JWA EDINA 69388 User manual

1
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
ASSEMBLY INSTRUCTION
EDINA
ITEM CODE 69388
Dressing Table and Stool

PRE-ASSEMBLY PREPARATION
Before you start:
1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the
product
2.Take care when lifting. Product should be assembled as near as possible to the point of
use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning assembly.
5.Keep all hardware parts and packaging out of reach of small children.
6.Do not over tighten the screws and bolts as this may damage the threads
2
Allow 30 min For 2 person Additional tools required

3
PARTS LIST

4
PARTS LIST

5
STEP 1:
STEP 2: Gx8
Ex2
Fx8

STEP 3:
6
STEP 4:
Kx2
Lx6Hx2

STEP 5:
7
STEP 6:
Bx2
Ix2Dx2
Ax2
Dx1Cx2
Jx1Ix1
Lx4

STEP 7:
8
STEP 8:
Lx2 Mx2
Gx8Fx8
Nx1

STEP 9:
9
Nx1
Cx2
STEP 10: Nx1

STEP 11:
10

11
ASSEMBLY IS COMPLETE

12
To protect your furniture, we suggest the following:
•Avoid placing your furniture in direct sunlight.
•Do not place furniture directly under windows.
•Do not place sharp materials (knife, fork, etc.) directly onto
your furniture as sharp material may scrape and damage the
finish.
•Do not place material with high temperature directly onto the
surface of your furniture.
•Clean up spills quickly. Water left over a prolonged period of
time may cause damage. Alcohol, perfume, nail polishes,
aftershave and some medication may cause severe finish
damage if not cleaned immediately.
•Use a clean, soft, dry, lint free absorbent cloth to clean your
furniture. Do not use any detergent as they may contain
ingredients that may react and damage the finish.
NOTE: If the above care advise is not adhered to your product
warranty may become void