Keller K5200 User manual

Questions? Call 1-800-578-8772 M-F, 9-3PM EST
Items Required for Assembly:
•K5200 Boxes: K5200-1, K5200-2 and K5200-3
•Tools Needed: Phillips Head Screwdriver
Note: Assembly can be done with just one person, but is recommended to have
another for assistance in some parts of assembly.
K5200 Assembly Instructions

Questions? Call 1-800-578-8772 M-F, 9-3PM EST
Unpack Boxes: K5200-1, K5200-2 and K5200-3 (2 Lower Sections and Top)
**Parts Bag Includes:
•Wooden Dowel Pins (Qty. 4)
•Cam Lock Nuts (Qty. 4)
•Cam Lock Screws (Qty. 4)
**Note: Parts bags are in the drawers of boxes K5200-1 and K5200-2. You should
have 2 bags of parts totaling to 8 pieces per item.

Questions? Call 1-800-578-8772 M-F, 9-3PM EST
1) Unscrew the drawer and cabinet handles that are positioned on the inside
and position them on the outside.
2) Using a Phillips Head Screwdriver, screw in the Cam Lock Screws into the
top and bottom row of the table top and place the Wooden Dowels in the
middle rows of the table top.

Questions? Call 1-800-578-8772 M-F, 9-3PM EST
3) Take the Cam Lock Nuts and insert them into the holes with the open
section facing upward into each hole located in the open spaced shelf of each
lower section.
4) Take the top and insert the Cam Lock Screws and Wooden Dowels that are
sticking out of the top into the top holes of each lower section.
Note: This step is easier with the assistance of another person to rotate the top
and position to each lower section.

Questions? Call 1-800-578-8772 M-F, 9-3PM EST
5) With the top fully seated, lock all of the Cam Nuts using a Phillips Head
Screwdriver and turn them clockwise. You will feel the Cam Nut grab onto the
Cam Screw as you turn the Screwdriver.
6) The assembly of your Caroline Manicure Table is now complete.
Note: When moving your Manicure Table to desired location, it is best to have a
person at each side lifting from the lower section sides and not the top itself as it
will damage your Manicure Table.
Note: Keller International does NOT claim any responsibility for damages due to
modifications done to the unit or damages due to negligence and any damages
from improper setup to the unit.