JVC LT-24CM79W User manual

Instruction Manual
24" FULL HD
IPS LED MONITOR
LT-24CM79W

3
Contents
Safety Warnings........................................................................................................................4
Unpacking..................................................................................................................................7
Installing / Removing the Base Stand ....................................................................................8
Assembling the Base ........................................................................................................................................ 8
Product Overview .....................................................................................................................9
Main Unit............................................................................................................................................................... 9
Connection ..............................................................................................................................10
Adjusting the Angle................................................................................................................11
Basic Operating.......................................................................................................................12
Joystick Function Button ..............................................................................................................................12
Auto Adjust Image (VGA Signal).................................................................................................................12
Eco Friendly Function..................................................................................................................................... 13
Customizing Settings .............................................................................................................13
Maintenance............................................................................................................................15
Cleaning the Unit.............................................................................................................................................15
Hints and Tips..........................................................................................................................15
Product Fiche and Specifications..........................................................................................17
Useful Information and Licences...........................................................................................19

4
Safety Warnings
• Only use the screws supplied with the wall
mount bracket when attaching the monitor
to the bracket. See your monitor instructions
for screw type.
• Tighten the wall mount screw rmly to
prevent the monitor from falling. Do not over
tighten the screws.
• If you are in any doubt how to mount your
monitor, contact a professional.
Temperature
• Avoid extreme degrees of temperature,
either hot or cold. Place the unit well away
from heat sources such as radiators or gas /
electric res.
• Avoid exposure to direct sunlight and other
sources of heat.
Naked Flames
• Never place any type of candle or naked
ame on the top of or near the unit.
Moisture
• To reduce the risk of re, electric shock or
product damage, do not expose this unit
to rain, moisture, dripping or splashing. No
objects lled with liquids, such as vases,
should be placed on the unit.
• If you spill any liquid into the unit, it can
cause serious damage. Switch it o at the
mains immediately. Withdraw the mains plug
and consult your dealer.
Ventilation
• To prevent the risk of electric shock or re
hazard due to overheating, ensure that
curtains and other materials do not obstruct
the ventilation vents.
• A minimum distance of 5 cm around the unit
should be maintained to allow for sucient
ventilation.
• Do not install or place this unit in a bookcase,
built-in cabinet or in another conned space.
Ensure the unit is well ventilated.
Safety
• Always disconnect the unit from the mains
supply before connecting / disconnecting
other devices or moving the unit.
• Unplug the unit from the mains socket
during a lightning storm and long inactivity
periods (going on holiday).
• Read all the instructions carefully before
using the unit and keep them for future
reference.
• Retain the manual. If you pass the unit onto a
third party make sure to include this manual.
• Check that the voltage marked on the rating
label matches your mains voltage.
• WARNING: Never let people (including
children) with reduced physical, sensory or
mental capabilities or lack of experience
and / or knowledge use electrical devices
unsupervised.
• To avoid danger of suocation, keep plastic
bags out of reach of babies, children and
domestic animals.
• Carefully attach the stand to the monitor. If
the stand is provided with screws, tighten
the screws rmly to prevent the Monitor
from tilting. Do not over tighten the screws
and mount the stand rubbers properly.
Damage
• Please inspect the unit for damage after
unpacking.
• Do not continue to operate the unit if you
are in any doubt about it working normally,
or if it is damaged in any way - switch o,
withdraw the mains plug and consult your
dealer.
Location of Unit
• The unit must be placed on a at stable
surface and should not be subjected to
vibrations.
• Do not place the unit on sloped or unstable
surfaces as the unit may fall o or tip over.
• The mains socket must be located near the
unit and should be easily accessible.
• This unit is designed for indoor, domestic
use only.
• Use this monitor set at an altitude of less
than 2000 meters above sea level, in dry
locations and in regions with moderate or
tropical climates.
Wall Mounting
• Read the monitor and wall mount
instructions before mounting your monitor
on the wall.
• The wall mount bracket is not supplied, they
can be purchased from your dealer.
• Do not install the monitor on a ceiling or an
inclined wall.

