JVC KD-R721BT User manual

ENGLISH
FRANÇAIS
GET0710-003A
[E/EU]
EN, FR
0111DTSMDTJEIN© 2011 Victor Company of Japan, Limited
KD-R721BT
CD RECEIVER / RÉCEPTEUR CD
For canceling the display demonstration, see page 4. / Pour annuler la démonstration des
affichages, référez-vous à la page 4.
INSTRUCTIONS
MANUEL D’INSTRUCTIONS
For installation and connections, refer to the separate manual.
Pour l’installation et les raccordements, se référer au manuel séparé.
Dear Customer,
This apparatus is in conformance with the valid
European directives and standards regarding
electromagnetic compatibility and electrical safety.
European representative of Victor Company of
Japan, Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
Cher(e) client(e),
Cet appareil est conforme aux directives et
normes européennes en vigueur concernant la
compatibilité électromagnétique et à la sécurité
électrique.
Représentant européen de la société Victor
Company of Japan, Limited:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Allemagne
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Vous avez des PROBLÈMES de fonctionnement?
Réinitialisez votre appareil
Référez-vous à la page intitulée Comment réinitialiser votre appareil
CoverRear_KD-R721BT_003A_2.indd 1-2CoverRear_KD-R721BT_003A_2.indd 1-2 12/29/10 8:52:25 AM12/29/10 8:52:25 AM

2ENGLISH
IMPORTANT FOR LASER PRODUCTS
1.CLASS 1 LASER PRODUCT
2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
3.CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with
optical instruments.
4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and
to obtain the best possible performance from the unit.
WARNING:
Stop the car before operating the unit.
Caution:
Adjust the volume so that you can hear sounds
outside the car. Driving with the volume too
high may cause an accident.
Caution on volume setting:
Digital devices (CD/USB) produce very little
noise compared with other sources. Lower the
volume before playing these digital sources to
avoid damaging the speakers by the sudden
increase of the output level.
Caution for DualDisc playback:
The Non-DVD side of a “DualDisc” does not
comply with the “Compact Disc Digital Audio”
standard. Therefore, the use of Non-DVD side
of a DualDisc on this product may not be
recommended.
Information for Users on Disposal of
Old Equipment and Batteries
[European Union only]
These symbols indicate that the product and
the battery with this symbol should not be
disposed as general household waste at its
end-of-life.
If you wish to dispose of this product and
the battery, please do so in accordance with
applicable national legislation or other rules
in your country and municipality.
By disposing of this product correctly, you
will help to conserve natural resources and
will help prevent potential negative effects
on the environment and human health.
Notice:
The sign Pb below the symbol for batteries
indicates that this battery contains lead.
Products
Battery
EN02-29_KD-R721BT_003A_2.indd 2EN02-29_KD-R721BT_003A_2.indd 2 12/29/10 8:52:41 AM12/29/10 8:52:41 AM

3ENGLISH
How to attach/detach the control
panel
How to reset your unit
Your preset adjustments will
also be erased.
How to forcibly eject a disc
• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.
Maintenance
Cleaning the unit
Wipe off the dirt on the panel with a dry silicon
or soft cloth. Failure to observe this precaution
may result in damage to the unit.
Cleaning the connector
Wipe off dirt on the connector of the unit and
panel. Use a cotton swab or cloth.
JVC bears no responsibility for any loss of data
in an iPod/iPhone and/or USB mass storage
class device while using this System.
CONTENTS
3 How to attach/detach the control
panel
3 How to reset your unit
3 How to forcibly eject a disc
3 Maintenance
4 Canceling the display
demonstration
4 Setting the clock
5 Preparing the remote controller
5 About discs
6 Basic operations
7 Listening to the radio
9 Listening to a disc
11 Listening to a USB device
12 Using Bluetooth® devices
13 Connecting a Bluetooth device
14 Using a Bluetooth mobile phone
17 Using a Bluetooth audio player
18 Changing the Bluetooth settings
19 Listening to an iPod/iPhone
21 Listening to the other external
components
22 Selecting a preset sound mode
23 Menu operations
25 Troubleshooting
29 Specifications
Condensation : When the car is air-
conditioned, moisture may collect on the
laser lens. This may cause disc read errors. In
this case, remove the disc and wait for the
moisture to evaporate.
Temperature inside the car : If you have
parked the car for a long time in hot or cold
weather, wait until the temperature in the car
becomes normal before operating the unit.
[Hold]
EN02-29_KD-R721BT_003A_2.indd 3EN02-29_KD-R721BT_003A_2.indd 3 12/29/10 8:52:42 AM12/29/10 8:52:42 AM

