When the machine is received, the heating pipe does not work in two cases:
1. The heating tube glass tube is broken due to the vibration during
logistics transportation, and the heating tube cannot work.
2. The heating wire is broken due to vibration during logistics transportation, and
the heating pipe cannot work after 1-3 times of using the machine.
The following problems will occur due to the inevitable falling of articles
during transportation:
In case of the above situation, our company promises to send a new
heating tube and a replacement video to Shunfeng Bao. Replacing the
heating tube is very simple.
Important note:
Please be sure to confirm receipt after unpacking inspection. If the shell is bumped,
contact customer service to send a new shell.(If the paint is knocked off in special
parts, contact the customer service to replace the machine)
warning
To ensure the safety of use and avoid injury and property damage to you and others
●
●
●
●
●
●
●
●
●
●
●
●
Do not open the rear cover plate when power is on. Non professionals shall not carry
out live maintenance.When replacing accessories, unplug the power plug before
opening the rear cover plate. Only after the replacementis completed can the
machine be plugged in and tested.
Over roasting of coffee beans is prohibited.
Do not wet the power socket with water.
Please do not leave during roasting!Avoid excessive heating and
burning of coffee beans due to no supervision.
Safety warnings must be learned. It is forbidden for non learners to operate
the baking machine. Children should stay away from the baking machine.
When heating, the bean bin must be stirred, otherwise the bean
bin will be deformed due to excessive heat on one side.
The set bean temperature should not exceed degrees.230
The silver peel of coffee beans collected should be cleaned in time
to avoid burning due to the accumulation of silver peel.
The device must be placed in a well-ventilated place,
and no flammable materials behind. Do not cover the .exhaust vents
During the baking and heating, the surface temperature of the
equipment is high.Do not touch the surface of the device to avoid
burns. (The red area is the high temperature area)
after roasting is completed, and stirr the bean cabin
turn on the exhaust smoke.And turned off the roaster after
temperature of the beans drops .below 50 degrees
the new equipment will have some smell of the
spray paint, and it will dispel after baking times.2-3
Heat shield
fixing button
High
temperature
area
