K9Safety K9Caller User manual

Operators Manual
K9Caller™
Phone: 877-K9-SAFE-T
Phone: [phone]
Located in Glendale, AZ
www.K9Safety.com
K9Caller™Version 1
Copyright K9Safety 2009
Rev 3

Page 2
Table of Contents
Page 1 Cover
Page 2 Table of Contents
Page 3 Overview
Page 4 & 5 Selecting Features and Connections
Page 6 User Controls
Page 7 Keychain Remote
Page 8 Remote Button 5 Menu
Page 9 Remote Button 5 Menu Continued
Page 10 Remote Settings
Page 11 K9 Functions Described
Page 12 K9 Functions Described Continued
Page 13 Alarm Functions Described
Page 15 Branch Programming Options
Page 16 Blank
Page 17 Warranty Info
Important
Please remember to apply the yellow warning sticker to an area inside the vehicle
that would be easily noticed by a vehicle technician. The sticker is taped to the front
of this manual. If you do not have a sticker, please contact support for a replacement.
Main Control Unit, 2-Way Antenna, LCD Remote (2-Way), LCD Leather Case, AAA
Battery, 1-Way Remote with Batter, Compact Siren, Combo Status & On/Off Button, Hood
Switch, Magnetic Park Safety Contact Set, Ignition Harness, Door Lock Harness, Main
Harness, Auxiliary Harness, Temperature Probe, Starter Disable/AntiGrind Relay, Installa-
tion & Operators Instructions.
Standard Package Contents

The K9Caller is the most advanced vehicle mounted canine safety system available.
You should take time to review the information in this manual as it provides details regard-
ing available features and operational characteristics. There are many features which can be
configured simply by changing the feature setting selection. Review the table on the follow-
ing page and select which functions are best suited to your daily operation.
Once selected, inform your installation technician so that the functions can be programmed
for you. We can also store the settings for emergency service agencies and pre-configure
them before shipping future shipments.
The system is divided into three distinct systems in terms of operation which are independ-
ently controlled from each other. First and foremost, the system is a K9Safety system which
can be turned on/off and activated separately from the secondary functions of a vehicle secu-
rity system and the functions of a remote door pop. In some cases the system may be in-
stalled in a way which does not allow the operation of all the listed functions.
The K9Safety functions can include, Hot temperature alert via honking horn or remote noti-
fication, remote temperature notification, automatic engine run, temperature controlled en-
gine start, window and fan control to name some.
The security system features can include, remote keyless entry, entry detection for doors,
hood, trunk, and other sensors, remote trunk pop or other auxiliary functions, engine disable,
and remote alarm indication.
The door pop feature is designed to deploy a K9 typically from a passenger rear door while
the vehicle is not moving to aid a handler in suspect apprehension or quick response. The
door pop feature is typically ready when the K9Safety system is ready.
The system features vary based on feature programming selection and components installed.
Program Example, the system can be programmed to either start or not start the vehicle
based on temperature. (See Programming Branch 7 in the installers guide)
Installation Example, the system can roll down windows to allow outside air in the vehicle in
case of hot temperature but a window module must be installed to allow this operation. (See
Options)
Valet Mode:
The user should always put the system in Valet mode whenever the vehicle is taken in
to be serviced. See page 4 for details.
Overview
Page 3

Page 4
Selecting Features and Connections.
In the following section we will identify the connections and programming for the
most common system configurations that are being used by our K9Caller custom-
ers.
The two most common uses of the K9Caller are found in but not restricted to
Police Patrol K9 Vehicle (Professional Handler) & Privately Owned Vehicle
(Dog Enthusiast) .
The K9Caller can be configured to operated in a number of fashions depending on
the user or agencies needs. Some of the system’s features can be selected from the
remote at any time while others are selected through the programmable branches.
Your preferences may also require the system to have some of the connections
wired to the vehicle in a particular fashion or with optional modules to achieve the
desired results though most of the connections are standard from vehicle to vehi-
cle. Some of the features that would require specific wiring or optional modules
include connecting any of the three aux channel outputs, Aux1, Aux2 and Trunk/
Door pop, or window modules, fans, and cellular messenger. Optional hardware
is typically necessary to achieve door pop functionality (door pop kit upgrade)
which will receive a command from the system to pop open the door.
It is helpful to review the options available in the programmable branches to make
the best determination as to the features that are desired and the wires or options
that will be connected on your vehicle.
Some of the features should only be changed by a qualified technician.
These features are denoted with Tech.
Other feature can be changed by the user and they are denoted with User.
See Branch Programming for details

