before using for the first
time
1Remove all packaging.
2Wash the parts: see ‘cleaning’.
key
blender
filler cap
lid
jug
sealing ring
blade unit
pulse control
speed control
power unit
cord storage
mill (if supplied)
blade unit
sealing ring
jar
sprinkler lid
to use your blender
1Fit the sealing ring into the blade
unit.
2Screw the jug onto the blade unit.
3Put your ingredients into the jug.
4Put the filler cap in the lid, then
turn.
5Screw the lid onto the jug so that
the thumb tab is over the handle.
(To unscrew the lid, push the
thumb tab .)
6Place the blender onto the power
unit and turn to lock .
7Select a speed.
●Use speed 1 for lighter blending
eg. batters, milkshakes and
scrambled eggs.
●Use speed 2 for soups, sauces,
pâtés and mayonnaise.
OR
●Use the pulse control to operate
the motor in a start/stop action.
The pulse control operates the
motor and keeps it running for as
long as the lever is held down -
this will allow you to control the
texture of various foods eg. pâtés.
Important
blender and mill
●To ensure long life of your blender,
never run it for longer than 60
seconds or the mill for longer than
30. Switch off as soon as you’ve
got the right consistency.
●Don’t process spices – they may
damage the plastic.
●The machine won’t work if the
blender or mill is fitted incorrectly.
blender only
●Don’t put dry ingredients into the
blender before switching on. If
necessary, cut them into pieces;
remove the filler cap; then, with the
machine running, drop them
through one by one. Keep your
hand over the opening. Empty
regularly.
●Don’t use the blender as a storage
container. Keep it empty before
and after use.
●Never blend more than 11⁄2litres
(2 pts 12 fl.oz) – less for frothy
liquids like milk shakes.
mill only
Use for dry ingredients only.
hints
●When making mayonnaise, put all
the ingredients, except the oil, into
the blender. Then, with the
machine running, pour the oil into
the filler cap and let it run through.
●Thick mixtures, eg pâtés and dips,
may need scraping down. If it’s
difficult to process, add more
liquid.
●When crushing ice, add 15ml
(1 tbsp) water to 6 ice cubes.
Operate the blender in short
bursts.
Use your blender for soups,
sauces, drinks, pâtés, mayonnaise,
dressings etc. Use your mill (if
supplied) for milling herbs, nuts
and coffee beans.
safety
●Liquids should be allowed to cool
to room temperature before
blending.
●Switch off and unplug:
●●before fitting or removing parts
●●after use
●●before cleaning.
●Keep hands and utensils out of the
blender when it’s on the power
unit.
●Don’t touch the sharp blades.
●Never use a damaged machine.
Get it checked or repaired: see
‘service and customer care’.
●Never use an unauthorised
attachment.
●Never leave the machine on
unattended.
●When removing the blender or mill
from the power unit:
●●wait until the blades have
completely stopped;
●●don’t accidentally unscrew the
jug or jar from the blade unit.
●Smoothie recipes - never blend
frozen ingredients that have
formed a solid mass during
freezing, break it up before adding
to the goblet.
●Misuse of your blender can result
in injury.
●This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of
the appliance by a person
responsible for their safety.
●Children should be supervised to
ensure that they do not play with
the appliance.
●Only use the appliance for its
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper
use, or failure to comply with these
instructions.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the machine.
Important – UK only
●The wires in the cord are coloured
as follows:
Blue = Neutral, Brown = Live.
●The appliance must be protected
by a 3A approved (BS1362) fuse.
Note:
●For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
●If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is
inadvertently inserted into a 13A
socket outlet.
●This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
