Kaser PlayIt User manual

PlayIt
Quick Guide
V1.0

Thank you for purchasing the PlayIt; it is a versatile Smart Signage Device that allows you to easily display
pictures, video shared by your family members, friends from YouTube and Social Media such as Facebook,
Twitter andGoogle+. You can also use the Kloud Camera that comes with PlayIt to have video chat or
conference with your associates or friends. Using PlayIt is easy, you can use a Remote Controller or Voice
(under Kloud Player) to operate PlayIt and enjoy multimedia content such as video, photos, music and
more.
1. Contents
Package Contents:
PlayIt x 1
Remote Control x 1
Kloud Camera x 1
Power Adapter x 1
HDMI Cable x 1
Quick Guide x 1
Inspect all package contents visually. If any items are missing or damaged from your package, please contact
the distributor or the reseller where you purchased your device.
2. Getting Familiar with the PlayIt:
Front Panel
Top Cover
Rear Panel
Right
Side
Panel
IR Signal Receiver
Left
Side
Panel
TF Card
USB1
DC Input
AV/Out LAN HDMI
USB2

Play
Your
Own
Cha
nnel
3. Connecting PlayIt:
What You Need to Get PlayIt Installed and Connected:
The PlayIt,
TV / LCD Monitor with HDMI interface,
HDMI cable,
An Internet connection:
An Ethernet Hub, Switch or IP sharing device or
A WIFI/WLAN Connection
A segment of Cat.5 UTP cable for connecting to hub or switch (needed only when you
choose wired connection)
A Power Adapter.
A Google Gmail account for logging into the Android system.
(Please register for a free Gmail account: www.gmail.com, if you do not have one.)
Connecting Kloud Camera, HDMI connectors to the PlayIt:
Applying Power to the PlayIt:
Connect DC Jack of the power adapter into the PlayIt and plug the Adapter end into an AC
power outlet.
Connecting PlayIt to your Local Area Network:
If you use Wired LAN connection:
Connect one end of the Cat.5 UTP cable to your Ethernet Hub or Switch.
Connect the other end of the UTP cable to the Ethernet port on the rear panel of the
PlayIt.
If you use Wireless LAN connection, make sure a WiFi Access Point or an IP Sharing device
with WiFi support is in place and ready for the PlayIt to get connected.
HDMI
USB
Kloud Camera

4. Getting Ready for the First Boot:
PlayIt will enter a “Setup Page”if this is the first time that PlayIt is booted up.
5. Steps on Configuring PlayIt:
Please refer to the User’s Guide by following all steps specified in this Guide.
To personalize PlayIt with your preferences, Scan the QR Code on the PlayIt screen using a
Smart Phone or just type in the URL address next to the QR Code: http://goo.gl/shortURL at the URL
address entry of the Browser of your Laptop PC or Desktop PC:
6. Operations using Remote Controller:
Navigation Buttons & Functions:
OK
>
>
>
>
Paly all videos of
this playlist /Next
video
Update
the
playlist
Switching among Standard Screen, Full Video Screen, and Social Media
Next playlist
Press to confirm the selection or
to launch an App on the desktop

Rest of Buttons & Functions:
Buttons: Function
Home: Quick key to launch Kloud Player (the default launcher)
Mouse/Object Mode: Toggle between Mouse Mode and Object Model
Power Button: Short press to Power On, long press to Power Off
For more details, please refer to the User’s Guide by following all steps specified in this Guide.
Cursor mode:
This mode are for navigation, select, and keyboard input :
Press the cursor mode will switch the remote to cursor mode input. This should
do all you want when in the same page. The screen will indicate the remote has
entered into cursor mode and cursor will come out from the screen. You are
recommended to stay in this mode unless the page scrolling up and down.
Remote mode:
This mode is only for scrolling up and down and selection. Just press the cursor
mode will switch back to remote mode.
Kloud Player
Back Button
Volume Up
Power Button
Volume Down
Voice Input
Mouse/Object
Mode Toggle