4ENGLISH
1 Turn on the power.
2
3
Setting the clock
4 Select <DEMO OFF>.
5
6 Finish the procedure.
Canceling the display demonstration
(Initial setting)
(Initial setting)
[Hold]
1 Turn on the power.
2
3 Select <CLOCK>.
4 Select <CLOCK SET>.
5 Adjust the hour.
6 Adjust the minute.
7 Select <24H/12H>.
8 Select <24 HOUR> or
<12 HOUR>.
9 Finish the procedure.
[Hold]
(Initial setting)
(Initial setting)
EN02-29_KD-R721BT_003A_2.indd 4EN02-29_KD-R721BT_003A_2.indd 4 12/29/10 8:52:42 AM12/29/10 8:52:42 AM

5ENGLISH
Caution:
• Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
• Battery shall not be exposed to excessive heat
such as sunshine, fire, or the like.
Warning (to prevent accidents and
damage):
• Do not install any battery other than CR2025
or its equivalent.
• Do not leave the remote controller in a place
(such as dashboards) exposed to direct
sunlight for a long time.
• Store the battery in a place where children
cannot reach.
• Do not recharge, short, disassemble, heat the
battery, or dispose of it in a fire.
• Do not leave the battery with other metallic
materials.
• Do not poke the battery with tweezers or
similar tools.
• Wrap the battery with tape and insulate when
throwing away or saving it.
Preparing the remote controller
About discs
When you use the remote controller for the first
time, pull out the insulation sheet.
If the effectiveness of the remote controller
decreases, replace the battery.
Replacing the lithium coin battery
This unit is equipped with the steering wheel
remote control function.
• For details, refer also to the instructions
supplied with the remote adapter.
Insulation sheet
This unit can only play the CDs with:
Discs that cannot be used:
• Discs that are not round.
• Discs with coloring on the recording surface
or discs that are dirty.
• You cannot play a Recordable/ReWritable
disc that has not been finalized. (For the
finalization process refer to your disc writing
software, and your disc recorder instruction
manual.)
• 8 cm CD cannot be used. Attempt to insert
using an adapter can cause malfunction.
Handling discs:
• Do not touch the recording surface of the
disc.
• Do not stick tape etc. on the disc, or use a disc
with tape stuck on it.
• Do not use any accessories for the disc.
• Clean from the center of the disc and move
outward.
• Clean the disc with a dry silicon or soft cloth.
Do not use any solvents.
• When removing discs from this unit, pull them
out horizontally.
• Remove the rims from the center hole and
disc edge before inserting a disc.
EN02-29_KD-R721BT_003A_2.indd 5EN02-29_KD-R721BT_003A_2.indd 5 12/29/10 8:52:43 AM12/29/10 8:52:43 AM

6ENGLISH
Basic operations
Control dial Ejects the disc
Loading slot
Remote sensor
• DO NOT expose to
bright sunlight.
Display window
AUX (auxiliary) input jack
Detaches the panel
When you press or hold the following button(s)...
Main unit Remote
controller General operation
/SOURCE
—• Turns on.
• Turns off [Hold].
SOURCE Selects the available sources (if the power is turned on).
• If the source is ready, playback also starts.
Control dial
(turn)
VOL – / + Adjusts the volume level.
— Selects items.
Control dial
(press)
Mutes the sound or pauses during playback.
• Press the button again to cancel muting or resume playback.
— Confirms selection.
EQ SOUND
Selects the sound mode.
• Hold the EQ button on the main unit to enter tone level adjustment
directly. (page 22)
—
• Enters “Hands-Free” screen or answers incoming call when the unit
rings. (page 14, 16)
• Ends a call [Hold].
USB (Universal Serial
Bus) input terminal
EN02-29_KD-R721BT_003A_2.indd 6EN02-29_KD-R721BT_003A_2.indd 6 12/29/10 9:33:43 AM12/29/10 9:33:43 AM

7ENGLISH
Improving the FM reception
1
2
] <TUNER> ] <MONO> ] <MONO ON>
Reception improves, but stereo effect will
be lost.
To restore the stereo effect, repeat the same
procedure to select <MONO OFF>.
Listening to the radio
Main unit Remote
controller General operation
T/P BACK —
• Activates/deactivates TA Standby Reception. (page 8)
• Enters PTY Searching mode [Hold]. (page 8)
• Selects the controlling terminal of an iPod/iPhone [Hold]. (page 19)
• Returns to the previous menu.
DISP —• Changes the display information.
• Scrolls the display information [Hold].
[Hold]
~
] “FM” or “AM”
Ÿ• [Press] Searches for stations automatically.
• [Hold] Searches for stations manually.
“M” flashes, then press the button
repeatedly.
“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.
Continued...
Automatic presetting (FM)—
SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.
While listening to a station...
1
2
] <TUNER> ] <SSM> ]
<SSM 01 – 06 / 07 – 12 / 13 – 18>
“SSM” flashes and local stations with the
strongest signal are searched and stored
automatically.
To preset another 6 stations, repeat the
above procedure by selecting one of the other
SSM setting ranges.
[Hold]
EN02-29_KD-R721BT_003A_2.indd 7EN02-29_KD-R721BT_003A_2.indd 7 12/29/10 8:52:44 AM12/29/10 8:52:44 AM

