KAM LED Moonglow User manual

Worldwide Trade Distributors
JHS, SALEM HOUSE, PARKINSON APPROACH, GARFORTH, LEEDS LS25 2HR, UK.
©2019 JHS. Specifications are subject to change without prior notice. Made in China.
Kam LED MOONGLOW

1. BEFORE YOU BEGIN
Unpacking Instructions
Carefully unpack the carton, check the contents to ensure that all parts are present and
have been received in good condition. Notify your dealer immediately and retain packing
material for inspection if any parts appear to be damaged from shipping or the carton itself
shows signs of mishandling. Keep the carton and all packing materials. In the event that a
product must be returned for repair, it is important that it be returned in the original box
and packing.
Safety Instructions
Please read these instructions carefully, they include important information about the
installation, usage and maintenance of this product.
• Please keep this User Guide for future reference. If you sell the unit to another user, be
sure that they also receive this instruction booklet.
• Always make sure that you are connecting to the proper voltage, and that the line voltage
you are connecting to is not higher than that stated on the bottom of the fixture.
• This product is intended for indoor use only!
• To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there
are no flammable materials close to the unit while operating.
• The unit must be installed in a location with adequate ventilation, at least 20in (50cm)
from adjacent surfaces. Be sure that no ventilation slots are blocked.
• Always disconnect from power source before servicing or replacing fuse and be sure to
replace with same fuse size and type.
• Maximum ambient temperature (Ta) is 104° F (40°C). Do not operate the product at
temperatures higher than this.
• In the event of a serious operating problem, stop using the unit immediately. Never try to
repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or
malfunction. Please contact the nearest authorized technical assistance center. Always use
the same type of spare parts.
• Don’t connect the device to a dimmer pack.
• Make sure the power cord is never crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
• Avoid direct eye exposure to the light source while it is on.
• The external flexible cable or cord of this luminaire cannot be replaced; if the cord is
damaged, the luminaire shall be destroyed.
The device operates to the rhythm of the music. When there is no sound, the unit runs
automatically.
9073 LED Moonglow
Specifications
Voltage: AC220-240V / 50-60Hz
Power consumption: 20W
Light source: 6 x 1W RGBWAP LEDs
Beam Angle: 6°
Dimensions (WxHxD): 170 x 140 x 175mm
N.W: 0.6kg G.W: 0.7kg
LED MOONGLOW MANUAL
OPERATION