Kelvinator Reverse Cycle User manual

201020 66129904148

CONTENTS
1. SAFETY PRECAUTIONS.................................................................
2. UNIT PARTS IDENTIFICATION.......................................................
3. OPERATING INSTRUCTIONS ........................................................
4. INSTALLATION INSTRUCTIONS.....................................................
5. TROUBLESHOOTING .....................................................................
Inside you will find many helpful hints on how to use and maintain your air
conditioner properly. Just a little preventive care on your part can save you
a great deal of time and money over the life of your air conditioner. You'll find
many answers to common problems in the chart of troubleshooting tips.
If you review the chart of Troubleshooting Tips first, you may not need to
call for service at all.
Contact the authorised service technician for repair or maintenance of this unit.
Contact the installer for installation of this unit.
The air conditioner is not intended for use by young children or infirmed persons
without supervision.
Young children should be supervised to ensure that they do not play with the
air conditioner.
If the power cord is to be replaced, replacement work shall be performed by
authorised personnel only.
Installation work must be performed in accordance with the national wiring
standards by authorised personnel only. Wrong connection can cause overheating
!CAUTION
Read This Manual
1
2
5
6
13
17
This air conditioner should be installed in accordance with AS/NZS 3000:2000
and your electricity suppliers rules.
There are local council rules regarding maximum allowable noise levels emitted
by air conditioners.
or fire.

To prevent injury to the user or other people and property damage, the following
instructions must be followed.
Incorrect operation due to ignoring of instructions may cause harm or damage.
The seriousness is classified by the following indications.
2
SAFETY PRECAUTIONS
This symbol indicates the possibility of death or serious injury.
Meanings of symbols used in this manual are as shown below.
!
!
WARNING
Always do this.
Never do this.
!
CAUTION
This symbol indicates the possibility of injury or damage to property.
Plug in power plug
properly.
Do not modify power cord
length or share the outlet
with other appliances.
Always ensure effective
earthing.
Unplug the unit if strange
sounds, smell, or smoke
comes from it.
Keep firearms away.
Ventilate room before operating air
conditioner if there is a gas leakage from
another appliance.
Otherwise, it may cause electric
shock or fire due to excess heat
generation.
It may cause electric shock or
fire due to heat generation.
Incorrect earthing may cause
electric shock.
It may cause fire and electric
shock.
It may cause fire.
It may cause explosion, fire and burns.
It may cause electric shock or fire
due to heat generation.
It may cause electric shock.
It may cause failure of unit
or electric shock.
It may cause fire and electric
shock.
It may cause fire and electric
shock.
It may cause electric shock or fire.
If the power cord is damaged, it
must be replaced by the manufac-
turer or an authorised service
centre or a similarly qualified per-
son in order to avoid a hazard.
This could harm your health.
Incorrect installation may cause
fire and electric shock.
It may cause electric shock.
It may cause an explosion or fire.
It may cause failure and electric shock.
Do not operate or stop the
unit by inserting or pulling
out the power plug.
Do not operate with wet
hands or in damp
environment.
Do not allow water to run
into electric parts.
Do not use the socket if it is
loose or damaged.
Do not use the power cord
close to heating appliances.
Do not damage or use an
unspecified power cord.
Do not direct airflow at
room occupants only.
Always install circuit
breaker and a dedicated
power circuit.
Do not open the unit
during operation.
Do not use the power cord near
flammable gas or combustibles, such
as gasoline, benzene, thinner, etc.
Do not disassemble or modify unit.
!
!
!
!
!
!
WARNING
!
!

!
CAUTION
When the air filter is to be
removed, do not touch the
metal parts of the unit.
It may cause an injury.
Do not clean unit when
power is on as it may cause
fire and electric shock, it may
cause an injury.
Operation with windows
opened may cause wetting
of indoor and soaking of
household furniture.
When the unit is to be
cleaned, switch off, and turn
off the circuit breaker.
Stop operation and close
the window in storm or
hurricane.
Use caution when unpacking and
installing.
Do not clean the air
conditioner with water.
Water may enter the unit and
degrade the insulation. It may
cause an electric shock.
This could injure the pet or
plant.
It may cause electric shock
and damage.
Do not put a pet or house
plant where it will be
exposed to direct air flow.
Hold the plug by the head
of the power plug when
taking it out.
Ventilate the room well when
used together with a stove,
etc.
An oxygen shortage may occur.
Do not use this air conditioner to
preserve precision devices, food,
pets, plants, and art objects.
It may cause deterioration of
quality, etc.
It may cause failure of product
or fire.
Do not use for special
purposes.
Turn off the main power
switch when not using the
unit for a long time.
If water enters the unit, turn the unit off at the power
outlet and switch off the circuit breaker. Isolate
supply by taking the power-plug out and contact a
qualified service technician.
3
!
!
!
!
!
!
!
It may cause failure of
appliance or accident.
Appearance may be
deteriorated due to change
of product color or
scratching of its surface.
Do not place obstacles
around air-inlets or inside
of air-outlet.
Do not use strong deter-
gent such as wax or
thinner but use a soft cloth.
If bracket is damaged, there
is concern of damage due to
falling of unit.
There is danger of fire or
electric shock.
Ensure that the installation bracket of
the outdoor appliance is not damaged
due to prolonged exposure.
Do not place heavy object on the
power cord and ensure that the cord
is not compressed.
Operation without filters may
cause failure.
It contains contaminants and
could make you sick.
Always insert the filters
securely. Clean filter once
every two weeks.
Do not drink water drained
from air conditioner.
!
!
!
Sharp edges could cause injury. It may cause electric shock and damage.