8ENGLISH
Manual presetting (FM/AM)
You can preset up to 18 stations for FM and
6 stations for AM.
1
] Tune in to a station you want to
preset.
2
“PRESET MODE” flashes.
3
] Selects a preset number.
Preset number flashes and “MEMORY”
appears.
Selecting a preset station
or
1
2
Using the remote controller
5 / ∞ : Changes the preset stations.
2 / 3 : [Press] Searches for stations
automatically.
[Hold] Searches for stations manually.
Changing the display information (for
non-Radio Data System station)
Frequency Clock
[Hold]
Searching for your favourite
FM Radio Data System
programme—PTY Search
You can tune in to a station broadcasting your
favourite programme by searching for a PTY
code.
1
The last selected PTY code appears.
2
] Select one of your favourite
programme types or a PTY code
(page 9), and start searching.
If there is a station broadcasting a
programme of the same PTY code as you
have selected, that station is tuned in.
Standby receptions
TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from
any source other than AM.
• If the volume is adjusted during reception of
traffic announcement, the adjusted volume
is memorized automatically. It will be applied
the next time Traffic Announcement function
is turned on.
To activate TA Standby Reception
If the TP indicator lights up, TA
Standby Reception is activated.
If the TP indicator flashes, TA
Standby Reception is not yet
activated.
• To activate the reception, tune in to another
station providing Radio Data System signals
required for TA Standby Reception.
• To deactivate the reception, press T/P BACK
again.
The following features are available only
for FM Radio Data System stations.
[Hold]
EN02-29_KD-R721BT_003A_f.indd 8EN02-29_KD-R721BT_003A_f.indd 8 1/13/11 9:47:00 AM1/13/11 9:47:00 AM

9ENGLISH
Listening to a disc
Stopping playback and ejecting the disc
If the ejected disc is not removed within 15 seconds, it will automatically reload into
the loading slot.
NEWS Standby Reception
NEWS Standby Reception allows the unit to
switch temporarily to your NEWS programme
from any source other than AM.
To activate NEWS Standby Reception, see
<NEWS-STBY>. (page 24)
The unit will not switch to Traffic
Announcement or NEWS Standby Reception
when a call connection is established through
“BT-PHONE.”
Tracing the same programme—
Network-Tracking Reception
When driving in an area where FM reception is
not sufficient enough, this unit automatically
tunes in to another FM Radio Data System
station of the same network, possibly
broadcasting the same programme with
stronger signals.
To change the Network-Tracking Reception
setting, see <AF-REG>. (page 24)
Continued...
Automatic station selection—
Programme Search
Usually when you select a preset number, the
station preset in that number is tuned in.
If the signals from the FM Radio Data System
preset station are not sufficient for good
reception, this unit, using the AF data, tunes in
to another frequency possibly broadcasting the
same programme as the original preset station
is broadcasting.
To activate Programme Search, see
<P-SEARCH>. (page 24)
Changing the display information
Station name (PS) = Station
Frequency = Programme type
(PTY) = Clock = (back to the
beginning)
PTY codes: NEWS, AFFAIRS, INFO, SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, POP M (music),
ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHER M (music), WEATHER, FINANCE, CHILDREN,
SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music),
DOCUMENT
~
] Turns on the power.
Ÿ
Playback starts automatically.
All tracks will be played repeatedly until you change the
source or eject the disc.
EN02-29_KD-R721BT_003A_2.indd 9EN02-29_KD-R721BT_003A_2.indd 9 12/29/10 8:52:44 AM12/29/10 8:52:44 AM

