Kenwood CRW-NV701 User manual

CRW-NV701
CENTER SPEAKER ,SURROUND SPEAKER ,SUBWOOFER SYSTEM
CRW-NV701
SERVICE MANUAL
2000-6/B51-5643-00 (Z/K)2474
EXTERNAL VIEW :SURROUND SPEAKER
SPECIFICATIONS
Grille assy
(B06-1475-08):L
(B06-1476-08):R
Fullrange
(T07-0489-05)
Push terminal
(E21-0297-05)
Binding head
tapping screw
(N44-3514-45)x4
Enclosure ..........................................................................................Acoustic air suspension type
Full range .............................................................................................100 mm, (4 in) cone type
Impedance ................................................................................................................................6 Ω
Maximum input level............................................................................................................50 W
Dimensions ..................................................................................................W: 177mm (6-15/16")
H: 150mm (5-7/8")
D: 166mm (6-9/16")
Net Weight .................................................................................................1.3 kg (2.87 lb / piece)
Note:
KENWOOD follows a policy of continuous advancements in development. For this
reason specifications may be changed without notice.
Mounting hardware
(J21-8824-05)
Binding head
tapping screw
(N44-3014-45)x2
Dressing panel
(A21-3328-08):L
(A21-3329-08):R
Dressing panel
(A21-3326-08):L
(A21-3327-08):R
Binding head
tapping screw
(N44-3012-46)x4
For panel assy
How to remove the speaker unit
1. Remove the front dressing panel ass’y before replace the speaker.(Insert the screw driver into
the gaps of the silver panel from bottom side.)
2. You can disassemble the front dressing panel ass’y if removing the screws from its back side.
DISASSEMBLY FOR REPAIR

2
CRW-NV701
EXTERNAL VIEW/SPECIFICATIONS
CRW-NV701
SPECIFICATIONS
Grille assy
(B06-1474-08)
Push terminal
(E21-0297-05)
Binding head
tapping screw
(N44-3514-45)x8
Full range
(T07-0488-05)x2
Enclosure ......................................................Acoustic air suspension Magnetically shielded type
Full range ..........................................................................................80 mm, (3 in) cone type x2
Impedance ................................................................................................................................6 Ω
Maximum input level............................................................................................................50 W
Dimensions ...................................................................................................W: 280mm (11")
H: 130mm (5-1/8")
D: 166mm (6-9/16")
Net Weight .................................................................................................2.3 kg (5.07 lb / piece)
Note:
KENWOOD follows a policy of continuous advancements in development. For this
reason specifications may be changed without notice.
CENTER SPEAKER: MECHANICAL 2-WAY SPEAKER SYSTEM
SUB WOOFER: WOOFER SPEAKER SYSTEM
Enclosure ..............................................................................................................Bass-reflex type
Woofer ............................................................................................160 mm, (6-1/2 in) cone type
Impedance ................................................................................................................................6 Ω
Maximum input level............................................................................................................50 W
Dimensions ..................................................................................................W: 280mm (11")
H: 200mm (7-7/8")
D: 345mm (13-9/16")
Net Weight ...............................................................................................5.6 kg (12.35 lb / piece)
Note:
KENWOOD follows a policy of continuous advancements in development. For this
reason specifications may be changed without notice.
SPECIFICATIONS
CRW-NV701
Grille assy
(B06-1477-08)
Woofer
(T10-0957-05)
Push terminal
(E21-0297-05)
Binding head
tapping screw
(N44-4020-45)x4
Dressing panel
(A21-3330-08)
Dressing panel
(A21-3325-08)
Dressing panel
(A21-3324-08)
Binding head
tapping screw
(N44-3012-46)x6
For panel assy

3
DIVIDING NETWORK UNIT
CRW-NV701
+
-
-
+
-
+
RED
B LK
RED
B LK
INPUT
; #. 205 FASTON
; #. 110 FASTON
INPUT
RED
B LK
+
-
; #. 205 FASTON
; #. 110 FASTON
+
-
SURROUND SPEAKER
INPUT
RED
B LK
+
-
; #. 205 FASTON
; #. 110 FASTON
+
-
CENTER SPEAKER
SUB WOOFER
SP2
SP2
SP3
SP1

4
PARTS LIST
- * E30-5858-05 SPEAKER CORD
- * E30-5859-05 SPEAKER CORD
- * H10-8165-08 POLYSTYRENE FOAMED FIXTURE
- * H10-8166-08 POLYSTYRENE FOAMED FIXTURE
- * H10-8167-08 POLYSTYRENE FOAMED FIXTURE
- * H21-1352-08 PROTECTION SHEET
- * H51-1503-08 ITEM CARTON CASE EG
- * H51-1504-08 ITEM CARTON CASE M
- * H51-1509-08 ITEM CARTON CASE KXY
X20-259
- * A21-3324-08 DRESSING PANEL
- * A21-3325-08 DRESSING PANEL (CLEAR BLUE)
- * B06-1474-08 GRILLE ASSY
- * E21-0297-05 PUSH TERMINAL
SP2 * T07-0488-05 FULL RANGE
X20-260
- * A21-3326-08 DRESSING PANEL (L)
- * A21-3327-08 DRESSING PANEL (R)
- * A21-3328-08 DRESSING PANEL (L) (CLEAR BLUE)
- * A21-3329-08 DRESSING PANEL (R) (CLEAR BLUE)
- * B06-1475-08 GRILLE ASSY (L)
- * B06-1476-08 GRILLE ASSY (R)
- * E21-0297-05 PUSH TERMINAL
- * J21-8824-05 MOUNTING HARDWARE
SP3 * T07-0489-05 FULL RANGE
X20-261
- * A21-3330-08 DRESSING PANEL
- * B06-1477-08 GRILLE ASSY
- * E21-0297-05 PUSH TERMINAL
SP1 * T10-0957-05 WOOFER
PARTS LIST
Ref. No. Address
New
Parts
Parts No. Description Desti-
nation
Re-
marks
∗New Parts
Parts without Parts No. are not supplied.
Les articles non mentionnes dans le Parts No. ne sont pas fournis.
Teile ohne Parts No. werden nicht geliefert.
CRW-NV701
CRW-NV701
L: Scandinavia K: USA P: Canada R: Mexico C: China I: Malaysia
Y: PX(For East Hawaii) T: England E: Europe G: Germany V: China(Shanghai)
Y: AAFES(Europe) X: Australia Q: Russia H: Korea M: Other Areas indicates safety critical components.
CENTER SPEAKER(X20-2590-10)
SURROUND SPEAKER(X20-2600-10)
SUB WOOFER(X20-2610-10)