– 6
When unpacking the product, make sure that no acces-
sories are missing and that none of the package con-
tents have been damaged. If you detect any transport
damages please contact your dealer.
Illustration
To connect the suction hose during vacuuming.
Illustration
Position I: Suction or blowing
Position 0: Appliance is switched off
To carry the appliance or to remove the appliance
head after unlocking.
Illustration
To store the mains cable.
Illustration
Connect the suction hose to the blower connection,
this will activate the blower function.
Illustration
Pull out to open, push in to lock.
Illustration
To rest the floor nozzle during work interruptions.
Illustration
The accessories compartment allows the storage
of suction pipes and suction nozzles on the appli-
ance.
Illustration
The steering rollers are located in the waste con-
tainer when the appliance is delivered. These must
be attached prior to starting up the appliance.
Note: Do not use a filter bag for wet vacuuming!
Illustration
Recommendation: To vacuum fine dust, use the
filter bag.
Illustration
The cartridge filter must always be installed - with
wet and dry vacuuming.
Note: Let the wet cartridge filter dry prior to using it for
dry vacuuming.
Illustration
Push the suction hose into the connection on the
appliance, it snaps in place.
In order to disconnect it, push down with your
thumb and pull the suction hose out.
Note: Accessories, such as suction brushes (optional)
can be directly attached to the connecting piece and
thus connected to the suction hose.
For convenient working even in tight spaces.
The removable handle can be attached between the ac-
cessories and the suction hose if necessary.
See position 13.
Recommendation: In order to vacuum the floor, attach
the handle to the suction hose.
Illustration
Connect the handle with the suction hose until it
snaps in place.
Illustration
To remove the handle from the suction hose, press
the notch using your thumb and pull off the handle.
Note: Due to removing the handle, accessories can be
directly attached to the suction hose.
Recommendation: In order to vacuum the floor, attach
the handle to the suction hose.
See position 12.
Illustration
Put both suction tubes together and connect them
with the handle.
For edges, joints, heaters and hard to reach locations.
Illustration
When vacuuming dry dirt off the floor, clip an insert
with two brush strips into the floor nozzle.
When vacuuming water off the floor, clip an insert
with two rubber lips into the floor nozzle.
For cleaning upholstered furniture, mattresses,
laced curtains, etc.
For gentle cleaning of sensitive surfaces such as
car dashboard or center console.
Description of the Appliance
Suction hose connection
ON/OFF switch for appliance
Carrying handle
Cable hook
Blowing connection
Container closure
Parking position
Accessory mount
Steering roller
Filter bag
Cartridge filter
Suction hose with connecting piece
Removable handle
Suction tubes 2 x 0.5 m
Crevice nozzle
Floor nozzle
(with inserts)
Upholstery nozzle
Suction brush with soft bristles, black