Selecting Features and Connections Continued.
Police Patrol K9 - Professional Handler
This is the most common configuration for police agencies across the country. By
default the system comes programmed to operate in this fashion.
Features
The K9 systems will automatically turn on and monitor for temperature whenever
the vehicle arrives at a destination. If the temperature inside the vehicle reaches the
start temperature, the engine will start allowing the AC to operate. If the vehicle
reaches the alert temperature, the vehicles horn will honk and an alert message will
be sent to the LCD remote. If the optional window module is installed, the win-
dows will roll down during hot temperature alert. If the optional window fan is in-
stalled, the windows fan will turn on during hot temperature alert. The remote can
also be used to manually turn on/off the car alarm and lock and unlock the doors. If
the door pop kit is installed the LCD or 1way remote can be used to pop the door.
Aux1 can be wired with an optional relay to pop the trunk open.
Another feature is the starter disable/starter anti-grind which requires the connec-
tion of the included relay and will disable the vehicle from being started when the
security alarm is active and will also prevent the starter from grinding if the vehicle
is “auto-started”and the user turns the ignition key to the start position.
Note, police K9 vehicles normally have fixed inserts and window screens that
would prevent the dog from jumping out of the window and would also keep the
vehicle secure from intrusion.
Privately Owned Vehicle -Dog Enthusiast)
This is the most common configuration for users of privately owned vehicles that
have a canine companion travel with them. The default settings are typically
changed in branch programming to have manual K9 system activation selected.
Features
Consumer installations can be slightly different in nature as most consumers do not
want windows to roll down automatically as this could put their canine at risk of
injury or their vehicle at risk of unlawful entry. This simply means that an optional
window drop module would not be installed on the vehicle. The more likely option
would be the bidirectional window controller that can be connected to the aux out-
puts to remotely roll up and down the windows. Many consumer vehicles are
equipped with additional features such as automatic door sliders and rear hatch or
trunk pops that can also be connected to one of the three aux outputs.
Page 5

The antenna shows status of the alarm functions
and is used to enter programming features, valet
override and emergency disarm.
If your remote is lost or not functioning and your
alarm is armed, you can enter the vehicle, the
alarm will sound, and the auto engine run will shut
down if already running, turn on the ignition key,
and hold the antenna button for approx 10 sec-
onds.
There are three user controls that operate the various features of the system.
Some features can be control by more than one devices. The user control devices are the
control switch, the remote control (2-way & 1-way) and the antenna.
The control switch allows the user to activate and deactivate the
k9system, trigger the alert delay, and display k9system status.
The 2-way remote allows the user to activate and
deactivate the k9system, receive alert signals check
temperature, arm/disarm the alarm system, set tem-
perature thresholds, and remote start the vehicle to
name a few. Please see the page 5 for more detail.
User Controls Described
Page 6
Two Way Antenna Button and LED
Status LED
Activation &
Alert Delay Switch
Alarm Status
LED
Program
Button
Valet mode should be used whenever the vehicle is sent for maintenance or repair as it
will prevent the auto start, door pop, and alarm from functioning. After service, remember
to take the system out of Valet Mode. To put the system in or out of Valet, Turn on the
ignition and press and hold the antenna button for 5 seconds. The control switch LED will
flash while in valet. Repeat the process to take the system out of Valet mode.
System Valet Mode:

The K9 features can be activated and deactivated by pressing and holding the control switch
button for 2 seconds while the ignition is on. This will toggle activation/deactivation each
time. While activated the K9 features such as hot temperature alert, hot temperature start, and
door pop are ready to be triggered and the blue L.E.D. on the control switch will light steady.
While deactivated the K9 features will be turned off and the L.E.D. will not be lit. The control
switch will also trigger the alert delay if the system has triggered the hot temperature alert
(horn honk, window down, etc) which will delay the alert from triggering for 5-10 minutes
depending on programming.
The Keychain remote is used to receive high temperature alert notification, turn On/Off the
security system tied to all four doors, remote check vehicle cabin temperature, or remotely
auto start the vehicle (Alert receive range is up to 1500ft and keychain transmit range is
up to 1000ft depending on environment).
There are five buttons and several icons on the keychain remote which perform certain func-
tions on the system or indicate system status.
Button #1 is used to turn On the vehicle security system which is connected to all entry doors.
Button #2 is used to turn Off the vehicle security system.
Button #3 is used for door pop or trunk pop.
Button #4 is used to remotely auto start the vehicle.
Button #5 is used to check the last signal including, security armed/disarmed, engine auto
start active, and cabin temperature.
This button can also be used to change the ECU state in/out of valet which will affect the
normal operation of the security system. It will not affect the system’s ability to normally
operate the temperature auto start or temperature alert. Pressing and holding button # 5 will
scroll through the options at approximately 1 per second. To access you must hold button # 5
until the desired parameter is displayed then release button # 5
Note the following features are not accessible in remote lockout mode and no changes
can be made via the remote.
PSV, VAL, Setting the Call Temperature, Setting the Hot Start Temperature
Keychain Remote
Page 7

Pressing and holding button # 5 will scroll through the six available options at approximately
1 per second. To access you must hold button # 5 until the desired parameter is displayed
then release button # 5
It is recommended that you check con before changing any of the parameters using button 5.
This will insure that you are in range and that the system is not “busy”
CON : reports ECU conditions; auto start running/off, security system on/off.
To display system status:
1. Press and hold Button 5 until the display shows CON.
· The transmitter will beep once.
2. Release Button 5.
· The transmitter will beep once.
· The LCD panel will display the current system status.
deg : reports the cabin temperature.
1. Press and hold Button 5 until the display shows DEG
·The transmitter will beep twice.
2. Release Button 5.
· The transmitter will beep four times.
· The LCD panel will display the temperature inside the vehicle
CHP : Turns on/off the siren chirp. This feature has no effect as no siren is installed. The
vehicle horn is used as an audible alert.
1. Press and hold Button 5 until the display shows CHP.
·The transmitter will beep three times.
2. Release Button 5.
· The transmitter will beep once.
· The LCD panel will show a siren if the chirps*/honks are enabled or "off" if the chirps*/
honks are disabled.
SND : Selects between audible sound or vibrate on the Keychain Remote.
Set the transmitter confirmation tones ON or OFF:
1. Press and hold Button 5 until the display shows SND.
· The transmitter will beep four times.
2. Release Button 5.
· The transmitter will beep once.
· The LCD transmitter will beep 5 times and display “on”if the sounds are enabled or vibrate
and display "off" for the Remote to vibrate.
PSU : Selects between the K9 functions activating manually or passively arm after arrival.
1. Press and hold Button 5 until the display shows PSV.
· The transmitter will beep five times.
2. Release Button 5.
· The transmitter will beep once.
· The LCD panel will play a tone and display “on”if enabled or "off" if disabled.
*Note this function is not available when remote lockout is selected.
Remote Button 5 Menu
Page 8

