATIONS
Warning:
To prevent accidents and damage
• Do not install any battery other than CR2025 or
its equivalent.
• Do not leave the remote controller in a place
(such as dashboards) exposed to direct sunli ht
for a lon time.
• Store the battery in a place where children
cannot reach.
• Do not rechar e, short, disassemble, heat the
battery, or dispose of it in a fire.
• Do not leave the battery with other metallic
materials.
• Do not poke the battery with tweezers or similar
tools.
• Wrap the battery with tape and insulate when
throwin away or savin it.
1 • Turns the power on if pressed briefly or
attenuates the sound when the power is on.
• Turns the power off if pressed and held.
2 • Chan es the FM/AM/DAB bands with 5 U.
• Chan es the preset stations (or DAB services)
with D ∞.
• Chan es the folder of the MP3/WMA/AAC/WAV.
• While playin an MP3 disc on an
MP3-compatible CD chan er:
– Chan es the disc if pressed briefly.
– Chan es the folder if pressed and held.
• While listenin to an Apple iPod or a JVC
D. player:
– Pauses/stops or resumes playback with D ∞.
– Enters the main menu with 5 U.
(Now 5 U/D ∞/2 R/F 3 work as the menu
selectin buttons.)*
3 Adjusts the volume level.
4 Selects the sound mode (iEQ: intelli ent equalizer).
5 Selects the source.
6 For Bluetooth cellular phone:
– Answers calls if pressed briefly.
– Rejects calls if pressed and held.
7 • Searches for stations (or DAB services) if pressed
briefly.
• Searches for DAB ensembles if pressed and held.
• Fast-forwards or reverses the track if pressed and
held.
• Chan es the tracks if pressed briefly.
• While listenin to an iPod or a D. player (in menu
selectin mode):
– Selects an item if pressed briefly. (Then, press
D ∞ to confirm the selection.)
– Skips 10 items at a time if pressed and held.
• Reverse skip/forward skip for Bluetooth audio.
* 5 U : Returns to the previous menu.
D ∞ : Confirms the selection.
EN06-13_KD-G737_001A_pre.indd 7EN06-13_KD-G737_001A_pre.indd 7 1/5/07 9:15:06 AM1/5/07 9:15:06 AM

ENGLISH
8
When an FM stereo broadcast is hard
to recei e
1
2
Reception improves, but stereo effect will be lost.
• MO indicator lights up.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
You can preset up to six stations for each band.
1
2
Listening to the radio
Change the display information
~ Select “FM/AM.”
Ÿ Select the bands.
! Search for a station to listen—Auto Search.
Manual Search: Hold either one of the buttons until “M”
flashes on the display, then press it repeatedly.
Select preset station.
3
Local FM stations with the strongest signals are
searched and stored automatically in the FM band.
Manual presetting
Ex.: Storing FM station of 92.5 MHz into preset number
4 of the FM1 band.
1
2
3
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
Note: FM1 and FM2: 87.5 MHz – 108.0 MHz
FM3: 65.00 MHz – 74.00 MHz
EN06-13_KD-G737_001A_pre.indd 8EN06-13_KD-G737_001A_pre.indd 8 12/14/06 2:55:47 PM12/14/06 2:55:47 PM

ENGLISH
9OPERATIONS
Storing your fa orite programme
types
You can store your favorite TY codes into the number
buttons.
1 Select a PTY code (see right column).
2 Select a preset number.
3 Repeat steps 1 and 2 for storing other
PTY codes.
4
Searching for FM RDS programme — PTY Search
Change the display information
Preset PTY codes in the number buttons (1 to 6):
PTY codes (a ailable with the control dial):
NEWS, AFFAIRS, INFO, S ORT, EDUCATE, DRAMA,
CULTURE, SCIENCE, VARIED, O M (music), ROCK M
(music), EASY M (music), LIGHT M (music), CLASSICS,
OTHER M (music), WEATHER, FINANCE, CHILDREN,
SOCIAL, RELIGION, HONE IN, TRAVEL, LEISURE, JAZZ,
COUNTRY, NATION M (music), OLDIES, FOLK M (music),
DOCUMENT
~ Acti ate PTY Search.
Ÿ Select one of the PTY codes (programme types).
See the following for details.
! Start searching.
If there is a station broadcasting a programme of the same TY code as you have selected, that station is tuned
in.
EN06-13_KD-G737_001A_pre.indd 9EN06-13_KD-G737_001A_pre.indd 9 12/14/06 2:55:48 PM12/14/06 2:55:48 PM