Safety
Precautions Prior to Operation
Preparing for operation
Usage
Cleaning and maintenance
Service
Operating Temperature
4
1. Contact an installation specialist for installation.
2. Plug in the power plug properly.
3. Do not use a damaged or non-standard power cord.
4. Do not share the same outlet with other appliances.
5. Do not use an extension cord.
6. Do not start/stop operation by plugging/unplugging the power cord.
1. Exposure to direct airflow for an extended period of time could be hazardous
to your health. Do not expose occupants, pets, or plants to direct airflow for
extended periods of time.
2. Due to the possibility of oxygen deficiency, ventilate the room when used
together with stoves or other heating devices.
3. Do not use this air conditioner for non-specified special purposes (e.g.
Preserving precision devices, food, pets, plants, and art objects). Usage in
such a manner could harm such property.
1. Do not touch the metal parts of the unit when removing the filter. Injuries can
occur when handling sharp metal edges.
2. Do not use water to clean inside the air conditioner. Exposure to water can
destroy the insulation, leading to possible electric shock.
3. When cleaning the unit, first make sure that the power and circuit breaker are
turned off.
For repair and maintenance, contact your authorised service dealer.
COOLING MODE
INDOOR OUTDOOR INDOOR OUTDOOR
HEATING MODE
MAX. MIN. MAX. MIN.
OO
32 C 17 C OO 27 C 10 C
OO
43 C 17 C OO 24 C 1 C
MAX. MIN. MAX. MIN.
Note: Performance may be reduced outside of these operating temperatures.

CLOCK SWING
TIMERON TIMER OFF
ENERGY
SAVER SLEEP
LIGHT
FAN ON OFF MODE

OPERATING INSTRUCTIONS
Controls
Vent Control
Revers e Cycle Models
Cooling Only Models
The vent control is located above the control knobs. (see the following figures).
For maximum cooling efficiency, CLOSE the vent. This will allow internal air
circulation. OPEN the vent to discharge stale air.
The electronic control keypad will look like one of the following:
To open the vent, set the lever to the right position
To close it, set the lever in the left position.
OPEN
6
VENT
CLOSE
( 9,000BTU/h Models)
( 9,000BTU/h Models)
SWIN
FILTER
FAN
MOD
POWER
LOW
AUTO
COOL
DRY
FAN
TIMER
SWIN
FILTER
FAN
MOD
POWER
LOW
AUTO
COOL
DRY
FAN
TIMER

beside
There is no green indicator light for “Auto” mode. When you select “Auto”
mode, a beep will sound indicating this “MODE” option was selected.
1/2
1/2
AUTOˈ
A beep will sound indicating that this command is opera-
tional.
within
0~10 hours and 1 hour increments within 10~24 hours.
within 0~10 hours and 1 hour decrements
within 10~24 hours.
TIMER:
Press the "TIMER" keypad to activate the auto start/auto stop timer function.
Auto start/stop programs can be set from 1/2~24 hours. Each depression of the
"TIMER" keypad will increase the selected time in 1/2 hour increments within
0~10 hours and 1 hour increments within 10~24 hours.

This mode is used to decrease the humidity in the room.
OO
The temperature setting are adjustable between 16 C to 30 C . Cooling begins
O
automatically when the room temperature is 1 C above the set point, and stops
O
when the room temperature is 1 C below the set point. The fan will not stop running.
OO
The temperature settings are adjustable between 16 C to 30 C in heating mode.
the fan speed is optional.
When heating stops, there may be a slight delay of 30 seconds for the fan
For the cooling only models, after selecting “AUTO” by “MODE” keypad,the unit
will select the appropriate operating mode from FAN, COOL or DRY based upon the
temperature difference between the actual and desired room temperature.
For the cooling and heating models,after selecting “AUTO” by “MODE” keypad,the
unit will select the appropriate operating mode for Cool,Heat or Dry based upon the
temperature difference between the actual and desired room temperature.The default
is 20oC,the default cooling temperature set point is 25oC.
motor to stop.
Note: This Function can only be activated by remote control, Please refer to remote
operating instruction for more detail information
heating temperature set point
FILTER:
This feature is a reminder to clean the Air Filter (See Air Filter) for more efficient
operation.The light will illuminate after 250 hours of operation.To reset after cleaning
the filter, press the “FILTER” button and the light will go off.
DEFROST:
Under heating mode, when there is “H1” on the LED display indicates the unit is under
defrost function. In this case, any set on main unit or remote controller will not be
carried out until the defrost is completed.
FAILURE INDICATOR DISPLAY:
Indicates a malfunction of the indoor room temperature sensor
Indicates a malfunction of the evaporator temperature sensor
Indicates a malfunction of the outdoor condenser temperature sensor
When one of the above malfunctions occurs, turn off the unit, and check for
any obstructions. Restart the unit, if the malfunction is still present, turn off
the unit and unplug the power cord. Contact the manufacturer or its service
agents or a similar qualified person for service.
'
' 
'
' 
'
' 
8

LIGHT:
Turn the unit LED light on or off only.
ENERGY SAVER:
Activate the “ENERGY SAVER” mode.
CLOCK:
Press this button to set clock.
CLOCK SWING
TIMER ON TIMER OFF
ENERGY
SAVER SLEEP
LIGHT
FAN ON OFF MODE