Kenwood NEXEDGE NX-210 User manual

DIGITAL – CONVENTIONAL MODE
•64 Radio Access umbers (RA )
•Individual & Group Selective Call
•Mixed FM/Digital Operation
•Conventional IP etworks
•Site Roaming
DIGITAL – TRUNKING MODE
•Individual Private Call
•Group Call & Broadcast Call
•Transmission Trunked Mode2
•Message Trunked Mode2
•Call Queuing with Priority2
•Late Entry (UID & GID)2
•4 Priority Monitor ID’s2
•Remote Group Add1
•Failsoft Mode
MULTI-SITE IP NETWORKS
COMPATIBLE
•60,000 GIDs / UIDs
•Wide Area Group Call
•Auto Roaming Registration
•Group Registration
SCAN
•Single Zone / Multi-Zone / List Scan
•Dual Priority Scan (Conventional)
GENERAL FEATURES
• 5 W (136-174 MHz) Model
• 512 CH-GID / 128 Zones
• 12-Key Keypad Model
• 14 Character Alphanumeric Aliases
• Backlit Dot Matrix LCD
• Function/Status LCD Icons
• Multi-Language Display
• Date & 12/24 Hour Time Clock
• Transmit/Busy/Call Alert/Warn LED
• On/Off Volume Knob
• 6 Front PF & Menu Keys
• 2 Side PF Keys
• Emergency/AUX Key
• 500 mW Speaker Audio
• KMC-47GPS Speaker Mic Option
• KPG-111D Windows®FPU
• Flash Firmware Upgrading
• MIL-STD-810 C/D/E/F/G
• MIL-STD “Driven-Rain”
• IP54/55 Water & Dust Intrusion
• PC Serial Interface
• SDM Manual Input1
• Transparent Data Mode1
• VGS-1 Voice Guide/Voice & GPS Data
Storage Option
DIGITAL – GENERAL
• XD ®Digital Air Interface
• AMBE+2™VOCODER
• 6.25 & 12.5 kHz Channels
• Over-the-Air Alias
• Over-the-Air Programming*
• Paging Call
• Emergency Call
• All Group Call
• Status Messaging1
• Remote Stun/Kill1
• Remote Check1
• Short & Long Data Messages1
• GPS Location with Voice1
• XD ®Scrambler Included
• DES Encryption Module Option
• AES & DES Encryption Module Option
• AES/DES Software Key Loader Option
NX-210
NEXEDGE®VHF Digital & Analog Porta le Radio
http://nexedge.kenwood.com

■KNB-31A
i-Cd Battery
(1700mAh)
■KNB-32N
i-MH Battery
(2500mAh)
■KNB-33L
Li-ion Battery
(2000mAh)
■KNB-43L
Li-Polymer Battery
(3300mAh)
■KNB-49PL
Primary Lithium Battery
(4500mAh)
■KBP-6
Alkaline Battery Case
■KSC-32
Rapid Rate Charger
for i-Cd/ i-MH/Li-ion
■KSC-326
Rapid Rate Six Unit Charger
for i-Cd/ i-MH/Li-ion
■KVC-15
Rapid Rate Vehicular
Charger Adapter for KSC-32
■KVC-18
D.C. Vehicular Charger
■KRA-22
VHF Helical Antenna
■KRA-26
VHF Whip Antenna
■KRA-16
VHF Stubby Antenna
■KRA-25
VHF High Gain Antenna
■KMC-41M
MIL-STD & IP 54/55
Speaker Microphone
■KMC-47GPS
GPS Speaker Microphone
■KEP-1
Heavy Duty Earphone
■KHS-11BL
2-Wire Mini Lapel
Mic. with Earphone
■KHS-12BL
3-Wire Mini Lapel
Mic. with Earphone
■KHS-14
Lightweight Single
Muff Headset
■KHS-15-BH
Over-the-Head
Heavy Duty Headset
■KHS-15-OH
Behind-the Head
Heavy Duty Headset
■VGS-1
Voice Guide
& Storage Unit
■KBH-11
Belt Clip (2.5")
■KLH-154K2
Heavy Duty Leather
Carrying Case
All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete list of all accessories and options.