10 ENGLISH
Basic operations
Selects folder of the MP3/WMA.
[Press] Selects track.
[Hold] Fast-forwards or
reverses the track.
Using the remote controller
5 / ∞ : Selects folder of the MP3/WMA.
2 / 3 : [Press] Selects track.
[Hold] Fast-forwards or reverses the
track.
Selecting a track/folder from the
list
• If the MP3/WMA disc contains many tracks,
you can fast search (±10, ±100, ±1 000)
through the disc by turning the control dial
quickly.
• To return to the previous menu, press
T/P BACK.
For MP3/WMA disc, you can also use the search
menu (A to Z, 0 to 9, and OTHERS) to scroll
through the list menu.
• “OTHERS” appears if the 1st character is not
A to Z, or 0 to 9, such as #, —, !, and etc.
While in list menu....
1 Press 5 / ∞ to show the search menu.
The first character of the current folder/file
name appears.
2 Press 5 / ∞ to select your desired
character. Then press the control dial to
confirm.
The track list with the selected character
appears.
3 Turn the control dial to select your
desired track. Then press the control dial
to confirm.
• Only the existing characters will be shown on
the search menu.
• Press and hold 5 / ∞ to continuously change
the character of the search menu.
• If your disc contains many tracks, searching
take some time.
Selecting the playback modes
You can use only one of the following playback
modes at a time.
1
2
] “REPEAT” j “RANDOM”
3
REPEAT
TRACK RPT : Repeats current track
FOLDER RPT : Repeats current folder
RANDOM
FOLDER RND : Randomly plays all tracks of
current folder, then tracks of next folders
ALL RND : Randomly plays all tracks
To cancel repeat play or random play, select
“RPT OFF” or “RND OFF.”
Changing the display information
Disc title/Album name/performer (folder
name)* = Track title (file name)* = Current
track number with the elapsed playing time =
Current track number with the clock time =
(back to the beginning)
* “NO NAME” appears for conventional CDs or if not
recorded.
[Hold]
EN02-29_KD-R721BT_003A_2.indd 10EN02-29_KD-R721BT_003A_2.indd 10 12/29/10 8:52:45 AM12/29/10 8:52:45 AM

11ENGLISH
This unit is equipped with two USB input terminals (on the control panel and USB cable from the
rear of the unit). You can use these two terminals at the same time.
You can operate the USB device in the same way you operate the files on a disc. (page 9,
10)
• This unit can play MP3/ WMA/ WAV files stored in a USB mass storage class device (such as a USB
memory, Digital Audio Player, etc.).
~
] Turns on the power.
Ÿ
All tracks will be played repeatedly until you change the source or disconnect the USB device.
Listening to a USB device
USB cable (not supplied)
USB input terminal
USB cable from the
rear of the unit
Cautions:
• Make sure all important data has been backed
up.
• You cannot connect a computer or portable
HDD to the USB input terminal of the unit.
• Avoid using the USB device if it might hinder
your safety driving.
• Electrostatic shock at connecting a USB device
may cause abnormal playback of the device.
In this case, disconnect the USB device then
reset this unit and the USB device.
• Do not leave a USB device in the car, expose
to direct sunlight, or high temperature to
avoid deformation or cause damages to the
device.
• This unit may not play back files in a USB
device properly when using a USB extension
cord.
• USB devices equipped with special functions
such as data security functions cannot be
used with the unit.
• When connecting a USB cable, use the
USB 2.0 cable.
• Do not use a USB device with 2 or more
partitions.
• Depending on the shape of the USB devices
and connection ports, some USB devices may
not be attached properly or the connection
might be loose.
• This unit cannot recognize a USB device
whose rating is other than 5 V and exceeds
1 A.
• Do not pull out and attach the USB device
repeatedly while “READING” is shown on the
display.
• This unit may not recognize a memory card
inserted into the USB card reader.
• Connect only one USB device to the unit at a
time. Do not use a USB hub.
• Operation and power supply may not work as
intended for some USB devices.
• For additional information, see page 28.
and/or
EN02-29_KD-R721BT_003A_2.indd 11EN02-29_KD-R721BT_003A_2.indd 11 12/29/10 9:34:05 AM12/29/10 9:34:05 AM

12 ENGLISH
Using Bluetooth® devices
Bluetooth is a short-range wireless radio communication technology for the mobile device such
as mobile phones, portable PCs, and other devices. The Bluetooth devices can be connected
without cables and communicate with each other.
• Refer to pages iand ii at the end of the manual to check the countries where you may use the
Bluetooth® function.
This unit supports the following Bluetooth profiles
• HFP (Hands-Free Profile) 1.5
• OPP (Object Push Profile) 1.1
• PBAP (Phonebook Access Profile) 1.0
• A2DP (Advanced Audio Distribution Profile) 1.2
• AVRCP (Audio/Video Remote Control Profile) 1.3
To use a Bluetooth device with this unit, connect the supplied USB Bluetooth Adapter (KS-UBT1)
to one of the USB input terminals of the unit. Once the USB Bluetooth Adapter is attached, this
unit is always available for pairing.
• Only one USB Bluetooth Adapter can be detected at a time.
• Refer also to the instructions supplied with the Bluetooth device.
Additional information
• If you wish to perform complicated operations (such as dialing the numbers, using phonebook, etc.), stop your car in
a safe place.
• Some Bluetooth devices may not be connected to this unit depending on the Bluetooth version of the device.
• If you connect a different USB Bluetooth Adapter, all the registered devices and information will be cleared.
• This unit may not work for some Bluetooth devices.
• Connecting condition may vary depending on the circumstances around you.
• If you turn off the unit, detach the control panel, or unplug the USB Bluetooth Adapter during a phone call
conversation, the Bluetooth connection is disconnected. Continue the conversation using your mobile phone.
• When the unit is turned off, the device is disconnected.
• If you wish to receive more information about Bluetooth, visit the following JVC web site:
<http://www.jvc.co.jp/english/car/index.html> (English website only).
EN02-29_KD-R721BT_003A_2.indd 12EN02-29_KD-R721BT_003A_2.indd 12 12/29/10 8:52:45 AM12/29/10 8:52:45 AM