ENGLISH
10
Activating/deactivating TA/PTY Standby Reception
TA Standby Reception Indicator PTY Standby Reception Indicator
Press to activate. See page 26.
The unit temporarily will switch to Traffic
Announcement (TA), if available, from any
source other than A and F 3*.
The volume changes to the preset TA
volume level if the current level is lower
than the preset level (see page 26).
Lights up The unit temporarily will switch to your
favorite PTY programme from any source
other than A and F 3*.
Lights up
Not yet activated. Tune in to another
station providing the RDS signals.
Flashes Not yet activated. Tune in to another
station providing the RDS signals.
Flashes
Press to deactivate. Goes off Select “OFF” for the PTY code (see page 26)
to deactivate.
Goes off
• When a DAB tuner is connected, TA/PTY Standby Reception also searches for services. (See also pages 20 and 26.)
* The unit will not switch to Traffic Announcement or PTY programme when a call connection is established through the
“BT-PHONE ”
When driving in an area where F reception is not
sufficient enough, this unit automatically tunes in to
another F RDS station of the same network, possibly
broadcasting the same programme with stronger
signals (see the illustration on the right).
To change the Network-Tracking Reception
setting, see “AF-REG” on page 26.
• When the DAB tuner is connected, refer to “Tracing
the same programme—Alternative Frequency
Reception” on page 20.
Tracing the same programme—Network-Tracking Reception
Programme A broadcasting on different frequency
areas (01 – 05)
Automatic station se ection—Programme Search
Usually when you press the number buttons, the preset station is tuned in.
If the signals from the F RDS preset station are not sufficient for good reception, this unit, using the AF data, tunes
in to another frequency broadcasting the same programme as the original preset station is broadcasting.
• The unit takes some time to tune in to another station using programme search.
• See also page 26.
EN06-13_KD-G737_001A_pre.indd 10EN06-13_KD-G737_001A_pre.indd 10 12/22/06 12:15:13 PM12/22/06 12:15:13 PM

ENGLISH
11OPERATIONS
Disc operations
Open the control panel and insert the disc.
Playback starts automatically.
To stop p ay and eject the disc
• Press SRC to listen to
another playback source.
Prohibiting disc ejection
To cancel the prohibition, repeat the
same procedure.
hange the display information
*1 If the file does not have Tag information or “TAG DISP” is set to
“TAG OFF” (see page 27), folder name and file name appear
TAG indicator will not light up
*2 “NO NAME” appears for an audio CD
Pressing (or holding) the following buttons allows you to...
Disc type*3
(Number buttons) *4
Press: Select track
Hold: Reverse/fast-forward
track
Select folder Locate particular folder
directly *5
Press: Select track
Hold: Reverse/fast-forward
track
—
Locate particular track directly
*3 This unit can playback AAC files encoded using iTunes
*4 Press to select number 1 to 6; hold to select number 7 to 12
*5 It is required that folders be assigned with 2-digit numbers at the beginning of their folder names—01, 02, 03, and
so on Continued on the next page
EN06-13_KD-G737_001A_pre.indd 11EN06-13_KD-G737_001A_pre.indd 11 12/22/06 12:15:15 PM12/22/06 12:15:15 PM

