TEWJ-B-BA-e-2310 3
7.8.2 External adjustment <CalExt > ................................................................21
7.8.3 External adjustment with user-defined adjustment weight < caleud >.......22
7.8.4 Gravitational constant adjustment location < graadj >..............................24
7.8.5 Gravitational constant place of location < grause >...................................25
8Verification ....................................................................................................... 26
9Basic Operation ............................................................................................... 28
9.1 Turn on/off................................................................................................... 28
9.2 Simple weighing .......................................................................................... 28
9.3 Zeroing........................................................................................................ 29
9.4 Taring.......................................................................................................... 29
9.5 Switch-over weighing unit............................................................................ 30
10 Operating concept........................................................................................ 32
11 Application <Weighing>............................................................................... 34
11.1 Application-specific settings..................................................................... 34
11.2 PRE-Tare................................................................................................. 36
11.2.1 Take over the placed weight as PRE-TARE value...........................................36
11.2.2 Enter the known tare weight numerically.........................................................37
11.3 Data-Hold function ................................................................................... 38
11.4 Weighing Units......................................................................................... 38
11.4.1 Setting weighing unit.......................................................................................38
11.4.2 Weighing with multiplication factor via the application unit <FFA>...................39
11.4.3 Percent weighing by application unit <%>.......................................................40
11.4.4 Molar weighing mode......................................................................................41
12 Application <Counting> ............................................................................... 42
12.1 Application-specific settings..................................................................... 42
12.2 Using the application................................................................................ 43
12.2.1 Piece counting.................................................................................................43
12.2.2 Target counting...............................................................................................46
13 Application < Checkweighing >................................................................... 49
13.1 Application-specific settings..................................................................... 49
13.2 Using the application................................................................................ 50
13.2.1 Target weighing...............................................................................................50
13.2.2 Checkweighing................................................................................................53
14 Menü .............................................................................................................. 55
14.1 Navigation in the menu............................................................................. 55
14.2 Application menu...................................................................................... 55
14.3 Setup menu.............................................................................................. 56
