Kenwood KNA-RCDV331 User manual

KNA-RCDV331
REMOTE CONTROL UNIT
INSTRUCTION MANUAL
TELECOMMANDE
MODE D’EMPLOI
FERNBEDIENUNG
BEDIENUNGSANLEITUNG
AFSTANDSBEDIENING
GEBRUIKSAANWIJZING
TELECOMANDO
ISTRUZIONI PER L’USO
UNIDAD DE CONTROL REMOTO
MANUAL DE INSTRUCCIONES
UNIDADE DE CONTROLO REMOTO
MANUAL DE INSTRUÇÕES
遥控器
使用说明书
© B64-4632-00/00 (W7)
B64-4632-0000KNA-RCDV331.indb1 09.11.1010:46:52AM

2 KNA-RCDV331
KNA-RCDV331
This unit cannot control the function that isn't included in the car audio.
¤
• Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could
result, if the Remote Controller falls down and gets wedged under the pedals while driving.
• Do not place the battery near an open flame or heat source. This may cause the battery to explode.
• Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause the battery to leak
fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician.
• Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a
physician.
• Do not set the remote on hot places such as on the dashboard.
Battery installation
Use two "AAA"/"R03"-size batteries.
Slide the cover while pressing downwards to
remove it as illustrated.
Insert the batteries with the +and -poles
aligned properly, following the illustration inside
the case.
⁄
• If the Remote Controller operates only over shorter
distances or does not operate at all, it is possible that
the batteries are depleted. In such instances, replace the
both batteries with new ones.
Remote Controller mode switch
The functions operated from the remote
controller differ depending on the position of the
mode switch.
DVD mode
Switch to this mode when playing
DVDs or CDs etc. with the player
integrated in this unit.
AUD mode
Switch to this mode when
controlling a selected source or a
CD changer etc.
NAVI mode
This is switched when controlling
Navigation unit.
TV mode
This is switched when controlling
TV.
⁄
• The position of the remote control mode switch is
indicated in the title of each mode, e.g., "(AUD mode)".
• When controlling a player that is not integrated in the
unit, select "AUD" mode.
B64-4632-0000KNA-RCDV331.indb2 09.11.1010:46:52AM

English 3
Common operations (AUD mode)
Source switching
Switches to the source to be played.
Volume control
Adjusts the volume.
Volume attenuator
Press the key once to lower the volume. Press again
to restore the previous volume.
Dual Zone
Switches the Dual Zone function ON and OFF.
Rear volume control
Adjusts volume at rear when the Dual Zone
function is ON.
V.SEL
Switch video
Switches the video each time it is pressed.
Display angle (DDX)
Switches the display angle each time it is pressed.
OPEN (KVT)
Opens or closes the monitor each time it is pressed.
Cursor key
Moves the cursor when displaying menu.
ENTER
Enters options.
Hands-free communication
When a call comes in, it answers the call.
Function
Switches the function screen.
MODE
Switches the screen mode.
Screen mode changes each time you press this key.
B64-4632-0000KNA-RCDV331.indb3 09.11.1010:46:52AM

4 KNA-RCDV331
DVD/DVD Audio/VCD/CD/Audio files
(DVD mode)
Folder search
Selects the folder to be played.
Track search and file search
Selects the track or file to be played.
Play/Pause
Pauses the track.
Press again to resume playing.
Stop
Memorizes the last point where the disc stopped.
When pressed again, the last point is deleted.
Direct search
Pressing this button switches the features that can
be searched directly.
DVD
Title number
Chapter number
Play time
Item number*
Cancel
* You may not be able to use this function with some discs
or scenes.
Radio (AUD mode)
Band switching
Switches to bands received by the unit.
Station selection
Switches to broadcast stations received by the unit.
Seek mode switching
Switches the Seek mode (AUTO1, AUTO2, MANU).
Direct tuning
After pressing this key, use the keypad to specify
the broadcast station you wish to receive.
Example: 92.1MHz (FM)
9 WXYZ
2ABC
1
➜or
Example: 810kHz (AM)
8TUV
1
0
➜or
Numeric keypad
• To use preset tuning, press the number of a
programmed broadcast station. (
1
–
6 MNO )
• Press the direct tuning key first, then specify the
frequency of the station to receive.
KNA-RCDV331
B64-4632-0000KNA-RCDV331.indb4 09.11.1010:46:54AM

English 5
DVD Audio
Group number
Track number
Item number*
Cancel
* You may not be able to use this function with some discs
or scenes.
CD
Track number
Play time
Cancel
Audio files
Folder number
File number
Cancel
VCD 1.X, VCD 2.X (PBC OFF)
Track number
Cancel
VCD 2.X (PBC ON)
Scene number
Number
Cancel
Once you have switched to the direct search
feature, specify the search number from the
numeric keypad, and then press [ENTER] key.
Numeric keypad
• Specify the number to search in direct search.
• Press
1
2ABC
to fast forward/backward.
Switches the fast forward/backward speed each
time you press this key.
• Press
4GHI
5JKL
to slow forward/backward.
Switches the slow playback speed each time you
press this key.
DVD Top Menu
Returns to the DVD top menu.
DVD Menu
Displays the DVD menu.
Turns the playback control on or off while playing
VCD.
Subtitle
Switches the subtitle language.
Zoom
Switches the zoom ratio each time you press this
key.
Picture Angle
Switches the picture angle each time you press this
key.
AUDIO
Switch Voice Language
Switches the voice language each time you press
this key.
B64-4632-0000KNA-RCDV331.indb5 09.11.1010:46:56AM

6 KNA-RCDV331
KNA-RCDV331
iPod (AUD mode)
Music/Video search
Selects the music/video to be played.
Play/Pause
Pauses the music/video.
Press again to resume playing.
USB (AUD mode)
Folder search
Selects the folder to be played.
File search
Selects the file to be played.
Play/Pause
Pauses the file.
Press again to resume playing.
TV (TV mode)
Switching Band/Video
Switches between the station of the TV band to
receive and video input.
Channel Selection
Selects the TV channel to be received.
Direct tuning
(Function of NTSC TV type only)
Press this key first, and then specify the station to
receive with the numeric keypad.
Example: In case of Channel 6 (2-digit)
0
6 MNO
Numeric keypad
• The number of the memorized station is
selected. (
1
–
6 MNO )
• Press the direct tuning key first, then specify the
channel of the station to receive.
B64-4632-0000KNA-RCDV331.indb6 09.11.1010:46:57AM

English 7
NAVI (NAVI mode)
Cursor key
Scrolls the map, or moves the cursor.
ENTER
Performs the selected function.
Zoom
Zooms in or out the navigation map.
MENU
Displays Main menu.
CANCEL
Displays previous screen.
POSITION
Displays the current position.
ROUTEM
Displays Route Option menu.
VIEW
Switches between 2D and 3D map displays.
VOICE
Plays Voice guidance.
MAP DIR
Switches between the heading up navigation and
north up navigation map displays.
Hands-free communication
When a call comes in, it answers the call.
B64-4632-0000KNA-RCDV331.indb7 09.11.1010:46:58AM

U.S.A. only
FCC WARNING
This equipment may generate or use radio
frequency energy. Changes or modifications to
this equipment may cause harmful interference
unless the modifications are expressly approved
in the instruction manual. The user could lose
the authority to operate this equipment if an
unauthorized change or modification is made.
FCC NOTE
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment may cause harmful
interference to radio communications, if it is
not installed and used in accordance with the
instructions. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
B64-4632-0000KNA-RCDV331.indb53 09.11.1010:48:05AM