KEBCO COMBIVERT S6 Series User manual

COMBIVERT S6 - Installation of the shield clamp
Required tools:
• Phillips screwdriver Type PH2
Figure 1: General overview
• Unscrew the marked screws with the screwdriver.
Figure 2: Loosening screws
KEB Automation KG Südstraße 38 32683 Barntrup www.keb.de E-Mail: [email protected] Tel.: [phone] Fax: -116 Doc.: ma_dr_shield-clamp-20154734_en 06/17
Installation instructions

• Remove the screws together with the clamping brackets.
Figure 3: Removing screws and clamping brackets
• Place shield clamp on top.
Figure 4: Placing shield clamp on top
• Reattach the screws and clamping brackets using the screwdriver.
Figure 5: Reattaching the screws and clamping brackets
KEB Automation KG Südstraße 38 32683 Barntrup www.keb.de E-Mail: [email protected] Tel.: [phone] Fax: -116 Doc.: ma_dr_shield-clamp-20154734_en 06/17
Installation instructions