KALOS KLEH113-0200 User manual

Universal Electric Heater
Pendant
KLEH113-0200
Assembly Instructions
Sept 2020
IMPORTANT
PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE.
THIS IS IMPORTANT INFORMATION REGARDING THE USE AND
CARE OF YOUR HALOGEN HEATER.

Important Information
Important advice
beforeyoubegin:
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge if they have been
given supervision or instruction concerning use
of the appliance in a safe way and understand
the hazards involved.
Children should not play with theappliance.
Cleaning and user maintenance should not be
made by children withoutsupervision.
Do not use any other tools other than those
recommended to build this product.
Please do not use substitute parts. Use only additional or replacement parts supplied by Kettler.
In the unlikely event that this product has missing or damaged parts, please visit our website
www.kettler.co.uk/shop.
Unpack the halogen heater making sure that all the items are present and that
there are no components left in the box and that the heater head is free from any
packing material.
Using the detailed drawing follow the steps to assemble your halogen heater.
DO NOT connect the halogen heater to the electrical supply until all the
assemblyiscomplete.
DO NOT connect the halogen heater to the electrical supply if any of the
components or the power cord is damaged in any way.
If in doubt contact your supplier.

For Your Safety
Warning
• This heater is not equipped with a device
to control the room temperature. DO
NOT use this heater in small rooms when
they are occupied by persons not capable
of leaving the room on their own, unless
constant supervision is provided
Caution
• Some parts of this product
can become very hot and
cause burns. Particular attention has to
be given where children and vulnerable
people are present.
Important Instructions
When using this electric unit, basic safety precautions should be followed to reduce the risk of
re, electric shock, and injury to persons, including the following:
1. Mount the heater outside or in a large
open area and well away from any
obstructions such as branches or where
the heater is near any objects that can
be aected by heat, such as furniture,
curtains or other inammable objects
(minimum distance 1 meter).
2. DO NOT position immediately above or
below an electrical socket.
3. The unit must be placed with the
clearance of 180cm to the oor and
50cm to the ceiling.
4. When the power supply cord is
damaged, it must be replaced by a
qualied engineer to avoid danger.
5. This appliance is not intended for use
by persons (including children) with
reduced physical. Sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
6. Children should be supervised to ensure
that they do not play with the appliance.
7. Read ALL instructions before using
thisunit.
8. CAUTION: Risk of Electric Shock. DO
NOT open or try to repair the heater
yourself.
9. This heater may get hot when in use. To
avoid burns, DO NOT let bare skin touch
hot surfaces. If provided, use handles
when moving this heater.
10. Keep combustible materials, such as
furniture, pillows, bedding, paper,
clothes, and curtains at least 3 ft from
the front of the heater and keep them
away from the sides, top, and rear. DO
NOT place towels or other objects on the
heater.
11. DO NOT leave turned on and
unattended especially when children
and/ or animals are in the vicinity.

For Your Safety
12. DO NOT operate any heater with a
damaged cord or after the heater
malfunctions, has been drooped
or damaged in any manner. Return
heater to authorized service facility for
examination, electrical or mechanical
adjustment, or repair.
13. This heater is not intended for use in
bathrooms, laundry areas and similar
indoor locations. NEVER locate heater
where it may fall into a bathtub or other
water container. To protect against
electrical hazards, DO NOT immerse
in water or other liquids. DO NOT use
nearwater.
14. DO NOT touch the control panel or plug
with a wet hand.
15. DO NOT run cord under carpeting. DO
NOT cover cord with throw rugs, runners
or similar coverings. Arrange cord away
from trac area and where it will not be
tripped over.
16. DO NOT insert or allow foreign objects
to enter any ventilation or exhaust
opening as this may cause an electric
shock or re, or damage the heater.
17. To prevent a possible re, DO NOT block
the air intakes or exhaust in any manner.
DO NOT use on soft surfaces, like a bed,
where openings may become blocked.
18. DO NOT use in unventilated areas.
19. A heater has hot and arcing or sparking
parts inside. DO NOT use in areas
where gasoline, paint, explosive and/
or ammable liquids are used or stored.
Keep unit away from heated surfaces and
open ames.
20. Avoid the use of an extension cord
because the extension cord may
overheat and cause a risk of re.
However, if you have to use an
extension cord, the cord shall be 2.5mm2
minimumsize.
21. To avoid re or shock hazard, plug the
unit directly into a 220-240V and 13A
electrical socket outlet.
22. To disconnect heater, turn controls to
OFF, then remove plug from outlet.
Pull rmly on plug, DO NOT unplug by
pulling on the cord.
23. Always unplug the unit before moving or
cleaning, or whenever the heater is not
in use.
24. Use only for intended household use as
described in this manual. Any other use
not recommended by the manufacturer
may cause re, electric shock, or injury
to persons. The use of attachments not
recommended or sold by unauthorized
dealers may cause hazards.
25. Always use on a dry, level surface. Use on
ceiling only.
26. WARNING: To reduce the risk of re or
electric shock, DO NOT use this unit with
any solid-state speed control device.
27. DO NOT attempt to repair or adjust any
electrical or mechanical functions on this
unit. Doing so will void your warranty.
The inside of the unit contains no user
serviceable parts. Qualied personnel
should perform all servicing only.
28. Connect to properly grounded
outletsonly.