13ENGLISH
If “PAIRING” appears...
] Operate the Bluetooth device to
accept.
If “PAIRING” = “PIN 0000” scrolls on
the display.
] Enter a PIN (Personal Identification
Number) code to the Bluetooth device.
•
You can change the PIN code of your choice
before pairing. (page 18) [ Initial: 0000 ]
(B) If “BT PAIRING” flashes, then
“[Device name]” = “XXXXXX” =
“VOL – YES” = “BACK – NO” scrolls on
the display.
] Check to be sure the passkey appears
on the unit and Bluetooth device is the
same. Then, confirm the passkey on the unit
by pressing the control dial. Operate the
Bluetooth device to confirm the passkey.
• “XXXXXX” is a 6-digit numeric code that
appear in different combination (even if the
device is the same) each time pairing is made.
5After pairing is successful, the unit will
establish Bluetooth connection with the
Bluetooth device*. ( lights up on the
display.)
• The device remains registered even
after you disconnect the device. Use
<CONNECT PH/ CONNECT AU> (or activate
<AUTO CNNCT>, page 18) to connect the
same device from next time on.
* Some devices may not be able to connect to the
unit after pairing. Connect the device to the
unit manually.
When you connect a Bluetooth device to the unit for the first time, make pairing between the unit
and the device.
• Once the connection is established, it is registered in the unit even if you reset the unit. Up to five
devices can be registered in total. “PAIRING FULL” scrolls on the display if you tried to pair the 6th
device.
• This unit supports Secure Simple Pairing (SSP).
• Pairing sequence may be different from what is described below.
• A maximum of two devices for Bluetooth phone and one for Bluetooth audio can be connected
at a time.
1
] Turns on the power.
2
] Make sure USB Bluetooth Adapter
is connected to one of the USB input
terminals.
3Use the Bluetooth device to search and
select “JVC Unit.”
• For some Bluetooth devices, you may
need to enter the PIN code first after
search.
4Perform one of the following pairing
operations (what appear depends on the
Bluetooth device pairing process).
(A) If “BT PAIRING” flashes, then
“[Device name]” = “VOL – YES” =
“BACK – NO” scrolls on the display.
] Select “YES” to start the pairing
process.
Connecting a Bluetooth device
Continued...
USB input terminal
KS-UBT1
or
USB cable from the
rear of the unit
EN02-29_KD-R721BT_003A_f.indd 13EN02-29_KD-R721BT_003A_f.indd 13 1/13/11 9:47:08 AM1/13/11 9:47:08 AM

14 ENGLISH
Making a call
1
] Enter “Hands-Free” screen.
2
] Select a calling method or make
a setting. (DIALED/ RECEIVED/
MISSED CALL/ PHONEBOOK/
DIAL NUMBER/ VOICE/ SETTINGS)
3If DIALED/ RECEIVED/ MISSED CALL/
PHONEBOOK is selected in step 2...
Turn the control dial to select the name/
phone number you want to call, then
press the control dial to confirm.
• “NO HISTORY” appears if there is no
history stored.
• “NO DATA” or “SEND P. BOOK”
j
“MANUALLY” appears depending on the
“P. BOOK SEL” settings. (page 15)
If DIAL NUMBER is selected in step 2...
Enter the phone number to dial.
Turn the control dial to select a number
or character (see table below), press
4 / ¢ to move to the entry
position. Once you finished entering the
number, press the control dial to confirm.
If VOICE is selected in step 2...
Speak the name (registered words) you
want to call when “WAIT VOICE” =
“[Device name]” scrolls on the display.
• Press and hold to activate voice dial
operation directly if only one phone is
connected.
If two phones are connected, pressing
and holding will enter “Phone list”
screen. Turn the control dial to select a
phone to activate voice dial operation,
then press to confirm.
• Only accessible when the connected
mobile phone has the voice recognition
system.
• “NOT SUPPORT” appears if the
connected phone does not support this
feature.
To delete a registered device
1 Press and hold MENU.
2 Turn the control dial to select
<BLUETOOTH>, then press to confirm.
3 Turn the control dial to select
<DELETE PAIR>, then press to confirm.
4 Turn the control dial to select a device
you want to delete, then press to confirm.
5 Turn the control dial to select
<DELETE YES>, then press to confirm.
“DELETED” appears when the device is
deleted.
If <DELETE NO> is selected, the unit returns
to step 4 above.
Using a Bluetooth mobile phone
To connect/disconnect a registered device
1 Press and hold MENU.
2 Turn the control dial to select
<BLUETOOTH>, then press to confirm.
3 Turn the control dial to select
<CONNECT PH/ CONNECT AU> or
<DISCONNT PH/ DISCONNT AU>, then
press to confirm.
4 Turn the control dial to select a device
you want to connect/disconnect, then
press to confirm.
“CONNECTED/ DISCONNECT” = “[Device
name]” scrolls on the display when the
device is connected/disconnected.
EN02-29_KD-R721BT_003A_f.indd 14EN02-29_KD-R721BT_003A_f.indd 14 1/7/11 2:20:55 PM1/7/11 2:20:55 PM

