KEPO KPM-G1201A9-K9096 User manual

Checkedby
Customer:QUARTZ- 1
AppliedTo:
ProductName:MagneticTransducer
ModelName: KPM-G1201A9-K9096
DrawingNo.: OEM9096R
CompliancewithROHS( 品符合ROHS指令)
SPECIFICATION
Signatureof KEPO
Approvedby
Signatureof Approval
Date
Issuedby
宁波凯普电子有限公司
NingboKepoElectronics Co.,Ltd.
受控
2012. 05. 11

DrawingNo.
RevisionNo.
Page
CONTENTS
ModelNo.:
Ningbo Kepo ElectronicsCo.,Ltd. http://www.chinaacoustic.com
1.Scope
范围
2. General
概要
3. MaximumRating
额定极限条件
4.ElectricalCharacteristics
电性能
5. Measuring Method
测试方法
6.PhysicalCharacteristics
机械性能
7. EnvironmentalCharacteristics
环境性能
8. Dimensions
尺寸
9. Packaging Standard
包装标准
10. Cautions
警告
11. CautionsforUse
注意事项
12.Revision
履历表
2/9
1.0
OEM9096R
Specification forMagneticTransducer
KPM-G1201A9-K9096

Ningbo Kepo ElectronicsCo.,Ltd. http://www.chinaacoustic.com
2.1Out-Diameter: 12mm
外径： 12mm
2.2Height : 9.0mm
高度： 9.0mm
2.3Weight: 2g.
重量： 2克
2.4CaseMaterial/Color: PBT/Black
壳体材质/颜色:PBT/黑
2. 概要 General
Thisproductspecification isappliedtothe MagneticTransducerin alarm
systems.Pleasecontactuswhenusingthisproductforanyotherapplications than
describedintheabove.
规格书适用于电磁式声响器，通常它用在系统中做报警或提示的声响器用，如果将该
品用于其它领域，请与我们取得联系。
1. 范围 Scope
ModelNo.:
Page
RevisionNo.
DrawingNo.
3/9
3. 额定极限条件 MaximumRating
储存温度范围
StorageTemperatureRange
工作温度范围
OperatingTemperatureRange
3.3
3.2
3.1
项目Item 规格Specification
-30 ～+80℃
-20 ～+70℃
额定电压
RatedVoltage 1.5V
3.4 工作电压
OperatingVoltage 1～2V
Specification forMagneticTransducer
KPM-G1201A9-K9096 OEM9096R
1.0

Ningbo Kepo ElectronicsCo.,Ltd. http://www.chinaacoustic.com
ModelNo.:
Page
RevisionNo.
DrawingNo.
4/9
Partshallbemeasuredunderacondition(Temperature:+5to+35 ℃,Humidity:45to
85%R.H.)unlessthestandardcondition(Temperature:+25 ±3℃,Humidity:60±10
%R.H.)isregulatedmeasure.
温度+25±3℃，湿度60±10%R.H.标准测试状态,在没有疑问的场合,可以在温度+5～+35
℃,湿度45～85%R.H.的范围内测试.
5.1MeasurementBlockDiagram
5.2测试环境 Measuring Condition
5.测试方法 Measuring Method
4.电性能 Electrical Characteristics
4.2
4.1
项目Item 规格Specification
Max.RatedCurrent
额定电流10mA/1.5V
ResonantFrequency
谐掁频率 2048Hz
Min.SoundPressureLevel
最小声压80dB/1.5V/2048Hz/10cm
4.3
4.5
4.4 45±5Ω
80Ω
CoilResistance
直流阻抗
CoilImpedance
交流阻抗
Specification forMagneticTransducer
KPM-G1201A9-K9096 OEM9096R
1.0
1KΩ/0. 25W(β=200～250)

Ningbo Kepo ElectronicsCo.,Ltd. http://www.chinaacoustic.com
ModelNo.:
Page
RevisionNo.
DrawingNo.
5/9
The force 10 secondsof 9.8Nisapplied to
eachterminalinaxialdirection.
分别在每个插针的轴向施加9.8牛顿的静荷
重10秒.
先将声响器的插针浸入松香液5秒钟,然后
浸入+260±5℃熔融的锡槽中3±0.5秒.
Leadterminalsareimmersedinrosin for5
secondsandthenimmersedinsolderbath
of +260±5℃for3±0.5seconds.
Lead terminal areimmersed up to1.5mm from
sounder'sbodyinsolderbathof +300±5℃for 3±0.5
secondsor±260±5℃for10±1seconds, and then
sounder shall be measured after being placed innatural
condition for 4hours.
将声响器的插针插入(插至距声响器壳体
1.5mm处为止)+300±5℃的焊锡槽3±0.5秒
或+260±5℃的焊锡槽10±1秒,然后在常温中
放置4小时后,测试声响器.
Terminal
StrengthPulling
插针强度
6.5
Solderability
可焊性
6.4
SolderingHeat
Resistance
耐焊接性
6.3
Novisible
damage and
cuttingoff
插针没有断开和
可见的损伤
90% min.lead
terminalsshall be
wetwithsolder.
(Excepttheedge
ofterminal)
插针表面90%以
上被焊锡润湿.(插
针的段面 外)
峰值加速度490m/s2
, 正向方波,XYZ三个
方向各3次冲击实验后,测试声响器.
Soundershallbemeasuredafterbeingapplied
shock(490m/s2 )foreachthree mutually
perpendiculardirectionstoeachof 3times by half
squarewave.
Sounder shall be measured after being applied
vibration of amplitude of 1.5mm with10 to30Hzband of
vibration frequency toeachof 3perpendicular directions
for 2hours.
振动频率 10～30Hz,1.5mm 全振幅,XYZ
三个方向各2小时试验后,测试声响器.
实验条件
TestCondition
6.机械性能 PhysicalCharacteristics
6.2
6.1
耐振动性
Vibration
Resistant
实验项目
Item
耐冲击性
Shock
实验后规格
Specification
符合表1的要求
Themeasured
valueshall meet
Table1.
Specification forMagneticTransducer
KPM-G1201A9-K9096 OEM9096R
1.0