5
• In the interests of safety and to avoid
unnecessary energy consumption, never
leave the unit switched on while unattended
for long periods of time, e.g. overnight, while
on holiday or while out of the house. Switch
it o and disconnect the mains plug from the
mains socket.
Mains Adapter Cable
• Make sure the unit or unit stand is not
resting on top of the mains cable, as the
weight of the unit may damage the mains
cable and create a safety hazard.
• A damaged power cord/plug can cause re
or give you an electric shock. Handle the
power cord by the plug, do not unplug the
monitor by pulling the power cord.
• Never touch the power cord/plug with wet
hands as this could cause a short circuit or
electric shock.
• Never make a knot in the power cord or tie it
with other cords.
• If the mains cable is damaged it must be
replaced by the manufacturer, its service
agent, or similarly qualied persons in order
to avoid a hazard.
• The mains adapter will continue to draw
electricity from the mains supply when
plugged in the mains socket. In the
interests of safety and to avoid unnecessary
energy consumption, never leave the
adapter plugged in the mains socket
while unattended for long periods of time.
Disconnect the adapter from the power
supply.
Use only power supplies listed in the user
instructions.
Interference
• Do not place the unit on or near appliances
which may cause electromagnetic
interference. If you do, it may adversely aect
the operating performance of the unit, and
cause a distorted picture or sound.
Optimum viewing
• View the unit in moderate light to prevent
eye strain. It is recommended to watch the
unit from a distance
3-7 times that of the screen height.
LCD screen
• The LCD screen is manufactured using
high-precision technology. However, some
tiny black points and / or bright points (red,
blue or green in colour) may constantly
appear on the LCD screen. These points are
generated in the manufacturing process and
are normal.
Screen Burn
• A characteristic of Plasma and Monitor
Panels is that displaying the same image
for a long time may cause a permanent
after-image to remain on the screen. This is
called screen burn. Most pictures shown on
the unit will be constantly moving and ll
the screen.
• To prevent screen burn if viewing any of
the above for long periods of time, reduce
contrast and brightness when viewing.
Once burn-in occurs it will never disappear
completely.
Standby
• The button on the unit does not switch o
the unit completely. The unit will continue to
draw electricity from the mains supply while
in standby. In the interests of safety and to
avoid unnecessary energy consumption,
never leave the unit in standby while
unattended for long periods of time, e.g.
overnight, while on holiday or while out of
the house. Disconnect the mains plug from
the mains socket.
Supervision
• Children should be supervised to ensure that
they do not play with the unit.
• Never let anyone especially children push
anything into the holes, slots or any other
openings in the case - this could result in a
fatal electric shock.
Earthing
• Apparatus connected to the protective
earthing of the building installation through
the MAINS connection or through other
apparatus with a connection to protective
earthing - and to a monitor distribution
system using coaxial cable, may in some
circumstances create a re hazard.
Connection to a monitor distribution system
has therefore to be provided through a
device providing electrical isolation below
a certain frequency range (galvanic isolator,
see EN 60728-11).

6
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning ash with arrowhead
symbol, within an equilateral
triangle, is intended to alert the user
to the presence of uninsulated
“dangerous voltage” within the unit’s
enclosure that may be of sucient
magnitude to constitute a risk of
electric shock.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing) instructions
in the manual accompanying the
unit.
Service
• To reduce the risk of electric shock, do not
remove screws. The unit does not contain
any user-serviceable parts. Please leave all
maintenance work to qualied personnel.
• Do not open any xed covers as this may
expose dangerous voltages.
Maintenance
• Ensure to unplug the unit from the mains
socket before cleaning.
• Do not use any type of abrasive pad or
abrasive cleaning solutions as these may
damage the unit’s surface.
• Do not use liquids to clean the unit.
• The wall socket plug is used as a disconnect
device, the disconnect device should be
readily accessible.
• This equipment is a Class II or double
insulated electrical appliance. It has
been designed in such a way that it
does not require a safety connection to
electrical earth.
To prevent the
spread of re,
keep candles or
other open ames
away from this
product at all
times.

7
Unpacking
Remove all items from the packaging. Retain the packaging. If you dispose of it please do so
according to local regulations.
The following items are included:
Thank you for purchasing your new JVC LED Monitor.
We recommend that you spend some time reading this instruction manual
in order that you fully understand all the operational features it oers. You
will also nd some hints and tips to help you resolve any issues.
Read all the safety instructions carefully before use and keep this
instruction manual for future reference.
Main Unit Base Screw
Instruction ManualMains Adapter CableHDMI Cable
• If items are missing, or damaged please contact Partmaster (UK only). Tel: [phone] for assistance.
• If you require additional assistance:
For UK, please call our UK Call Centre on 0344 561 1234.
For Ireland, please call our Ireland Call Center on 1 890 818 575.