VAL : Selects between K9 function activation/deactivation
When Activated the Keychain Remote will display.
To Activate/Deactivate the K9 functions:
1. Press and hold Button 5 until the display shows VAL.
· The transmitter will beep six times.
2. Release Button 5.
The LCD panel will play a tone if the K9 functions were activated
and the symbol “V" will be displayed.
The transmitter will beep twice and the symbol “V" will turn off indicating that the
K9 functions are deactivated.
*Note this function is not available when remote lockout is selected.
C °: Call (Hot Alert) Temperature Setting
1. Press and hold Button 5 until the display shows C °.
· The transmitter will beep 7 times.
2. Release Button 5.
· The transmitter will beep once.
· The LCD panel will show the Call (Hot Alert) Temperature setting. (Default 95)
The setting can be changed through Feature Programming or via the remote. See
h °: Hot Temperature Start Setting
1. Press and hold Button 5 until the display shows h °.
· The transmitter will beep 8 times.
Repeat steps 2-4 above.
2. Release Button 5.
· The transmitter will beep once.
· The LCD panel will show the Hot Start Temperature setting. (Default 75)
The setting can be changed through Feature Programming or via the remote. See
Keychain Remote Battery Replacement
The Keychain Remote uses a 1.5 volt AAA alkaline battery, which will require replacement
in time. Although the battery may last up to 3 months before it needs replacement it is rec-
ommended to replace the battery every month.
When the battery needs replacing, the system’s operating range will decrease, the LCD dis-
play will show
only one of three bars in the battery icon, or the display and sounds may suddenly stop and
start as the battery voltage drops below minimum. In order to change the battery, first slide
the battery door locking pin to the side. Carefully slide the battery cover downward until it is
free. While replacing the battery make sure that the positive and negative terminals are posi-
tioned correctly, then carefully reassemble the transmitter case.
Remote Button 5 Menu Continued
Page 9

Remote Settings
Page 10
Setting Keychain Remote Time
The LCD display is equipped with a 12-hour clock that in addition to displaying the time,
offers an alarm clock function as well as a remote activation timer.
To set the time:
1. Press and hold Buttons 2 and 3 for three seconds.
· The remote will beep two times and three bars will be shown indicating time set mode is
entered.
2. Press and release Button 2 until the correct hour is displayed. (hold button to scroll).
3. Press and release Button 3 until the desired minute is displayed. (hold button to scroll).
4. When the desired time is displayed, press Button 5 to store.
· The remote will beep 3 times to indicate the time has been set.
Setting Keychain Remote Alarm Clock
The alarm clock function can be set to play an alert melody at a specific time of day.
To set the alarm clock function:
1. Press and hold Buttons 2 and 3 until the remote beeps three times.
· The alarm clock bell and three bars will be shown indicating alarm clock set mode is en-
tered.
2. Press Button 2 until the desired hour is displayed.
3. Press Button 3 until the desired minute is displayed. The button may be held down to
scroll faster.
4. When the desired time is displayed, press Button 5 to store.
· The remote will beep 3 times to indicate the alarm clock has been set.
To disable the alarm clock function:
1. Press and hold Buttons 2 and 3 until the remote beeps three times.
· The alarm clock bell and three bars will be shown indicating alarm clock set mode is en-
tered.
2. Press Button 1 to disable the alarm clock.
The remote will beep 3 times and show OFFto indicate the alarm clock has been disabled.
Setting The Call (Hot Alert) Temperature
To change the Call temperature:
1. Press and hold Buttons 2 and 3 until the remote beeps five times.
· C °will be shown indicating call temperature set mode is entered.
2. Press Button 2 to increase the temperature. The button may be held down to scroll faster.
3. Press Button 3 to decrease the temperature. The button may be held down to scroll faster.
4. When the desired temperature is displayed, press Button 1 to store the value.
The remote will display the temperature and beep 3 times then 4 times to indicate the set
temperature.
*Note this function is not available when remote lockout is selected.
Setting The Hot Start Temperature
To change the Hot Start temperature:
1. Press and hold Buttons 2 and 3 until the remote beeps six times.
·h °will be shown indicating automatic hot start temperature set mode is entered.
2. Press Button 2 to increase the temperature. The button may be held down to scroll faster.
3. Press Button 3 to decrease the temperature. The button may be held down to scroll faster.
4. When the desired temperature is displayed, press Button 1 to store the value.
The remote will display the set temperature and beep 3 times then 4 times to indicate the set
temperature.
*Note this function is not available when remote lockout is selected.

