KAP MR-LVT-170925 User manual

LEVANTE 2017year
QUATTROPORTE 2017year
GHIBLI 2017year
(VIDEO Interface)
MODEL
MR
-LVT-170925
DATE
2017.11.20

Main Spec.
1. Input Spec. (MULTI VIDEO INTERFACE)
- 1 x Analog RGB Input (Navigation System source)
- 1 x Digital RGB Input (Navigation System source)
- 1 x CVBS(REAR CAMERA) Input. (Rear camera source)
- 1 x CVBS(FRONT CAMERA) Input. (Front camera source)
2. Output Spec.
- 1 x LCD Output (LCD Operation)
- 1 x Analog Touch (Navigation System source)
3. Power Spec.
- Input Power : 8VDC ~ 24VDC
- Consumption Power : 12Watt, Max
4. Switch Input mode
- Possible to select CAR model while switching mode by DIP S/W
- By button on the Commander in the car via CAN

External Appearance
POWER/CAN Video
R-TOUCH Analog
RGB
Digital
RGB
LCD-OUT
Rear
Camera
DIP S/W IMAGE
PROGRAM LED

Connector Pin Assignment
*NAVI Connect
①R DATA (Red)
②G DATA (Green)
③B DATA (Blue)
④SYNC (White)
⑤GND (Black)
⑥DVB-T IR (Green)
⑦DVD IR (Orange)
①②③④⑤⑥⑦
*POWER Connect
1. Battery (Yellow)
2. Battery (Yellow)
3. Rear-DET (Brown)
4. Front-DET (Blue)
5. CANin-L (White)
6. CANin-H (Purple)
7. CANout-L (Blue)
8. CANout-H (Red)
115
2 16
9. CAN-L (Green)
10. CAN-H (Orange)
11. ACC (Red)
12. Rear-VCC (Red)
13. Front-VCC (Red)
14. Mode (Green)
15. GND (Black)
16. GND (Black)
*Touch Connect
①Y-
②X-
③Y+
④X+
① ② ③ ④

Product Composition
Interface 1 EA
FD-PAS-170327
LVDS Cable(800mm) 1 EA
Power Cable 1 EA
OSD Board 1 EA
SUB Board (R01) 1 EA
Touch IN/OUT 4-pin Cable(180mm) 1 EA
RGB NAVI Cable 1 EA
LVDS FFC Cable 2 EA
60*100*0.5*P6 opposite direction
30*100*1.0*P7 right direction
LVDS extension Board 1 EA

DIP S/W Setting
* ON : DOWN , OFF : UP
PIN FUNCTION DIP S/W Selection
1 NAVI ON : Not Used
OFF : Used
2 AV1 (DVB-T) ON : Not Used
OFF : Used
3 AV2 (DVD) ON : Not Used
OFF : Used
4 N.C
5 N.C
6
CAR type SEL Right Picture7
8
* DIP S/W Example
LEVANTE(2017) 8”
QUATTROPORTE(2017) 8”
GHIBLI(2017) 8”

Mode Change
NAVI AV1 AV2OEM
※The screen is switched in order as the pictures below
Press long : switching mode
Press Short : switching to OEM directly

Mode Change
* Steering Wheel Button Control
Push long –Mode Change
NAVI AV1 AV2OEM
※The screen is switched in order as the pictures below
•Use Steering button, Enter OSD menu, and select “ON”
If not use, select “OFF”

Touch Control
Push 7sec on the NAVI / AV1 / AV2 screen (just 1 screen)
Press+
Touch calibration

Touch Control
DVB-T/DVD Control
Press Touch(Anywhere)
Press Icon
DVB-T DVD

OSD(On Screen Display) Control
MENU Push -> OSD menu On/Off
SEL Item Selection, Value Selection
UP Item up
Increase selected value
DOWN Item down
Decrease selected value
Mode State
First Menu Second Menu Third Menu
OSD Control Board
MENU SEL UP DOWN

OSD(On Screen Display) Control
First Menu Second Menu Third Menu Action
Option
RearCam-Type OEM Original Camera
ExtDevice Use aftermarket Rear camera
RearCam-Power
ON Rear camera get +12V consistently
AUTO Rear camera get +12V when reverse gear on
OFF Shut out the power supply.
FrontCam-Type OEM Original Camera
ExtDevice Use aftermarket Front camera
FrontCam-Power
ON Front camera get +12V consistently
AUTO Front camera get +12V when reverse gear on
OFF Shut out the power supply.
RearCam-RcvOpt ON Show Frontcam 25sec after rear mode.
OFF Default
Reset Excute Option Menu all Reset

