JWA Smithton 70345 User manual

Imported by JWA Furniture Pty Ltd, Qld, BrisbaneAustralia.
For any assistance with assembly or for missing parts please refer to your receipt
ASSEMBLY INSTRUCTION
Smithton
Laundry Hamper
ITEM CODE 70345 / 70344
670MM
1

PRE-ASSEMBLY PREPARATION
Before you start:
1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the
product
2.Take care when lifting . Product should be assembled as near as possible to the point of
use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning assembly.
5.Keep all hardware parts and packaging out of reach of small children.
6.Do not over tighten the screws and bolts as this may damage the threads
Allow 30 min For 1 person Additional tools required
2

PARTS LIST
C1
3
C2 B
C1
C2
A
A

PARTS LIST
NO.
ITEM QTY
D
8PCS
NO.
ITEM
QTY
A
SIDE PANEL 2 PCS
B
FABRIC BAG 1PC
C1
SUPPORT BAR 2
PCS
C2
SUPPORT BAR 2
PCS
4

STEP1:
C2
AC2
D
D
DX2
D
A
STEP 2:
C1
DDX2
C2
C2
C1
C2 needs to go on the
inside arm of A
C1 needs to go on the
outside arm of A
5

STEP3:
STEP4:
B
C1
C1
C2
D
D
D
A
DDX4
6

STEP5:
ASSEMBLY IS COMPLETE
7

Toprotect your furniture, we suggest the following:
•Avoid placing your furniture in direct sunlight.
•Do not place furniture directly under windows.
•Do not place sharp materials (knife, fork, etc.) directly onto
your furniture as sharp material may scrape and damage the
finish.
•Do not place material with high temperature directly onto the
surface of your furniture.
•Clean up spills quickly. Water left over a prolonged period of
time may cause damage. Alcohol, perfume, nail polishes,
aftershave and some medication may cause severe finish
damage if not cleaned immediately.
•Use a clean, soft, dry, lint free absorbent cloth to clean your
furniture. Do not use any detergent as they may contain
ingredients that may react and damage the finish.
NOTE: If the above care advise is not adhered to your product
warranty may become void
8