8
Installing / Removing the Base Stand
The LCD display is very fragile, and must be protected at all times when installing and removing the
base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD
display, comes into contact with it. DO NOT exert pressure on the front of the monitor at any time
because the screen could crack.
Disconnect all cables connected to the monitor.
Lay the monitor down on a at surface with the back side facing up, and ideally at the edge
of a table so that the base of the monitor slightly overhangs on it. Please make sure a soft
cushioned material (such as a towel or thick piece of foam) is placed beneath the screen. Leave
the protective bag on your monitor until you have fully attached the monitor stand.
Assembling the Base
To install the base, align the screw hole, then secure with the screw provided.
• Please read this instruction manual carefully while setting up your monitor.
• If you require additional assistance:
For UK, please call our UK Call Centre on 0344 561 1234.
For Ireland, please call our Ireland Call Center on 1 890 818 575.
Monitor
Front Base
Front screw

9
HDMI VGA DC
Product Overview
Main Unit
Front View
Rear View
2. Joystick Function Button
3. HDMI socket
4. VGA socket
5. DC socket
1. Power LED
• Illuminates when
the monitor is in
On mode.
• Light will go o
when the monitor
is in O mode.
2
3 4 5
1

10
Connection
1. Insert the desired cable into the matching connector on your computer.
HDMI VGA DC
HDMI VGA DC
HDMI Cable
(included)
HDMI Socket
2. Connect the power cord from the monitor DC power supply to a mains socket.
VGA Cable
(not included)
VGA Socket
3. Press the button to turn on the monitor. The LED light at the front of monitor will light
up. If there’s no signal received after few seconds, the monitor will switch to O mode.
If you are using an Apple® computer, an
Apple® adapter is required. The adapter can
be purchased at an Apple® store.
Connect the input signal cable and tighten it
by turning the screws clockwise. To prevent
disconnection secure the cable rmly, do
not over tighten.

11
Adjusting the Angle
1. Place the monitor in an upright position, mounted on the
stand base.
2. Adjust the angle of the screen. The angle of the screen can
be adjusted forwards or backwards from -5° to 15° for a
comfortable viewing experience.
–5° 15°
Front
side
Rear
side
• When you adjust the angle, do not hold the bottom of the monitor set frame as shown, it may injure your
ngers.
• Be careful do not touch or press the screen area when adjusting the angle of the monitor.

12
Basic Operating
Joystick Function Button
The button at the rear of monitor is like a joystick. You can simply operate the monitor
functions by pressing or moving the button.
Left Right
Up
Down
Button Description
Press to switch the monitor on or o.
Move to right • Display the OSD main menu. Move again to enter
a selection in the OSD.
Move to left • Return to the upper menu or exit the OSD menu.
• Executed the “Image Auto Adjust” function
automatically if not in OSD menu. (VGA Signal)
Move to up • Adjust the value in option or select among the
options.
• Fast button of ECO setting if not in OSD menu:
STANDARD / TEXT / GAME / MOVIE / FPS / RTS
Move to down • Adjust the value in option or select among the
options.
• Fast button of game setting if not in OSD menu.
Auto Adjust Image (VGA Signal)
This function provides the user with optimal display settings.
• When the user connects the monitor for the rst time, this function automatically adjusts
the display to optimal settings for individual input signals.
• When you encounter problems such as blurry screen, blurred letters, screen icker or
tilted screen while using the device or after changing screen resolution, move the joystick
function button to right (when you are facing the front of monitor) to improve resolution.
(rear of monitor)