OSD(On Screen Display) Control
First Menu Second Menu Third Menu Action
Image
Brightness Adjust the value of brightness
Contrast Adjust the value of contrast
Color-RED Adjust the value of RED
Color-GREEN Adjust the value of GREEN
Color-BLUE Adjust the value of BLUE
Reset Excute Option Menu all Reset
First Menu Second Menu Third Menu Action
Image
Brightness Adjust the value of brightness
Contrast Adjust the value of contrast
Saturation Adjust the value of Saturation
Hue Adjust the value of Hue
Sharpness Adjust the value of Sharpness
Reset Excute Option Menu all Reset
NAVI-RGB menu DVD,DVB-T(DMB),NAVI-AV,REAR,FRONT menu
<< Brightness >>
<< Contrast >>
<< Saturation >>

OSD Setting–Screen Mode
- Horizontal
- Vertical
- Scaler X Up
- Scaler X Down
- Scaler Y Up
- Scaler Y Down
OSD(On Screen Display) Control

OSD(On Screen Display) Control
OSD Setting –Parking Mode On/Off
Parking Line ON Parking line OFF
On Reverse mode enter this OSD menu

OSD(On Screen Display) Control
OSD Setting –Warnings Language Change

- Option -> RearCam-RcvOpt -> 0 second = RearCam-RcvOpt menu OFF
1~30 second = RearCam-RcvOpt menu ON & time control
OSD(On Screen Display) Control
OSD Setting –Front Camera Auto Mode
OEM
NAVI
AV1(DVB-T)
AV2(DVD)
REAR FRONT
OEM
NAVI
AV1(DVB-T)
AV2(DVD)
1~30 second

- Factory Reset : Execute - Reset All (Setting Default)
- Version : FW Version
Finish update FW, check the FW versoin
OSD(On Screen Display) Control
OSD Setting –Utility Mode
Software Version
Software Month
Software Year
Special Version
National : CN=CHINA, KR=KOREA, JP=JAPAN, US=United States
Hardware Version
PIP model : PP=PIP, LV=LVDS
Motor model : BM=BMW, BE=BENZ, MA=MASERATI, LX:LEXUS
Last Source : BEPP06SGX-130950

Install Manual
1. Installation Navigation Connection
MASERATI 2017
INTERFACE
RGB
TOUCH
*KD-900 navigation
KD-900
POWER/CAN LVDS-OUT
DVD-IR
DVBT-IR
GND
SYNC
BLUE
GREEN
RED
Analog RGB
Resistive Touch
X+
Y+
X-
Y-
GND (Black)
ACC-POWER (Red)
Battery (Yellow)
16. GND (Black)
15. GND (Black)
14. Mode (Green)
13. Front-Power (Red)
12. Rear-Power (Red)
11. ACC (Red)
10. N.C
9. N.C
8. CAN-H (Purple)
7. CAN-L (White)
6. CAN-H (Orange)
5. CAN-L (Green)
4. Front-Camera Detect (Blue)
3. Rear-Camera Detect (Brown)
2. Battery (Yellow)
1. Battery (Yellow)

Install Manual
2. Installation DVB-T Remote Control Connection
TUE-T440
GEX-909DTV
선택1
선택2②
①
①or ②
DVBT-IR
DVD-IR
DVBT-IR
GND
SYNC
BLUE
GREEN
RED
MASERATI 2017
INTERFACE
RGB
TOUCH
POWER/CAN LVDS-OUT
GND (Black)
ACC-POWER (Red)
Battery (Yellow)
16. GND (Black)
15. GND (Black)
14. Mode (Green)
13. Front-Power (Red)
12. Rear-Power (Red)
11. ACC (Red)
10. N.C
9. N.C
8. CAN-H (Purple)
7. CAN-L (White)
6. CAN-H (Orange)
5. CAN-L (Green)
4. Front-Camera Detect (Blue)
3. Rear-Camera Detect (Brown)
2. Battery (Yellow)
1. Battery (Yellow)