ENGLISH
12
After pressing , press the following buttons to...
Disc type
Skip 10 tracks (within
the same folder)
TRK RPT:
Repeat current track
FLDR RPT:
Repeat current folder
FLDR RND:
Randoml pla all tracks of
current folder, then tracks of
next folders
DISC RND:
Randoml pla all tracks
Skip 10 tracks TRK RPT:
Repeat current track
DISC RND:
Randoml pla all tracks
• To cancel repeat pla or random pla , select “RPT OFF” or “RND OFF.”
Listening to the USB device
You can connect a USB mass storage class device such as a USB memor , Digital Audio Pla er *1, portable HDD, etc. to
the unit.
*1 You can connect both MTP (Media Transfer Protocol) devices and USB mass storage class devices.
Attaching a USB memory
This unit can pla MP3/WMA/WMA-DRM10 *1/AAC*2/WAV tracks stored in a USB device.
*1 See page 3 .
*2 This unit can play back AAC files encoded using iTunes. This unit cannot play back AAC files purchased from iTunes
Store.
If a USB evice has been attache ...
Pla back starts from where it has been stopped previousl .
• If a different USB device is currentl attached, pla back starts from the beginning.
USB input terminal
USB memor
EN06-13_KD-G737_001A_pre.indd 12EN06-13_KD-G737_001A_pre.indd 12 12/28/06 3:31:14 PM12/28/06 3:31:14 PM

ENGLISH
13OPERATIONS
To stop play and detach the USB device
Straightly pull it out from the unit.
• Press SRC to listen to another playback source.
Cautions:
• Avoid using the USB device if it might hinder your safety driving.
• o not pull out and attach the USB device repeatedly while “CHECK” is flashing on the display.
• o not start the car engine if a USB device is connected.
• Stop play back before disconnecting a USB device.
• This unit may not be able to play the files depending on the type of USB device.
• You cannot connect a computer to the USB input terminal of the unit.
• Make sure all important data has been backed up to avoid losing the data.
• o not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or
cause damages to the device.
Pressing (or holding) the following buttons allows you to...
Press: Select track
Hold: Reverse/fast-forward track
Select folder
(Number buttons)
Locate particular folder directly
• See also *4 and *5 on page 11.
After pressing , press the following buttons to...
Skip 10 tracks (within the same folder)
TRK RPT: Repeat current track
FLDR RPT: Repeat all tracks of current folder
FLDR RND: Randomly play all tracks of current folder, then tracks of next folders
DISC RND: Randomly play all tracks
• To cancel repeat play or random play, select “RPT OFF” or “RND OFF.”
Change the display information
* If the file does not have Tag information
or “TAG DISP” is set to “TAG OFF” (see
page 7), folder name and file name
appear. TAG indicator will not light up.
EN06-13_KD-G737_001A_pre.indd 13EN06-13_KD-G737_001A_pre.indd 13 12/20/06 3:35:21 PM12/20/06 3:35:21 PM

ENGLISH
14
Using the Bluetooth® devices
For Bluetooth operations, it is required to connect the Bluetooth Adapter (KS-BTA200) to the CD changer ack on
the rear of this unit. See also page 23.
• Refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device.
• Refer to the list (included in the box) to see the countries where you may use the Bluetooth® function.
To use a Bluetooth device through the unit (“BT-PHONE” and “BT-AUDIO”) for the first time, you need to establish
Bluetooth wireless connection between the unit and the device.
• Once the connection is established, it is registered in the unit even if you reset your unit. Up to five devices can be
registered in total.
• Only one device can be connected at a time for each source (“BT-PHONE” and “BT-AUDIO”).
Registering a Bluetooth device
2 Select “NEW.”
3 Select “OPEN.”
4 Enter a PIN (Personal Identification
Number code to the unit.
• You can enter any number you like (1-digit to
16-digit number). [Initial: 0000]
* Some devices have their own PIN code. Enter the
specified PIN code to the unit.
1 Move to the next (or previous number
position.
2 Select a number or blank space.
3 Repeat steps 1 and 2 until you finish
entering a PIN code.
4 Confirm the entry.
“OPEN...” flashes on the display.
Registration (Pairing) methods
Use either of the following items in the Bluetooth menu
to register and establish the connection with a device.
• Select “BT-PHONE” or “BT-AUDIO” as the source to
operate the Bluetooth menu.
OPEN Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating the
Bluetooth device.
SEARCH Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating
the unit.
Registering using “OPEN”
Preparation
Operate the device to turn on its Bluetooth function.
1 Select “BT-PHONE” or “BT-AUDIO.”
EN14-21_KD-G737_001A_pre.indd 14EN14-21_KD-G737_001A_pre.indd 14 12/14/06 2:56:52 PM12/14/06 2:56:52 PM

