JWA Oldham 69486 User manual

1
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
ASSEMBLY INSTRUCTION
OLDHAM
ITEM CODE 69486
WIDE UNIT

PRE-ASSEMBLY PREPARATION
Before you start:
1.Choose aclean, level, spacious assembly area.Avoid hard surfaces that may damage the
product
2.Take care when lifting.Product should be assembled as near as possible to the point of
use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning assembly.
5.Keep all hardware parts and packaging out of reach of small children.
6.Do not over tighten the screws and bolts as this may damage the threads
2
Allow 45 min For 2person Additional tools required

PARTS LIST
1Bottom panel
2Middle Layer panel
3Back panel-bottom
4Top panel
5Back panel-top
6Upper Layer panel
I1 Metal panel
I2 Conneciton pipe
I3 Coat hanger
3

Load fitting H into the bottom of metal frame I1.
STEP 1:
Assemble panel 2 and 3, Panel 4 and 5 respectively with
fitting C.
STEP 2:
4

Assemnle metal I1 with connection pipe I2 with fitting B, then
assemle the panel 1 and 6, component 2+3 and 4+5 to the
metal frame with fitting C.
STEP 3:
Install I3 to the metal frame with fitting A.
STEP 4:
5

Install the fitting F to the panel 4 with fitting E, and Punch
holes in the wall at the appropriate position and insert the glue
G, lock screw D through F to the wall.
STEP 5:
6
ASSEMBLY IS COMPLETE

To protect your furniture, we suggest the following:
• Avoid placing your furniture in direct sunlight.
• Do not place furniture directly under windows.
• Do not place sharp materials (knife, fork, etc.) directly onto
your furniture as sharp material may scrape and damage the
finish.
• Do not place material with high temperature directly onto the
surface of your furniture.
• Clean up spills quickly. Water left over a prolonged period of
time may cause damage. Alcohol, perfume, nail polishes,
aftershave and some medication may cause severe finish
damage if not cleaned immediately.
• Use a clean, soft, dry, lint free absorbent cloth to clean your
furniture. Do not use any detergent as they may contain
ingredients that may react and damage the finish.
NOTE: If the above care advise is not adhered to your product
warranty may become void
7