15ENGLISH
If SETTINGS is selected in step 2...
Turn the control dial to select an item (see
the following), then press the control dial
to confirm.
The following settings are applicable to
the paired device. If another device is
paired, make the settings again.
• P. BOOK SEL *
PB IN PHONE [Initial] : The unit browses the
phonebook of the connected phone.
PB IN UNIT : The unit browses the phonebook
registered in the unit. (To copy the phonebook
memory, see <P. BOOK WAIT> on page 18.)
• If the phonebook contains many numbers, you
can fast search (±10, ±100, ±1 000) through
the phonebook by turning the control dial
quickly.
• To search through the phonebook, see the right
column.
* Selectable only when the connected phone
supports PBAP.
•
AUTO ANSWER
ON : The unit answers the incoming calls
automatically. /
OFF [Initial] : The unit does not
answer the calls automatically. Press or the
control dial to answer.
• RING TONE
IN UNIT [Initial] : The unit rings to alert you
when a call/Text Message comes in.
– CALL : Select your preferred ring tone when a
call comes in [ TONE1 — 5 ].
– MESSAGE : Select your preferred ring
tone when a text message comes in
[ TONE1 — 5 ].
• Default ring tone is different according to the
paired device.
IN PHONE : The unit rings using the connected
phones’ ring tone to alert you when a call/Text
Message comes in. (The connected mobile phone
rings if it does not support this feature.)
• NR/EC MODE
ON [Initial] : The unit adjusts the Noise
Reduction and Echo Cancellation of the
microphone connected to the unit for clearer
sound. /
OFF : Cancels.
• MIC LEVEL
Adjust the sensitivity [ 01 / 02 / 03 ] of the
microphone connected to the unit. [ Initial:
02 ]
• MSG NOTICE
ON [Initial] : The unit informs you of the
arrival of a message by ringing and displaying
“RCV MESSAGE”
= “[Device name].” /
OFF : The unit does not inform you of the arrival
of a message.
To select a contact from the phonebook
1 Select PHONEBOOK calling method.
2 Press 5 / ∞ to show the search menu
(A to Z, 0 to 9, and OTHERS).
“OTHERS” appear if the 1st character is not
A to Z, or 0 to 9, such as #, —, !, and etc.
3 Press 5 / ∞ to select your desired
character, then press the control dial to
confirm.
The name list of the selected character
appears.
4 Turn the control dial to select your
desired contact, then press to confirm.
• Only the existing characters will be shown on
the search menu.
• Press and hold 5 / ∞ to continuously change
the character of the search menu.
• If your phonebook contains many contacts,
searching take some time.
Continued...
EN02-29_KD-R721BT_003A_f.indd 15EN02-29_KD-R721BT_003A_f.indd 15 1/13/11 9:47:14 AM1/13/11 9:47:14 AM

