before usin for the first time
1 Wrap any excess cord around the
bracket on the underside o the
powerbase .
2 Fill to ‘MAX’, boil, then pour the
water away. Repeat 2 to 3 times.
key
hinged lid
lid release catch
on/o switch with indicator light
360° powerbase
cord wrap
water level windows
ilter
to use your kettle
1 Fill the kettle through either the
spout or lid. Open the lid by pulling
the lid release catch back. Then
pull the lid back. The water level
must be between ‘MAX’ and 1 cup
(250mls).
GBe economical: do not boil more
water than you need.
GTo improve the quality o your drinks
always use resh water.
GEmpty the kettle a ter each use.
2 Check the lid is closed.
3 Plug in and switch on. The indicator
light will come on.
4 Your kettle will boil and switch o
automatically. To re-boil, wait a ew
seconds - the on/o switch needs
time to reset.
Note - To interrupt the boilin
ensure that the switch is in
the off position before
removin from the powerbase.
GIf you experience problems
with your kettle switchin on
and off durin use or
switchin off before boilin ,
check that the flat element is
free from scale - see
“descalin ”.
GYour kettle is itted with a ilter to
hold back limescale particles.
GI you ind drops o water under your
kettle, don’t worry - it is just
condensation.
boil-dry protection
GI you switch on with too little water,
your kettle will cut out automatically.
Switch o , remove rom the
powerbase and let it cool down
be ore re- illing. When it has cooled
down, the switch will reset itsel .
care and cleaning
GBe ore cleaning, unplug your kettle
and let it cool down.
the outside and powerbase
GWipe with a damp cloth, then dry.
Do not use abrasives - they will
scratch the plastic sur aces.
the inside
GEven though your kettle comes with
a ilter, you still need to clean the
inside (and the ilter) regularly.
the filter
1 Open the lid by pulling the lid release
catch back. Then pull the lid
back.
2 Gently li t out the ilter .
3either rinse under the tap or use a
so t brush.
or when descaling your kettle, drop
the ilter in too. Rinse thoroughly.
4 To re- it the ilter, slide it in until
secure .
5 Close and lock the lid by pressing
the lid down.
descalin
GRegular descaling o the lat element
will improve the per ormance o your
kettle. I the kettle is not descaled
regularly the build up o limescale
may result in the ollowing:
Gproblems may be experienced
with the kettle switching on and
o during use or switching o
be ore boiling.
Gthe kettle may take longer to boil.
Gthe lat element may be damaged.
Please note: Failure to descale your
kettle may invalidate your guarantee.
GWhen limescale starts to build up on
the heating element, buy a suitable
descaler and descale your kettle.
A ter descaling, boil with resh water
several times and discard. Clean any
descaler o the kettle - it can
damage the parts.
4