Kenwood TK-7180 User manual

TK-7180(H)/8180(H)
VHF/UHF FM Mobile Radios
•DB-25 Accessory Connenctor5
•9 Programmable AUX I/Os5
•2 Programmable AUX Outputs5
•Ignition Sense6
•Public Address / Horn Alert Option7
•MIL-Spec Standard Mic
•MIL-Spec 12-Key DTMF Mic Option
•Windows®Programming & Tuning8
•Windows®Firmware Uploading8
•Front Panel Test / Tune
•Cloning
•MIL-STD-810 C/D/E/F
•MIL-STD “Driven-Rain”9
•IP-54/55 Water & Dust Intrusion9
CONVENTIONAL ZONES
•512 Channels / 128 Zones10
•T / D T
•Two-Tone Decode11
•Single / Two-Tone Encode11
•Operator Selectable Tone11
•Dual Priority Scan
•Single & Multi-Zone Scan
•List Scan
TRUNKED ZONES
•512 GID / 128 Zones10
•Kenwood LTR®Features12
FleetSync®
•FleetSync®or FleetSync®II13
•PTT ID Digital ANI
•Selective Call & Group Call
•Status Messaging
•Emergency Status
•Caller ID Display
•Short & Long Text Messages14
•Power On/Off Status Messages
•Input / Output Status Messages
•FleetSync®GPS Ready15
•Send GPS PF Key15
•PTT ID & Emergency GPS Reporting15
•Status Message Block GPS Reporting15
•Ignition On/Off GPS Reporting6, 15
•VGS-1 GPS Data Storage15,16
•PC Serial Interface
MDC-120017
•PTT ID Digital ANI
•Caller ID Display
•Emergency Status
•Radio Check
•Radio Inhibit
GENERAL FEATURES
•30/50 W (136-174 MHz)
•30/45 W (450-520, 400-470 MHz)
•Conventional & LTR®Zones
•MPT1327 Trunking Option
•Remote Control Head Option1
•12 Character Alphanumeric Aliases
•Backlit Dot Matrix LCD
•3-Digit Sub-Display
•Function / Status LCD Icons
•RSSI Indicator
•Date & 12/24 Hour Time Clock
•Transmit / Busy / Call Alert / Warn LED
•6 Backlit PF Keys
•Emergency / AUX Key
•Enhanced Kenwood Audio
•Front Panel Speaker
•Companded Audio
•Voice Inversion Scrambler Built-in
•Easy Option Port
•Encryption / ANI Board Control
•VGS-1 Voice Guide / Storage Option
•Emergency Call Features
•DTMF Encode / Decode2
•Special Alert Tone Patterns3
•Call Key4
•Time Out Timer
•Busy Channel Lockout
•Timed Power Off

ADS#30212 Printed in USA
■KMC-35
Microphone
(supplied microphone)
■KMC-36
Keypad Microphone
■KMC-9C
Control Station
Desktop Microphone
■KRK-10
Control Head
Remote Kit (23ft/7m)
■KCT-46
Ignition Sense Cable
■KCT-40
Radio Interface Cable
(for KDS-100, KGP-2A/2B)
■KCT-23M
DC Cable (Dash
mount / 10 feet)
■KCT-23M3
DC Cable (Remote
mount / 23 feet)
■KAP-2
Horn Alert/Public
Address Relay Unit
■VG -1
oice Guide &
Storage Unit
■KE -3
External Speaker
■KE -5
External Speaker
(requires KAP-2)
■KMB-10
Key Lock Adapter
■KLF-2
Line Noise Filter
■KP -10A
DC Power Supply
■KP -15
DC Power Supply
■KD -100
Mobile Data Terminal
■KGP-2A/2B
GPS Receiver /
Modem Unit
(requires KCT-39 option)
All accessories and options may not be available in all markets.
Contact an authorized enwood dealer for details and complete list of all accessories and options.