16 ENGLISH
Using the remote controller
5 / ∞ / 2 / 3 /SOURCE :[Press] Answers calls.
[Hold] Rejects calls.
To switch conversation media (the unit/
mobile phone)
Press the control dial during a phone call
conversation, then continue your conversation
using the other media.
• Operations may be different according to the
connected Bluetooth device.
To switch between two connected mobile
phones
When two mobile phones are connected to
the unit, you can access to both “Hands-Free”
screens.
Press to access to the 1st phone’s
“Hands-Free” screen, press again to access to
the 2nd phone’s “Hands-Free” screen.
• To return to the 1st phone’s “Hands-Free”
screen, press T/P BACK.
Arriving of a text message
When a text message comes in, the unit rings
if your mobile phone is compatible with text
message and “MSG NOTICE” is set to “ON”
(page 15).
• You cannot read, edit, or send a message
through the unit.
To delete a contact (name/phone number)
Only when “PB IN UNIT” is selected for
“P. BOOK SEL.” (page 15)
1 Press to enter “Hands-Free” screen.
2 Display the list of name/phone numbers
using one of the calling methods.
(page 14)
3 Turn the control dial to select the name/
phone number you want to delete.
4 Press and hold T/P BACK to enter the
“Delete Entries” screen.
5 Turn the control dial to select “DELETE” or
“DELETE ALL.”
• If “DELETE” is selected, the selected name/
phone number in step 3 is deleted.
• If “DELETE ALL” is selected, the listed
numbers in step 2 selection are deleted.
6 Press the control dial to confirm.
Receiving/ending a phone call
When a call comes in, the source is
automatically changed to “BT FRONT/BT REAR.”
• “RECEIVING” appears for a while, then the
phone number or name appears.
When <AUTO ANSWER> is activated....
The unit answers the incoming calls
automatically.
• Press or the control dial to answer the
incoming call when <AUTO ANSWER> is
deactivated.
During a phone call conversation...
• Turn the control dial to adjust the phone
volume level (00 – 50). [ Initial: VOLUME 15 ]
The adjustment made will not affect the other
sources.
• Press 5 / ∞ to adjust the microphone
sensitivity (01 – 03). (As the number increases,
the microphone becomes more sensitive.)
• Press 4 / ¢ to turn on/off the
Noise Reduction and Echo Cancelation mode.
To end an incoming call, press and hold
or the control dial.
EN02-29_KD-R721BT_003A_2.indd 16EN02-29_KD-R721BT_003A_2.indd 16 12/29/10 8:52:46 AM12/29/10 8:52:46 AM

17ENGLISH
Selecting the playback modes
• For Bluetooth devices that support AVRCP 1.3.
1
2
] “REPEAT” j “RANDOM”
3
REPEAT
TRACK : Repeats current track
ALL : Repeats all tracks
GROUP : Repeats all tracks of the current
group
RANDOM
ALL : Randomly plays all tracks
GROUP : Randomly plays all tracks of the
current group
To cancel repeat play or random play, select
“OFF.”
Changing the display information
Album name/performer = Track title =
Current track number with the elapsed playing
time = Current track number with the clock
time = (back to the beginning)
[Hold]
Operations and display indications differ
depending on their availability on the
connected device.
] Select “BT FRONT” or
“BT REAR.”
If playback does not start automatically, operate
the Bluetooth audio player to start playback.
Basic operations
Starts or resumes playback.
Mutes the sound.
Selects group/folder.
[Press] Reverse skips or
forward skips.
[Hold] Fast-forwards or
reverses the track.
Using the remote controller
2 / 3 : [Press] Reverse skips or forward skips.
[Hold] Fast-forwards or reverses the
track.
Using a Bluetooth audio player
EN02-29_KD-R721BT_003A_2.indd 17EN02-29_KD-R721BT_003A_2.indd 17 12/29/10 8:52:46 AM12/29/10 8:52:46 AM

18 ENGLISH
1
2
] <BLUETOOTH>
3Repeat step 2to select a setting item (see
table below), then repeat the procedure
to change the setting accordingly.
• To return to the previous menu, press
T/P BACK.
• To exit from the menu, press MENU.
[Hold]
Menu item Selectable setting, [
Initial: Underlined ]
CONNECT PH*1/
CONNECT AU
Turn the control dial to select a device you want to connect. “CONNECTED” = “[Device Name]”
scrolls on the display when the device is connected.
DISCONNT PH/
DISCONNT AU
Turn the control dial to select a device you want to disconnect. “DISCONNECT” =
“[Device Name]” scrolls on the display when the device is disconnected.
DELETE PAIR Turn the control dial to select the device you want to delete, then press the control dial to confirm.
DELETE YES : Confirm to delete the selected device. / DELETE NO : Cancels.
P. BOOK WAIT You can copy the phonebook memory of a mobile phone into the unit (via OPP). You may need
to enter the PIN code or verify passkey from the mobile phone to do pairing. You can transfer a
maximum of 400 numbers.
SET PINCODE You can change the PIN code of your choice before pairing (1-digit to 6-digit number).
[ Initial:
0000 ]
Turn the control dial to select a number, press 4 / ¢ to move to the entry position,
then press the control dial to confirm the entry.
AUTO CNNCT ON : The connection is established automatically with the registered Bluetooth device when
you turn on the unit. / OFF : The unit does not connect the Bluetooth device automatically. Use
<CONNECT PH/ CONNECT AU> to connect.
INITIALIZE YES : Initialize all the Bluetooth settings (including stored pairing, phonebook, and etc.). /
NO : Cancels.
INFORMATION PH CNNT DEV*2 : Shows connected phone name. / AU CNNT DEV*2 : Shows
connected audio device name. / MY BT NAME : Shows the unit name (JVC Unit). /
MY ADDRESS : Shows address of USB Bluetooth Adapter.
*1 Will not display if two Bluetooth phones are connected at the same time.
*2 Displayed only when a Bluetooth phone/audio player is connected.
Changing the Bluetooth settings
EN02-29_KD-R721BT_003A_f.indd 18EN02-29_KD-R721BT_003A_f.indd 18 1/13/11 9:47:22 AM1/13/11 9:47:22 AM