Ningbo Kepo ElectronicsCo.,Ltd. http://www.chinaacoustic.com
ModelNo.:
Page
RevisionNo.
DrawingNo.
6/9
表1Table 1
7.环境性能 EnvironmentalCharacteristics
声压级
SoundPressureLevel
项目
Item
试验后变化量
Specificationafter test
初始值±10dB
InitialValue±10dB
将品置于70±2 ℃试验箱中，先工作1小时，然后将品置于
-20±2 ℃试验箱中，再工作1小时，经过6个循环后，在正常大气
压条件下恢复1小时，进行测量
将品置于湿度为90～95%R.H，温度为 ±2℃试验箱中2
小时，然后在正常大气压条件下恢复2小时后，进行测量
将品置于-20±2 试验箱中，先工作 2小时，再放置16小时，
然后在正常大气压条件下恢复2小时后，进行测量
将品置于+70±2 试验箱中，先工作 2小时，然后在正常
大气压条件下恢复2小时后，进行测量
+70
-20
Afterbeing woked in achamberwith+70±2for 2h and
thenbeingplacedinnaturalcondition for2h,soundershall be
measured.
Firstbeingworkedinachamberwith -20±2for 2h and
thenbeingplacedinachamberwith -20±2 ℃for16h,finally
beingplacedinnaturalcondtionfor2h,soundershall be
measured.
Afterbeingplaced in achamberwith90to95%R.H.at+40±2
for2handthenbeingplacedinnatural condition for2h,
soundershallbemeasured.
Afterbeingworkedinachamberat+70±2for 1hour,
thensoundershallbeplacedinachamberat-20±2for 1
hour(1cycleisthebelowdiagram).
After6abovecycles,soundershallbemeasuredafterbeing
placedinnaturalcondition for1hour.
低温试验
4
3
ThermalShock
Test
热冲击试验
潮湿试验
HumidityTest
2
1
HighTemperature
Test
LowTemperature
Test
高温试验
Item
20 Sec.
1hour
1hour
Specification
Specification forMagneticTransducer
KPM-G1201A9-K9096 OEM9096R
1.0

喷码
蜂鸣器在PCB板中的布局图
(Layout of buzzeron PCB)
2- 0.8
min 14
4.5
2.2
2- 0.6±0.05
9±0.2
waterproofseal
6.0
12 0 -0.2
KPM-G1201A9
6.5
6.5±0.2
Ningbo Kepo ElectronicsCo.,Ltd. http://www.chinaacoustic.com
8. Dimensions
UNIT: mm
Tolerance : ±0.5
FIRSTANGLEPROJECTION
ModelNo.:
Page
RevisionNo.
DrawingNo.
7/9
Specification forMagneticTransducer
KPM-G1201A9-K9096 OEM9096R
1.0

Ningbo Kepo ElectronicsCo.,Ltd. http://www.chinaacoustic.com
ModelNo.:
Page
RevisionNo.
DrawingNo.
8/9
Pleasecontactusbeforeusingourproductsfortheundermentioned applications
requiringespeciallyhighreliabilityinordertopreventdefectswhichmight directlycause
damagetootherparty'slife,bodyorproperty(listed below).
⑴Aircraftequipment 飞行设备
⑵Aerospaceequipment 航天设备
⑶Underseaequipment 潜水设备
⑷Medicalequipment 医疗设备
⑸Transportationequipment(automobiles,trains ,ships) 交通设施
⑹Trafficsignal equipment 交通信号设备
⑺Disasterprevention/crimepreventionequipment 防灾害/防犯罪设备
⑻Data-processingequipment 数据处理设备
⑼Applicationsofsimilarcomplexityorreliabilityrequirementscomparable tothe
applications listedintheabove 以及与上述相类似或可靠性要求更高的设备
如果 品使用于下列高可靠性的装置时,请与我们取得联系,以免对人的生命,财和身
体造成损害.
11.注意事项 Cautions forUse
11.1如果 品所承受的机械应力超过规定的值,件可能被破坏.
Thecomponentmaybedamagedifmechanicalstressoverthis specification is
applied.
在使用烙铁的情况下,应注意烙铁头的温度应该保持在+350℃以下,并且焊接时间
控制在3秒内.
Incaseofusingsolderironforsoldering,thetopof soldering iron's
temperatureshouldbekeptless than +350 ℃.Moreoverthesolderingtimeshould be
alsokeptwithin3seconds.
9.包装标准 PackagingStandard
品的外包装是纸箱,它应该清楚的标明型号,数量,出厂检验批号.
在运输及储存的过程中,品必须不会受到机械损伤.
Eachminimumpackageunitofproductsshallbeinacartonbox and it shall be clearly
markedwithPartNumber,quantityandoutgoinginspection number.
Thereshallbenomechanicaldamageonproductsduringtransportation and/orin
storage.
11.2
10.警告 Cautions
Specification forMagneticTransducer
KPM-G1201A9-K9096 OEM9096R
1.0

NingboKepoElectronics Co.,Ltd. http://www.chinaacoustic.com
12.Revision
ModelNo.:
Page
RevisionNo.
DrawingNo.
9/9
Rev.
No. DATE PAGE DESCRIPTION SIGN
92012.08.06 primary 1.0
Specification forMagneticTransducer
KPM-G1201A9-K9096 OEM9096R
1.0