Options
NX-210
GENE AL
Frequency ange 136-174 MHz
Number of Channels 512
Zones 128
Max. Channels per Zone 250
Channel Spacing Analog/Digital 12.5 / 15 / 25 / 30 kHz (6.25 / 12.5 kHz)
Operating Voltage 7.5V DC ± 20%
Battery Life (5-5-90) with KNB-31A More than 10 hours
with KNB-32N More than 14 hours
with KNB-33L More than 11 hours
Battery Life (10-10-80) with KNB-31A More than 6 hours
with KNB-32N More than 9 hours
with KNB-33L More than 7 hours
Operating Temperature ange -22˚ F to +140˚ F (-30˚ C to +60˚ C)
Frequency Stability ± 2.0 ppm
Antenna Impedance 50 
Dimensions (W x H x D) adio only 2.28 x 5.46 x 0.88 in (58 x 138.8 x 22.4 mm)
Projections not included with KNB-31A 2.28 x 5.46 x 1.60 in (58 x 138.8 x 40.7 mm)
with KNB-32N 2.28 x 5.46 x 1.60 in (58 x 138.8 x 40.7 mm)
with KNB-33L 2.28 x 5.46 x 1.35 in (58 x 138.8 x 34.2 mm)
Weight (net) adio only 9.52 oz (270 g)
with KNB-31A 18.52 oz (525 g)
with KNB-32N 19.58 oz (555 g)
with KNB-33L 13.93 oz (395 g)
FCC ID ALH423500
IC Certification 282D-423500
NX-210
ECEIVE
Sensitivity Digital @ 6.25kHz (3% BE ) 0.20 µV
Digital @ 12.5kHz (3% BE ) 0.25 µV
Analog (12 dB SINAD) 0.25 µV
Selectivity Analog @ 25 kHz 72 dB
Analog @ 12.5 kHz 65 dB
Intermodulation Distortion Analog 70 dB (±50,100 kHz)
Spurious esponse Analog 70 dB
Audio Distortion Less than 3%
Audio Output 500 m / 8 
T ANSMITTE
F Power Output 5 / 1
Spurious esponse 70 dB
FM Hum & Noise Analog @ 25 kHz 45 dB
Analog @ 12.5 kHz 40 dB
Audio Distortion Less than 3%
Modulation 16K0F3E, 11K0F3E, 8K30F1E,
8K30F1D, 8K30F7 , 4K00F1E,
4K00F1D, 4K00F7 , 4K00F2D
Analog measurements made per TIA/EIA 603 and specifications shown are typical.
Specifications are subject to change without notice, due to advancements in technology.
Main Specifications
KNB-33L
FleetSync®is a registered trademark of JVC KE WOOD Corporation.
LTR®is a registered trademark of Transcrypt International.
AMBE+2TMis a trademark of Digital Voice Systems Inc.
Windows®is a registered trademark of Microsoft Corporation.
XD ®is a registered trademark of JVC KE WOOD Corporation and Icom Inc.
EXEDGE®is a registered trademark of JVC KE WOOD Corporation.
Foot otes from fro t:
1Requires compatible PC software
applicatio or co sole.
2These tru ked features are primarily
system programmi g a d operatio al
depe de t. Priority Mo itor also
requires NX subscriber setti gs.
KBP-6
MIL Standard MIL 810C MIL 810D MIL 810E MIL 810F MIL 810G
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II 500.5/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II 501.5/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II 502.5/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II 503.5/Procedure I
Solar adiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I 505.5/Procedure I
ain 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III 506.5/Procedure I, III
Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4 507.5/Procedure II
Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4 509.5
Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III 510.5/Procedure I
Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I 514.6/Procedure I
Shock 516.2/Procedure I, II, V 516.3/Procedure I, IV 516.4/Procedure I, IV 516.5/Procedure I, IV 516.6/Procedure I, IV
International Protection Standard
Dust & Water Protection IP54/55
Applicable MIL-STD & IP
*To meet MIL810 a d IP grade, the 2-pi co ector has to be co ected.
ADS#56211 Printed in USA