ENGLISH
15EXTERNAL DEVICES
2 Select a device you want to connect.
3 Use “OPEN’ or “SEARCH’ to connect.
To connect/disconnect a registered device
1 Select “BT-PHONE” or “BT-AUDIO.”
2 Select a registered device you want to
connect/disconnect.
3 Select “CONNECT” or “DISCNNCT” to connect/
disconnect the selected device.
You can set the unit to connect a Bluetooth device
automatically when the unit is turned on. (See
“AUTO CNT” on page 28.)
To delete a registered device
1 Select “BT-PHONE” or “BT-AUDIO.”
2 Select a registered device you want to delete.
3 Select “DELETE,” then “YES” to delete the
selected device.
5 Use the Bluetooth device to search and
connect.
On the device to be connected, enter the same PIN
code you have ust entered for this unit. “CONNECT”
flashes on the display.
Now connection is established and you can use the
device through the unit.
The device remains registered even after you
disconnect the device. Use “CONNECT“ (or activate
“AUTO CNT”) to connect the same device from next
time. (See the right column and page 28.)
To search for available devices
Perform steps 1 and 2 on page 14, then...
1 Select “SEARCH.”
The unit searches and displays the list of the
available devices.
• If no available device is detected, “UNFOUND”
appears.
2 Select a device you want to connect.
3 Enter the specific PIN code of the device to
the unit.
• Refer to the instructions supplied with the device
to check the PIN code.
4 Use the Bluetooth device to connect.
Now connection is established and you can use the
device through the unit.
To connect a s ecial device
Perform steps 1 and 2 on page 14, then...
1 Select “SPECIAL.”
The unit displays the list of the preset devices.
EN14-21_KD-G737_001A_pre.indd 15EN14-21_KD-G737_001A_pre.indd 15 12/14/06 2:56:54 PM12/14/06 2:56:54 PM

ENGLISH
16
When a call comes in....
The source is automatically changed to “BT-PHONE.”
When “AUTO ANS” (answer is activated....
The unit answers the incoming calls automatically, see
page 28.
• When “AUTO ANS” (answer) is deactivated, press any
button (except /control dial) to answer the
incoming call.
To end the call
Hold any button (except /control dial).
• You can ad ust the microphone volume level (see
page 28).
When an SMS comes in....
If the cellular phone is compatible with SMS (Short
Message Service) and “MSG-INFO” (message info) is set
to “AUTO” (see page 28), the unit rings and “RCV MSG”
(receiving message) appears on the display to inform
you the arrival of the message.
Using the Bluetooth cellular hone
~ Select “BT-PHONE.”
Ÿ Enter Bluetooth menu.
! Make a call or settings using the Bluetooth menu. (See pages 17 and 28.
Change the display information
EN14-21_KD-G737_001A_pre.indd 16EN14-21_KD-G737_001A_pre.indd 16 12/14/06 2:56:55 PM12/14/06 2:56:55 PM

ENGLISH
17EXTERNAL DEVICES
You can preset up to six phone numbers.
1 Display the Dial Menu.
2 Select “PH BOOK,“ “MISSED,” or
“RECEIVED” whichever you want to use.
3 Select a phone number.
4
Making a call
You can make a call using the following methods.
Select “BT-PHONE,” then follow the following steps to make a call:
1 2 3 (unless mentioned otherwise)
Call history Display the Dial
Menu.
Select a call history.
REDIAL, RECEIVED, MISSED
Select a name (if it is acquired) or
phone number.
Phone book Select “PH BOOK.”
The list of phone number appears.
Select a name from the list.
Direct dialing Select “NUMBER.” Enter the phone number.
Voice command 1 “SAY NAME” appears on the display.
2 Speak the name you want to call.
• You can also use voice command from the Dial Menu. Select “VOICE” from the Dial Menu.
• If your cellular phone does not support the voice recognition system, “ERROR” appears on the
display.
Preset phone
number
See the following for settings.
Presetting the hone number
EN14-21_KD-G737_001A_pre.indd 17EN14-21_KD-G737_001A_pre.indd 17 12/14/06 2:56:56 PM12/14/06 2:56:56 PM