K9 Features Described
The K9 functions operate independently of the alarm functions even though they share a
common remote control. The K9 functions can be activated while the alarm functions are
disarmed and vies-versa. The K9 functions and alarm functions can also be activated and
armed at the same time. The K9 functions can be broken down into the following features;
Engine control, Temperature Alert, and Door Pop.
Auto Start Engine Control Enabled (See Programming Branch 7 in the installers guide)
With auto start enabled the system will start the vehicle’s engine whenever the following
conditions are present.
The vehicle must be in park in order to activate the K9 functions
K9 functions are activated (control switch LED is solid)
The temperature is at or above the Hot Start Temperature Setting (Default 75)
With auto start disabled the system will trigger the engine to automatically run whenever the
vehicle arrives. Pressing the brake pedal again will shut down the engine run.
The system will send a Call and sound the hot temperature alert when the K9 functions are
activated and the temperature is at or above the Call temperature. Typically the alert will
cause only the horn to honk, but this feature is also programmable.
In addition, if the system is set to passive K9 feature (Default) the system will automatically
activated every time the vehicle transmission is shifter into park and the brake pedal is re-
leased. It will further keep the vehicle’s engine running if the temperature is above the Hot
Start setting and will automatically delay the alert if the temperature is at or above the Call
(Hot Alert) setting for 5-10 minutes. (Default 5 Min, See Branch 5)
Page 11

K9 Features Described Continued
Page 12
Aux1
Trigger Aux2 Trigger K9 Function Activated
Time, Run Time, Tempera-
ture Report, Button 5 Menu,
Remote Settings
Alarm
Status
Battery
Level
Hot Alert
Call
Engine
Running
Trunk
Door Pop
1-Way Remote
The 1-Way Remote is supplied to you as a back-up incase your LCD remote is lost or
stolen. You can still operate the alarm functions, remote start, and programming features
with this remote. Note, the 1-Way remote will not receive alert signals and does not have
all of the functions of the LCD remote.
Button 1
Button 2
Button 3
Button 5
Button 4
Transmit LED

The Alarm functions operate with the same features that are available on most of the car
alarms available today and include many auxiliary features as well as remote start.
Functions include
Separate Arm and Disarm buttons on the remote that also can lock and unlock the vehicles
doors.
Forced entry detection while armed with separate inputs for doors, hood, trunk/camper shell,
and for sensors such as impact or motion detectors. Note, the sensor inputs can also be config-
ured to have different functions. Please consult with your installer or review the installation
options for details. Typically the alarm trigger will cause the alarm siren to sound and the
horn to honk, but this feature is also programmable.
Remote Start with a 15 minute run time
Auxiliary 1 Can trigger slider doors, windows, etc.
Auxiliary 2 Can trigger slider doors, windows, etc.
Auxiliary 3 Can be used as a door pop output (K9 functions activated), trunk pop output
The Keychain remote
Button #1 is used to turn On the vehicle security system which is connected to all entry doors.
Pressing and holding button 1 for 4 seconds triggers the panic mode and sound the alarm.
Button #2 is used to turn Off the vehicle security system.
Button #3 When button 3 is held for 2 seconds it can to trigger the auxiliary 1 output at the
ECU. This is usually a door pop or trunk pop output.
Button #4 When button 3 is held for 2 seconds it will remotely auto start the vehicle.
Button #5 Shift Key. When button 5 is pressed momentarily it acts as a shift key which can
be used in combination with buttons 1-4 to trigger more functions or to arm/disarm a second
vehicle.
For two vehicle operation the remote must first be programmed to the second vehicle. Once
programmed you can momentarily press button 5 then momentarily press button 1 to arm the
second car alarm. You can likewise momentarily press button 5 then momentarily press but-
ton 2 to disarm the second car alarm.
To trigger auxiliary 1 you can momentarily press button 5 then momentarily press button 3.
To trigger auxiliary 2 you can momentarily press button 5 then momentarily press button 4.
Alarm Functions Described
Page 13