Model TK-7180 TK-7180H TK-8180 TK-8180H
GENERAL
Frequency Range
Type 1 136~174 MHz 450~520 MHz 450~512 MHz
Type 2 – 400~470 MHz
Number of Channels*
Zone Max.128 per Radio
Ch/GID Max.250 per Zones
(Max.512 [Conv.Ch’s +GID’s] total per Radio)
Channel Spacing
Wide 25 kHz, 30 kHz 25 kHz
Narrow 12.5 kHz, 15 kHz 12.5 kHz
Operating Voltage 13.6 V DC±15 %
Current Drain
Standby 0.4 A 0.4 A 0.4 A 0.4 A
Receive 1.0 A 1.0 A 1.0 A 1.0 A
Transmit 9.0 A 13.0 A 9.0 A 13.0 A
Duty Cycle Transmit: 20 %
Operating Temperature Range -22 ºF ~ +140 ºF (-30 ºC ~ +60 ºC)
Frequency Stability ±0.00025 % (-22 ºF ~ +140 ºF)
Antenna Impedance 50 Ω
Channel Frequency Spread
Type 1 38 MHz 70 MHz
Type 2 – 70 MHz
Dimensions (W x H x D), 6-5/16” x 1-3/4” x 6-3/16”
Projections not included (160 mm x 45 mm x 157 mm)
Weight (net) 3.3 lbs. (1.5 kg)
FCC ID
Type 1 4437303110 4437303210 4437313110 4437313210
Type 2 –– 4437313120 4437313220
IC Certification
Type 1 282F-37303110
–––
Type 2 – – 282F-37313120 –
Model TK-7180 TK-7180H TK-8180 TK-8180H
RECEIVER (Measurements made per EIA/TIA-603)
Sensitivity (12dB SINAD)
Wide 0.25 µV
Narrow 0.28 µV
Selectivity**
Wide 80 dB 80 dB
Narrow 70 dB 67 dB
Intermodulation Distortion
Wide/Narrow 75 dB (±50, 100 kHz)
Spurious Response** 90 dB 85 dB
Audio Output
(4 Ω Impedance) 4 W with less than 5 % distortion
TRAN MITTER (Measurements made per EIA/TIA-603)
RF Output Power
Type 1 30 to 1 W 50 to 10 W 30 to 1 W 45 to 10 W
(490 -520 MHz:25 to 1 W) (490 -512 MHz:40 to 10 W)
Type 2 –– 30 to 1 W 45 to 10 W
Spurious Response 70 dB
Type of Emission
Wide 16 0F3E
Narrow 11 0F3E
FM Hum & Noise
Wide 50 dB
Narrow 45 dB
Microphone Impedance 600 Ω
Audio Distortion
Wide/Narrow 3 %
tandard MIL 810C MIL 810D MIL 810E MIL 810F
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II
Temperature hock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II
olar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I
Rain 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III
Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4
alt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4
Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III
Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I
hock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, V
International Protection tandard
Dust & Water Protection P54: Radio itself
P54/55: Remote Head with R -10
*To meet above Mil810 and IP grade, weather proof microphone MC-35 or MC-36 has to be connected.
*Maximum capability depends on the number of programmed Zone and repeater channels.
** Typical specifications
Specifications are subject to change without
notice, due to advancements in technology.
Options
pecifications
Applicable MIL- TD & IP
footnotes from Front:
1R -10 remote control kit required.
2DTMF includes PTT ID, Emergency ANI, Manual Encode ( MC-36),
Auto-Dial (9 numbers) & Stun.
3Special Alert Tone Patterns operate for 2-Tone, DTMF,
FleetSync®selective call decode.
4Call ey: 6 keys max.; operates for 2-Tone, DTMF and
FleetSync status encode.
5DB-25 ACC supports 15 Remote Zone/CH/GID selections,
GP-2A/B ( CT-40 required), DS-100 ( CT-40 required), data
modem, MDT, interconnect.
6CT-46 ignition sense cable option required; plugs into mobile
ignition sense pig-tail cable.
7AP-2 required: Horn Alert operates for FleetSync®, 2-Tone or
DTMF selective call decode.
8PG-89D required: Windows®98/ NT/ 2000/ Me/XP compatible;
English/Spanish screen languages.
9MIL-STD “Driven-Rain” and IP-55 Water/Dust Intrusion apply
to remote control head only; IP54 applies to radio chassis.
10Conventional Zones: 512 Channels /128 Zones max. per radio;
250 CH max. per Zone Trunked Zones: 512 GID / 128 Zones
max. per radio; 250 GID max. per Zone.
11 Two-Tone Decode (4 sets x 4 pairs each); Single / Two-Tone
Encode (32 tones), Operator Selectable Tone (40 QT.DQT code pairs).
12 enwood LTR®Features include: GID Delete/Add, LTR®Talk
Around /Scan Revert Group Display, System Scan, Group Scan,
Auto Search.
13 FleetSync® & FleetSync®II are not compatible.
14 Short Text Messages are radio stored & LCD displayed; Long
Text Messages require a DS-100 and CT-40.
15 FleetSync®GPS features require an internal GPS board or
externally wired GPS receiver with NMEA TTL level serial data
output to the internal COM 1 or 2 set to "GPS".
16 Requires a VGS-1 option.
17
Either MDC-1200 or FleetSync®can be activated per radio.
FleetSync®is a registered trademark of JVC
ENWOOD Corporation in the United States
and/or other countries.
LTR®is a registered trademark of Transcrypt
International.
All other trademarks are property of their
respective owners.
GPS-2A
GPS-2B