13
• Always disconnect the monitor from the mains socket when not in use for a long period of time.
• The button at the rear of the monitor is only used for switching the monitor into standby, it does not
disconnect the monitor from the mains power. To completely disconnect the mains power, please remove
the mains plug from the mains socket.
Eco Friendly Function
The unit features an ECO-Power mode. It will automatically switch the monitor into o mode if
the monitor does not receive an input signal for serveral seconds and the LED light will switch
o  .
The monitor will switch on again after receiving HDMI or VGA signal automatically after few
seconds. If the monitor still haven’t switch on, press the button at the rear of the monitor or
check the connection between monitor and the input devices.
Customizing Settings
1. Move joystick function button to left (when you are facing the front of monitor) to display
the OSD main menu.
2. Move the buttons left / right or up / down to navigate the OSD menus and sub menu.
Move up and down to adjust the options setting to your preference. Finally move to left to
conrm the setting.
3. If you want to exit the menus, move the button left to return to the upper menu. Or move
and press the button left to leaving the main menu.
Each option is described below.
Menu Settings Description
BRIGHTNESS
BRIGHTNESS Increases or decreases the amount of white in
the picture.
CONTRAST Adjusts the dierence between light and dark
levels in the picture.
ECO Select among picture mode: STANDARD /
TEXT / GAME / MOVIE / FPS (First-person
shotter game) / RTS (Real-time strategy
game).
DCR Select ON or OFF to enable or disable a DCR
(Dynamic Contrast Ratio).
Dynamic Contrast Ratio also called contrast
ratio. With a wider range between black and
white. A monitor is capable of deeper, richer
colours with more visible details in shadows
and highlight. When DCR turns ON, you will
get a better contrast.
When DCR is set to ON, setting of brightness,
contrast, hue and saturation will disable.

14
HUE Adjusts the tone of the screen colors.
SATURATION Adjusts the saturation of the screen colors.
The lower the value, the less saturated
and brighter the colors become.
IMAGE
H. POSITION Used to adjust the horizontal position of the
screen. (VGA signals only)
V. POSITION Used to adjust the vertical position of the
screen. (VGA signals only)
CLOCK To obtain the correct width of the input signal
by adjusting the frequency. Used to minimize
the vertical bars that appear because of an
incorrect width. (VGA signals only)
PHASE Used to optimize screen performance by
adjusting the phase. (VGA signals only)
ASPECT Allows you to watch the screen in various
picture formats: WIDE / 4:3 / AUTO.
COLOUR TEMP.
COLOUR TEMP. Select among colour temperature: Cool /
Warm / User.
Adjusts the colour components
independently to achieve a warm or cool
colour. (for User mode)
RED Adjust red color temperature.
GREEN Adjust green color temperature.
BLUE Adjust blue color temperature.
OSD SETTING
LANGUAGE Allows you to select your desired on screen
menu language. The default is English.
OSD H. POS. Adjusts OSD horizontal position.
OSD V. POS. Adjusts OSD vertical position.
OSD TIMER Adjusts OSD display time.
TRANSPARENCY Adjusts OSD transparency.
RESET
IMAGE AUTO
ADJUST
Auto adjusts the horizontal / vertical
position, focus and clock of the image. (VGA
signals only)
COLOR AUTO
ADJUST
Adjusts white balance. (VGA signals only)
RESET Restore to factory setting.
MISC
SIGNAL SOURCE Select the input source: VGA / HDMI.
EYE SAVER Eye Saver is optimized your viewing comfort
by smartly reducing blue light emissions.

15
Maintenance
Cleaning the Unit
Hints and Tips
The following table contains various hints and tips to get the best performance from your
monitor. If you require additional assistance:
• For UK, please call our UK Call Centre on 0344 561 1234.
• For Ireland, please call our Ireland Call Center on 1 890 818 575.
Problem Solution
No image on screen • Check if the power button has been switched on.
• Verify the brightness and contrast of the monitor is within the
normal setting.
• Check if the power indicator is turns on. If so, this indicates
that the monitor is not recieving the input signal.
• If the signal indicator is a notebook or laptop, make sure that
the signal has been switched to screen mode.
• Make sure that the computer is turned on and is not sleeping.
• Make sure that the correct input is selected.
Out of Focus • Check if the image signal cable is inserted properly.
Flashing Screen • The power is insucient to connect the monitor or is too
weak.
• To avoid a magnetic eld around the monitor, move devices
like speakers, ourescent lights, AC transformers, table fans,
etc. farther away.
Ensure the unit is fully unplugged from the mains socket before cleaning.
• Use a soft dry cloth to wipe away the dust
from the screen and surfaces.
• If the surfaces are extremely dirty, clean the
monitor with a cloth which has been dipped
in a slightly soapy water. Wring the cloth
until it is almost dry, then use it to wipe the
monitor.
• Ensure there is no excess water on the screen.
Allow any water or dampness to evaporate
before switching the monitor on.
• Never use alcohol, benzine, paint-thinner, cleaning uid or other chemicals.
• Do not use compressed air to remove dust.

