JVC DR-MV7SU Dimensions

ccDVD-R, DVD+R, DVD-RW and DVD+RW can be
used to record on your DR-MV7S.
DVD-RAM will not be recognized as record-
able media on your DR-MV7S.
The default setting is Auto Clock: OFF.
ccChange the setting to ON (Auto) by following
the instructions on page 20 of your owner’s
manual.
The clock on your DR-MV7S may not set automati-
cally in some geographical areas.
ccIf the clock does not set automatically even
when the Auto Clock is set ON (Auto), you
may set the clock manually by following the
instructions on page 21 of your owner’s man-
ual.
When the power to your DR-MV7S is interrupted
by power outage or by disconnecting AC Plug;
•The remote control code of the main unit
defaults to “C” code.
•The date and time information will be lost. If
the Auto Clock setting is ON (Auto), the
clock time will be automatically updated
when broadcast signal is available.
•If you have programmed timer recording,
that data will be lost and needs to be repro-
grammed.
ccPerform the setting again by referring to
each relevant page of owners manual.
Remote control code setting: page 24
Clock setting: page 20
Timer recording setting: page 37
When your DR-MV7S is first turned on, it will flash
“Hello” as the internal EPROM chip is updated with
information.
cPlease wait until “Hello” stops flashing before you
attempt to use the remote control or front panel
buttons. It takes 25-30 seconds until the set
can be operated when a disk is on the tray.
Your DR-MV7S has a progressive scan feature.
This feature only works with a TV that accepts a pro-
gressive scan signal.
ccIf the picture is distorted, press OUTPUT STA-
TUS button and select 480i.
There is no signal output other than HDMI when
HDMI is connected and 720p/1080i is selected at
OUTPUT STATUS.
ccPress OUTPUT STATUS button and select
either 480i or 480p in order to watch the video
signal from AV OUT, S-VIDEO OUT, COMPO-
NENT/PROGRESSIVE SCAN VIDEO OUT.
cYou must “Finalize” the DVD before it can play in
another DVD player.
Please see page 23 in your owner’s manual.
My newly recorded DVD plays in my
DR-MV7S but does not play in other DVD
players.
My DR-MV7S is showing no picture.
My DR-MV7S is showing a distorted picture.
When I turn on my DR-MV7S it flashes
“Hello” and all the buttons on the remote
control and the front panel will not respond
for 10 - 15 seconds. Is this normal?
Remote control unit does not work.
Timer Recording does not work.
The Clock on my DR-MV7S is not setting
automatically. I am not using a cable box.
Is this a malfunction?
What DVDs can I use to record on my
DR-MV7S?
Thank you for your purchase of the JVC DR-MV7S VHS/DVD Player/Recorder.
If you have any questions regarding the hookup or operation of your DR-MV7S, please contact our
Customer Care Center at 1-800-252-5722.
Please Note:
Be sure to connect the AC power plug into the power outlet after all other connections are completed.
DR-MV7S Quick Guide FAQ’s
JVC Customer Care Center
1-800-252-5722
For additional troubleshooting tips please refer to pages 51-53 in your owners manual.
LPT1133-003A
0606MNH-LG-LG
3840R-L005U