JWA KNAPP 73681 User manual

ASSEMBLY INSTRUCTION
KNAPP Entertainment Unit
ITEM COD E 73681
Imported by JWA Furniture Pty Ltd, Brisbane Qld Australia.
For any assistance with assembly or for missing parts please refer to your receipt
2021-09-15 1 item code:73681
mm
mm
mm

Allow 30 min For 2 person
2021-09-15 2item code:73681
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when liing. Product should be assembled as near as possible to the
point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instrucons carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over ghten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by a competent adult(s) ONLY
8. During assembly, children should be kept away from the product due to possible
risk to injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instrucons for future reference.
Addional tools required

2021-09-15 3item code:73681

PARTS LIST
1
2
3
4
5
6
TOP PANEL
BOTTOM PANEL
SIDE PANEL
MIDDLE PANEL
7
8
9
10
11
12
MIDDLE PANEL
LAMINATES
BACKPLANE
DOOR PANEL
DRAWER SIDE PANEL
2021-09-15 4 item code:73681
13
14
15
16
17
18
FOOT TUBE
DRAWER REINFORCEMENT
BACK PANEL OF DRAWER
DRAWER BOTTOM
CONNECTING PIPE
SIDE PANEL
BACKPLANE
FRONT PANEL OF DRAWER
DRAWER SIDE PANEL
46

2021-09-15 5 item code:73681
Fix panel (5)(6) to panel (7) with cam lock (B) and dowel (D).
Fix cam pin(A) to panel(1)(5)(6)
Fix runner part(M) to panel(5)(6) with screw (E)

2021-09-15 6item code:73681
Fix panel (3)(4)(5)(6) to panel (1) with cam lock (B) and dowel (D).
Insert panel (8)( 9) into grooves between panel
(3)(4)(5)(6).
Then glue (J) to each camlock hole.

2021-09-15 7 item code:73681
Attach panel (2) to panel (3)(4)(5)(6) with screw (C) and dowel(D)
Turn screw (C) clockwise to tighten using allen key
(K), as shown.
Attach metal leg (17)x2 to support tube (18) with
screw (G).Using allen key (K) to fix 80% as shown.
80%

2021-09-15 8item code:73681
Attach metal leg (18) to bottom panel (2) with
screw (H).Using allen key (K) to fix (H) to 100% and (G) to 100%
as shown.
Insert the back panel hook (F) into the back and
using screw (E) to fix, as shown.

2021-09-15 9item code:73681
Fix cam pin(A)to drawer face(11)
Connect (16)(12)(13)(14) with screw (I) as shown
Fix drawer with cam lock(B)
Fix runner(N) to drawer side with (E)
Insert the drawer by the correct way as shown

2021-09-15 10 item code:73681
Adjust hinge(L) on the door as shown.
Fix hinge (L) on panel (10) with screw(E) as shown.