TFCB-A-BA-e-2312 3
7.8.1 External adjustment <CalExt > ................................................................17
7.8.2 External adjustment with user-defined adjustment weight < caleud >.......18
7.8.3 Gravitational constant adjustment location < graadj >..............................20
7.8.4 Gravitational constant place of location < grause >...................................21
8Verification......................................................................................................... 22
9Basic Operation ................................................................................................. 24
9.1 Turn on/off................................................................................................... 24
9.2 Simple weighing .......................................................................................... 24
9.3 Zeroing........................................................................................................ 25
9.4 Taring.......................................................................................................... 25
9.5 Change-over button and F button (standard settings)................................. 26
9.5.1 Switch-over weighing unit................................................................................27
9.5.2 Display gross weight value..............................................................................28
9.5.3 Open PRE-Tare settings.................................................................................28
9.5.4 Carry out Data-Hold function...........................................................................28
10 Operating concept .......................................................................................... 29
11 Application <Weighing>.................................................................................. 31
11.1 Application-specific settings..................................................................... 31
11.2 PRE-Tare................................................................................................. 33
11.2.1 Take over the placed weight as PRE-TARE value...........................................33
11.2.2 Enter the known tare weight numerically.........................................................34
11.3 Data-Hold function ................................................................................... 34
11.4 Weighing Units......................................................................................... 35
11.4.1 Setting weighing unit.......................................................................................35
11.4.2 Weighing with multiplication factor via the application unit <FFA>...................36
11.4.3 Percent weighing by application unit <%>.......................................................36
12 Application <Counting>................................................................................... 37
12.1 Application-specific settings..................................................................... 37
12.2 Using the application................................................................................ 38
12.2.1 Piece counting.................................................................................................38
12.2.2 Target counting...............................................................................................41
13 Application < Checkweighing >....................................................................... 44
13.1 Application-specific settings..................................................................... 44
13.2 Using the application................................................................................ 45
13.2.1 Target weighing...............................................................................................45
13.2.2 Checkweighing................................................................................................48
14 Menu............................................................................................................... 50