19ENGLISH
Continued...
You can connect an Apple iPod/iPhone using the USB 2.0 cable (accessory of the iPod/iPhone) to
the USB input terminal on the control panel or USB cable from the rear of the unit.
~
] Turns on the power.
Ÿ
Playback starts automatically.
USB cable from the rear of the unit
USB 2.0 cable (accessory of the iPod/iPhone)
USB input terminal
Apple iPod/iPhone
Listening to an iPod/iPhone
and/or
Cautions:
• Avoid using the iPod/iPhone if it might hinder
your safety driving.
• Make sure all important data has been backed
up to avoid losing the data.
Selecting the control terminal
] <HEAD MODE/ IPOD MODE/ APP MODE>
• For details, see <IPOD SWITCH> setting on
page 25.
Basic operations
Applicable under <HEAD MODE/ IPOD MODE>.
For <APP MODE>, applicable only for some
audio applications.
[Press] Selects track/
chapter.
[Hold] Fast-forwards or
reverses the track.
Using the remote controller
2 / 3 : [Press] Selects track/chapter.
[Hold] Fast-forwards or reverses the
track.
[Hold]
Selecting a track from the menu
Not applicable under <IPOD MODE/
APP MODE>.
1
2
] Select the desired menu.
PLAYLISTS j ARTISTS j ALBUMS
j SONGS j PODCASTS j GENRES
j COMPOSERS j AUDIOBOOKS j
(back to the beginning)
3
] Select the desired track.
Repeat this step until the desired track
is selected.
• If the selected menu contains many tracks,
you can fast search (±10, ±100, ±1 000)
through the menu by turning the control dial
quickly.
• To return to the previous menu, press
T/P BACK.
EN02-29_KD-R721BT_003A_2.indd 19EN02-29_KD-R721BT_003A_2.indd 19 12/29/10 9:34:49 AM12/29/10 9:34:49 AM

20 ENGLISH
You can also use the search menu (A to Z and
0 to 9) to scroll through the desired menu.
After you have selected your desired menu (in
step 2on page 19)....
1 Press 5 / ∞ to show the search menu.
The first character of the current file name
appears.
2 Press 5 / ∞ to select your desired
character. Then press the control dial to
confirm.
The track list with the selected character
appears.
3 Turn the control dial to select your
desired track. Then press the control dial
to confirm.
• Only the existing characters will be shown on
the search menu.
• Press and hold 5 / ∞ to continuously change
the character of the search menu.
• If your iPod/iPhone contains many tracks,
searching take some time.
• Searching may not work on some of the layers
of the selected menu.
Changing the display information
Album name/performer = Track title =
Current track number with the elapsed playing
time = Current track number with the clock
time = (back to the beginning)
In <APP MODE> : APP MODE APP MODE
with clock time
Selecting the playback modes
Not applicable under <IPOD MODE/
APP MODE>.
1
2
] “REPEAT” j “RANDOM”
3
REPEAT
ONE RPT : Functions the same as “Repeat
One” of the iPod
ALL RPT : Functions the same as
“Repeat All” of the iPod
RANDOM
ALBUM RND : Functions the same as
“Shuffle Albums” of the iPod
SONG RND : Functions the same as
“Shuffle Songs” of the iPod
• To cancel repeat play or random play,
select “RPT OFF” or “RND OFF.”
• “ALBUM RND” is not available for some iPod/
iPhone.
• To return to the previous menu, press
T/P BACK.
Using the iPod/iPhone
application
You can operate JVC original application (eg.
JVC Drive Smart) with this unit in <APP MODE>.
For JVC Drive Smart operations, visit JVC web
site: <http://www.jvc.co.jp/english/car/index.
html> (English website only)
[Hold]
EN02-29_KD-R721BT_003A_3.indd 20EN02-29_KD-R721BT_003A_3.indd 20 1/4/11 3:32:27 PM1/4/11 3:32:27 PM