JWA ALDERNAY 68401 User manual

1
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
ASSEMBLY INSTRUCTION
ALDERNAY
68401
Bar Cart

Allow 15 min For 1 person
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to the
point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by a competent adult(s) ONLY
8. During assembly, children should be kept away from the product due to possible
risk to injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instructions for future reference.
2

3
PARTS LIST
1 Bar cart

•Fold out the bar cart ①, as shown. Make sure to extend
fully and the trays are level.
4
STEP 1:
ASSEMBLY IS COMPLETE

5
PRODUCT CARE:
To protect your furniture, we suggest the following:
•Avoid placing your furniture in direct sunlight.
•Do not place furniture directly under windows.
•Do not place sharp objects (knife, fork, etc.) directly onto your
furniture as sharp objects may scrape and damage the finish.
•Do not place hot objects directly onto the surface of your furniture.
•Clean up spills quickly. Water left over a prolonged period of time
may cause damage.Alcohol, perfume, nail polishes, aftershave and
some medication may cause severe finish damage if not cleaned
immediately.
•Use a clean, soft, dry, lint free absorbent cloth to clean your
furniture. Do not use any detergent as they may contain chemicals
that may react and damage the finish.
NOTE: If the above care advise is not adhered to your product
warranty may become void