Kärcher CV 66/2 User manual

www.kaercher.com/register-and-win
CV 66/2
59650090 09/13
Deutsch 3
English 9
Français 15
Italiano 21
Nederlands 27
Español 33
Português 39
Dansk 45
Norsk 51
Svenska 57
Suomi 63
Ελληνικά 69
Türkçe 75
Русский 81
Magyar 88
Čeština 94
Slovenščina 100
Polski 106
Româneşte 112
Slovenčina 118
Hrvatski 124
Srpski 130
Български 136
Eesti 142
Latviešu 148
Lietuviškai 154
Українська 160
中文 166
All manuals and user guides at all-guides.com
all-guides.com

– 1
Please read and comply with
these original instructions prior
totheinitialoperationofyourapplianceand
store them for later use or subsequent own-
ers.
–Before first start-up it is definitely nec-
essaryto readthe safetyindications Nr.
5.956-249!
–The non-compliance of the operating
and safety instructions may lead to
damages of the appliance and to dan-
gers for the operator and other persons.
–Incaseof transport damageinform ven-
dor immediately
Notes about the ingredients (REACH)
You will find current information about the
ingredients at:
www.kaercher.com/REACH
Danger
Immediate danger that can cause severe
injury or even death.
몇Warning
Possible hazardous situation that could
lead to severe injury or even death.
Caution
Possible hazardous situation that could
lead to mild injury to persons or damage to
property.
–The appliance is only to be used for dry
cleaning of floors.
–Thisapplianceis suited forthe commer-
cial use, e.g. in hotels, schools, hospi-
tals,factories,shops,offices,andrental
companies.
Contents
Environmental protection . . EN . . .1
Symbols in the operating in-
structions . . . . . . . . . . . . . . EN . . .1
Proper use . . . . . . . . . . . . . EN . . .1
Device elements. . . . . . . . . EN . . .2
Start up. . . . . . . . . . . . . . . . EN . . .2
Operation . . . . . . . . . . . . . . EN . . .2
Transport . . . . . . . . . . . . . . EN . . .3
Storage. . . . . . . . . . . . . . . . EN . . .3
Maintenance and care . . . . EN . . .3
Troubleshooting . . . . . . . . . EN . . .4
Warranty. . . . . . . . . . . . . . . EN . . .5
Accessories and Spare Parts EN . . .5
EC Declaration of Conformity EN . . .5
Technical specifications . . . EN . . .6
Environmental protection
The packaging material can be
recycled. Please do not throw
the packaging material into
householdwaste;pleasesendit
for recycling.
Oldappliancescontainvaluable
materials that can be recycled;
these should be sent for recy-
cling. Batteries, oil, and similar
substances must not enter the
environment. Please dispose of
your old appliances using ap-
propriate collection systems.
Symbols in the operating in-
structions
Proper use
9EN
All manuals and user guides at all-guides.com

– 2
1 Pushing handle, adjustable
2 Cable clamp
3 Cable holder, rotating
4 Storage compartment
5 Lock of pushing handle
6 Lid of filter chamber
7 Suction hose connection (for optional
suction set)
8 Fuse for brush drive
9 Fuse for suction turbine
10 Display 'Filter bag is full'
11 Power switch
A Appliance switch in OFF position
B Appliance switch in ON position
–Theoperatingelementsforthecleaning
process are yellow.
–The controls for the maintenance and
service are light gray.
Open lid of filter chamber.
Slide the filter bag into the basket with
the opening facing the connecting hub.
Push the opening of the filter bag over
the connection nozzle.
Close the lid of filter chamber.
Wrap the mains cable of the appliance
around the three cable holders.
Remove the entire mains cable by turn-
ing the rotating cable holder.
Swivel the pushing handle lock to the
outside, set the desired pushing handle
height and close the lock.
Device elements
Colour coding
Start up
Inserting a filter bag
Operation
Storing and removing the cable
Adjust the pushing handle
10 EN
All manuals and user guides at all-guides.com

– 3
Large waste such as cardboard cups,
cardboard plates, strings and similar
objects must be picked up prior to vac-
uuming.
Insert the mains plug into the socket.
Set the appliance switch to "ON".
Ride along the surface to be cleaned
with a suitable, even speed.
Heavysoilingmust be workedon sever-
al times or slower.
Caution
Risk of damage to the floor covering. Do
not operate the appliance on the spot.
Due to the one-sided arrangement of
the brushes, the right side of the appli-
ance can clean all the way to the edge.
If the display for a full filter bag is illumi-
nated, switch the appliance off and re-
place the filter bag.
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.
Danger
Firstpull outthe plugfrom themains before
carrying out any tasks on the machine.
If needed, shake the contents of the fil-
ter bag downward.
Check the mains connection cable for
damages. Replace the defective mains
cable.
Clean below the appliance.
Remove fibres, hair and strings from
the brush rollers.
Check and clean seals, replace dam-
aged seals.
Clean brushes and check for wear and
tear.
Thebrushesare consideredworn,ifthe
bristles have the same length as the
yellow indicator bristles.
Clean the motor protection filter on the
bottom of the filter chamber and check
for damage.
Remove the wheels, clean the axles
and apply a thin coat of silicone grease.
Open lid of filter chamber.
Pull the filter bag off the connection hub
and remove them from the appliance.
Insert new filter bag (see "Replacing fil-
ter bag").
Vacuuming
Transport
Storage
Maintenance and care
Maintenance intervals
Daily
Weekly
Monthly
Half-yearly
Replacing the filter bag
11EN
All manuals and user guides at all-guides.com

– 4
Disconnect the main plug from the
socket.
Tilt the appliance backward and store it
on the pushing handle.
1 Locking plate
2 Bearing block
3 Brush roller
4 Driver pin
Bend the locking plate outward and pull
the bearing block out from the bottom.
Pullthe brushrolleroff thedriver andre-
move.
Pull the bearing block off the brush roll-
er.
Note
The front and rear brush rollers are differ-
ent. In order to achieve the best cleaning
effect, the brushes must be installed cor-
rectly.Thecorrectassemblyisindicatedon
the bottom of the appliance:
The indicated part numbers (PN) are listed
on the driver side of the brush rollers.
Insert the bearing block onto the new
brush roller.
Insert the brush roller onto the driver
and turn until the driver pin locks into
the brush.
Insert the bearing block into the appli-
ance and push in far enough for the
locking plate to lock into place.
Repeat process on the second brush
roller.
Note
Always replace brushes in pairs.
Danger
Firstpull outthe plugfrom themains before
carrying out any tasks on the machine.
Plug in the main plug.
Check facility fuse.
Reset the brush drive fuse on the con-
trol panel.
Gear defective, contact Customer Ser-
vice.
Reset the suction turbine fuse on the
control panel.
Replacing the brush rollers
Troubleshooting
Appliance is not working
Brushes do not turn
Suction turbines do not run
12 EN
All manuals and user guides at all-guides.com