Product Diagram & Technical Specications
29. The heater must not be located in front
of a socket outlet.
30. SAVE THE SE INSTRUCTIONS.
Product Diagram
Technical specication
• Model:ZHQ2068-RMLED-SQ
• Power supply 220-240V 50-60Hz
• Wattage 2000W
• Net weight 3.1 kg
• Insulation class I
• Height 10cm
Wirerope
Power Cord & Plug
Heater Cover
Safety Net
LED Light
Switch

Installation & Assembly
Installation
A. Place the heater on a rm, level ceiling surface; level ceiling surface; installation of the heater
on a strong rigid support (such as strong wooden beams or metal rails etc).
B. The Hook on the ceiling hanging the Patio Heater must be able to take a weight 3 or 4 times
that of the Patio Heater itself.
C. The distance between the bottom of the Patio Heater to the Floor must be over1.8M.
D. Plug the Patio Heater into a grounded 220-240V 50-60Hz 13A power outlet.
E. Only operate the heater when it is in the upright position.
Assembly
Follow the below steps to install the heater:
WARNING: Please tear o all of the protective
lm around the shade rst.
• Step 1: Pull out the
stainless steel wire to a
appropriate position in
direction of up arrow
1

Assembly
• Step 2: Unscrew the hook
nut in direction of arrow.
• Step 3: Tighten the nut in
direction of rotation arrow.
2
3

Assembly & Trouble Shooting
CEILING
FLOOR
min. 25cm
min. 50cm min. 180cm
WALL
Minimum Required Distances:
• 25cm from the side wall
• 50cm from the ceiling
• Installation height above 180cm
Trouble Shooting
If the heater will not operate, please check the following before seeking repair of service:
• Check if the power cord is plugged into an electrical outlet, if not plug in.
• Check if electricity to the main fuse is working.
• Make certain the power switches are turned on. If not, choose a setting.

Operation Instructions
Operation
• Plug the Patio Heater into a grounded 220-240V 50-60Hz power outlet.
• Only operate the heater when it is in the upright position.
• Press on the On/O switch to the“I” position to activate the heater.
Remote Control
• To operate the heater on 2000W power, press the button ( ) of the
remote control.
• To operate the LED light on, press the button ( ) of the remote control
Touch Switch
A. Touch the one time, turns the heater on 2000W power.
B. Touch the two times, turns the LED on.
C. Touch the three times, turns the heater on 2000W power and
turns the LED on.
D. Touch the four times, turns the heater and LED o.
To turn o the heater, press the On/O switch to the“O”position.
• Although the patio heater is shower proof, do not use when raining or in wet conditions.
• Always disconnect the power cable from the electrical supply, when the patio heater is
notinuse.
WARNING: The heater must be properly installed before it is used This unit is
equipped with one heat setting On I O.
On/O Switch

Maintenance and Care Instructions
• Unplug the unit and let it cool completely.
• To keep the heater clean, the outer shell
may be cleaned with a soft, damp cloth. You
may use a mild detergent if necessary. After
cleaning, dry the unit with a soft cloth.
• DO NOT use alcohol, gasoline, abrasive
powders, furniture polish, or rough brushes
to clean the heater. This may cause damage
or deterioration to the surface of the heater.
• Although this heater is outdoor approved,
DO NOT immerse the heater in water for
your safety.
• The light source of this luminaire is not
replaceable; when the light source reaches
its end of life the whole luminaire shall
bereplaced.
• Wait until the unit is completely dry
beforeuse.
• Check all components regularly for correct
function, damage and loose connections
especially at the start of the season and at
1-2 month intervals dependent on use.
• Damaged components may endanger your
safety or shorten the life of the product.
Replace all damaged parts immediately.
Use only spare parts manufactured by
Kettler. Should you wish to purchase spare
parts, they can be ordered directly from:
www.kettler.co.uk/shop
• Kettler will not be responsible for damaged
caused by improper use.
Storage
• If the heater will not be used for a long
period of time, store it in a cool, dry location
when not in use. To prevent dust and dirt
build-up, use the original packaging to
repack the unit.
www.kettler.co.uk
Warranty For Home Use
This product is covered by a 12 month
warranty against manufacturing faults.
This warranty applies to domestic use
only. It does not cover commercial use,
mis-use or accidental damage.
To validate your warranty, register
at www.kettler.co.uk and quote
the product code from the front of
this booklet.
12Mth
Warranty