16
Wrong or Unusual Color • If red, green, blue, or any of the color disappears, check to see
if the signal cord is connected properly. If the plub is loose it
might cause a bad connection.
• Try connecting another PC for comparison.
Horizontal Screen
Rolling
• Retighten the signal cable.

17
Product Fiche and Specifications
Brand JVC
Model LT-24CM79W
Energy Eciency Class A
Screen Size (measured diagonally) Approx. 60 cm (23.8 inch)
Power Consumption 24.0 W
Average Annual Energy
Consumption *
(Please refer to *1 under this table)
36 kWh
Standby Power Consumption 0.40 W
Display Resolution 1920 pixels (horizontal) x 1080 pixels (vertical)
Panel System 24 inch IPS LED Backlit LCD Panel
Brightness 220 cd/m2
Contrast Ratio 1000:1
Peak Luminance (On-Mode) 73%
Power Source 100-240V~50/60Hz
O Power Consumption 0.30 W
Operating Temperature 0°C – 40°C
Operating Humidity 20% – 80%
Mercury Content (mg) <2.0 mg
Presence of Lead *
(Please refer to *2 under this table) 3
Reference Period 2010/1062 – 2020
Dimension (W x D x H) With Stand: 541.9 x 151.8 x 399.2 mm
Without Stand: 541.9 x 29.0 x 321.2 mm
Weight (Net) With Stand: 4.6 kg
Without Stand: 2.53 kg
Tilt Range -5°~15°
Power Adapter (Use only adapter listed below)
Power Adapter Manufacturer DONGGUAN CITY GANGQI ELECTRONIC CO., LTD.
Power Adapter Model GQ24-120250-AB
Input 100-240V~ 50/60HZ 1.0A
Output 12V 2.5A
Inputs
HDMI 1
VGA 1
Features and specications are subject to change without prior notice.
*1 Energy consumption per year based on the power consumption of the monitor operating
4 hours per day for 365 days. The actual energy consumption will depend on how the
monitor is used.
*2 This monitor contains lead in certain parts or components where no technology
alternatives exist in accordance with existing exemption clauses under the RoHS Directive.

18
A
Wa
kWh/annum
cm inch
2010/1062 - 2020
LT-24CM79W
36
24
60 23.8

19
Useful Information and Licences
The adopted trademarks HDMI and HDMI High-Denition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States
and other countries.
All trademarks are the property of their respective owners and all rights are acknowledged.
Visit Partmaster.co.uk today for the easiest way to buy electrical
spares and accessories. With over 1 million spares and accessories
available we can deliver direct to your door the very next day.
Visit www.partmaster.co.uk or call 0344 800 3456 (UK customers only).
Calls charged at National Rate.
The symbol on the product or its packaging indicates that this product must not
be disposed of with your other household waste. Instead, it is your responsibility to
dispose of your waste equipment by handing it over to a designated collection point
for the recycling of waste electrical and electronic equipment. The separate collection
and recycling of your waste equipment at the time of disposal will help conserve
natural resources and ensure that it is recycled in a manner that protects human health
and the environment.
For more information about where you can drop o your waste for recycling, please
contact your local authority, or where you purchased your product.
All the support you need.
Currys.co.uk
Whether it’s a tech emergency or you need plain good advice,
we’re always on hand to help, call (UK) 0344 5611234 or
(Ireland) 1 890 818 575.

The product is distributed and warranted exclusive by DSG Retail Ltd.
“JVC” is the trademark of JVCKENWOOD Corporation, used by DSG Retail Ltd. under license.
(IB-LT-24CM79W-191025V2)
Dear Customer,
This apparatus is in conformance with the valid European directives compatibility
and electrical safety.
DSG Retail Ltd. (co. no. 504877)
1 Portal Way, London, W3 6RS, UK
EU Representative
DSG Retail Ireland Ltd (259460)
3rd Floor Oce Suite
Omni Park SC, Santry, Dublin 9, Republic of Ireland
For Help and Support Call
UK: 0344 561 1234
Ireland: 1890 818 575
Hereby, DSG Retail Ltd., declares that this monitor
(LT-24CM79W) is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available
at the following internet address:
https://www.teamknowhow.com/
Click on SEARCH and enter the model number.