ENGLISH
18
Using the Bluetooth audio layer
~ Select “BT-AUDIO.”
If playback did not start automatically, operate the Bluetooth audio player to start playback.
• Refer also to page 15 for connecting/disconnecting/deleting a registered device.
Bluetooth Information:
If you wish to receive more information about Bluetooth, visit our JVC web site.
Listening to the CD changer
It is recommended to use a JVC MP3-compatible CD changer with your unit. You can connect a CD changer to the CD
changer ack on the rear of the unit. See also page 23.
• You can only play conventional CDs (including CD Text) and MP3 discs.
Change the display information
(see page 11)
Reverse skip/forward skip
Pause/start play back
Enter setting menu
(Device list
Change the display information
EN14-21_KD-G737_001A_pre.indd 18EN14-21_KD-G737_001A_pre.indd 18 12/14/06 2:56:57 PM12/14/06 2:56:57 PM

ENGLISH
19EXTERNAL DEVICES
Preparation
Make sure “CHANGER” is selected for the external input setting, see page 27.
~ Select “CD-CH.”
Ÿ Select a disc to start playing.
Press: For selecting disc number 1 – 6.
Hold: For selecting disc number 7 – 12.
Pressing (or holding) the following buttons allows you to...
Disc type
Press: Select track
Hold: Reverse/fast-forward track
Select folder
Press: Select track
Hold: Reverse/fast-forward track —
After pressing , press the following buttons to...
Disc type
Skip 10 tracks (within
the same folder)
TRK RPT:
Repeat current track
FLDR RPT:
Repeat all tracks of current folder
DISC RPT:
Repeat all tracks of the current
disc
FLDR RND:
Randomly play all tracks of
current folder, then tracks of
next folders
DISC RND:
Randomly play all tracks of
current disc
MAG RND:
Randomly play all tracks of the
inserted discs
Skip 10 tracks TRK RPT:
Repeat current track
DISC RPT:
Repeat all tracks of the current
disc
DISC RND:
Randomly play all tracks of
current disc
MAG RND:
Randomly play all tracks of the
inserted discs
• To cancel repeat play or random play, select “RPT OFF” or “RND OFF.”
EN14-21_KD-G737_001A_pre.indd 19EN14-21_KD-G737_001A_pre.indd 19 12/14/06 2:56:58 PM12/14/06 2:56:58 PM

ENGLISH
20
Listening to the DAB tuner
Change the display information
Select preset service.
You can connect a JVC DAB tuner to the CD changer jack on the rear of the unit. See also page 23.
~ Select “DAB.”
Ÿ Select the bands.
! Searching for an ensemble.
Manual Search: old either one of the buttons until “MANU” flashes on the display, then press it repeatedly.
⁄ Select a service (either primary or secondary) to listen to.
Storing DAB services in memory
While listening to a DAB service...
Activating/deactivating TA/PTY
Standby Reception
• Operations are exactly the same as explained on page
10 for FM RDS stations.
• You cannot store PTY codes separately for the DAB
tuner and for the FM tuner.
Tracing the same programme—
Alternative Freq ency Reception
• While receiving a DAB service
When driving in an area where a service cannot be
received, this unit automatically tunes in to another
ensemble or FM RDS station, broadcasting the same
programme.
• While receiving an FM RDS station
When driving in an area where a DAB service is
broadcasting the same programme as the FM RDS
station is broadcasting, this unit automatically tunes
in to the DAB service.
To deactivate the Alternative Frequency
Reception, see page 27.
EN14-21_KD-G737_001A_pre.indd 20EN14-21_KD-G737_001A_pre.indd 20 12/15/06 8:55:03 AM12/15/06 8:55:03 AM