// Button1/ Button2/ Button3/ Button4
Branch1 // Passive/ Manual K9System Activation * User
Branch2 // 95f/ 90f/ 100f/ Hot Alert Temperature * User
Branch3 // Horn/ Siren/ Both Temperature Alert Warning User
Branch4 // 15min/ 5min/ 10min/ Disable Remote Temperature Poll User
Branch5 // 5Min/ 7Min/ 10Min Alert Delay Timer User
Branch6 // Enable/Disable K9SystemAutoOn Pin S4 Tech
Branch7 // TemperatureAutoStart/ EasyIdle Engine Controller User
Branch8 // 75f/ 80f/ 85f Hot Start Temperature * User
Branch9 // No Selection
Branch10 // Door Pop/ Trunk Pop Output Selection Pin M1 Tech
Branch11 // 5deg/ 10deg/ 2deg Hot Start Hysteresis. User
Branch12 // External Pop receiver/ Sensor Input Pin 2 Tech
Branch13 // Disable/ Enable Remote Feature Lockout Tech
Branch14 // Enable/ Disable Disarm before PinM1 Tech
Branch15 // Disable/ Enable Rearm after PinM1 User
Branch16 // FactoryAlarmDisarm/ Ignition Output Pin M10 Tech
Branch17 // Pulse/ Timed/ Latched/ HotStart Aux1 Output Pin A7 Tech
Branch18 // Pulse/ Timed/ Latched/ Hot Alert Aux2 Output Pin A6 Tech
Branch19 // Manual/ Passive Alarm Arming User
Branch20 // Disable/ Enable Auto Alarm Rearm User
Branch21 // Siren/ Both/ Silent Arming Chirps * User
Branch22 // No Selection
Branch23 // Single/ Double Door Unlock Pulse Tech
Branch24 // 1 Second/ 3 Seconds Door Lock Pulse Length Tech
Branch25 // Disable/ Enabled Passive Door Locking Tech
Branch26 // Disable/ Enable Lock After Start Tech
Branch27 // Disable/ Enable Lock After Shutdown Tech
Branch28 // Normal/ Extended/ SuperExtended Smart Start Crank Time Tech
Branch29 // Enable/ Disable Smart Start Temperature Compensation Tech
Branch30 // SmartStart/ Tach Engine Sense Mode Tech
Branch31 // RPMLearnTach/ GasEngine/ DieselEngine Program Engine Tech
Branch32 // Acc/ Ignition Pin i3 Output Type Tech
Branch33 // Negative/ Positive Wait to Start Input Type Tech
Branch34 // Enable/ Disable Turbo Timer Tech
Branch35 // Enable/ Disable Open Door Report Tech
*Asterisk denotes that the feature can be changed on the remote menu
User denotes that the feature can be changed by the user.
Tech denotes that the feature can be changed by the user.
Page 14

Page 15

Phone: 877-K9-SAFE-T
Phone: [phone]
Located in Glendale, AZ
A Better Breed of Systems™
K9Safety warrants that all K9Safety products are free from defects in workmanship
and materials from the factory. K9Safety will repair or replace any part or parts that
K9Safety has examined and that K9Safety is satisfied were originally defective. Defective
parts must be returned to K9Safety accompanied by a copy of the corresponding K9Safety
invoice with transportation charges prepaid within one year of the date of purchase.
This warranty is void if the products or parts have been subject to improper installation,
misuse, accident, negligence, or unauthorized service. This warranty is void if the unit(s)
have been modified or if the unit(s) are used in a fashion not intended by K9Safety. This
warranty does not cover service or labor charges that may be incurred during replacement
or repair.
K9Safety will not be responsible for expense, loss, or damage caused indirectly or di-
rectly by the use of K9Safety products, or any other cause.
No person, dealer or agent is authorized to make modifications or additions to this warranty
or to assume any other liabilities on behalf of K9Safety.
Removing or defacing serial numbers or other identification, or accessing internal compo-
nents will void the warranty stated above.
The rights granted to you by this warranty may be supplemented or restricted by state law.
Copyright K9Safety 2009