Key Digital KD-EXWPSTX User manual

Single Gang HDMI USB-C
over 50m CAT5e/6 Wall Plate
Switcher Transmitter.
4K/UHD, 18G, Power over CAT,
Auto Switching.
KD-EXWPSTx
Quick Setup Guide
The Experts in Digital Video Technology and Solutions™

2 1
CONNECT:
1. Connect video sources into the HDMI and USB-C input ports of
KD-EXWPSTx
2.
Connect video displays/projectors to the HDMI output port of
KD-EX18GRx (sold separately)
3.
If collecting IR control signals at the wall plate, connect an IR
emitter to KD-EX18GRx’s IR Out port and apply the emitter head to
the IR sensor of the device you wish to control.
4.
Connect CAT5e/6 cabling from KD-EXWPSTx’s UHDoTP output
to KD-EX18GRx UHDoTP input. Ensure that the cable meets the
required minimum length of 17ft / 5m.
5.
Connect power. Screw-in power supply to the KD-EX18GRx unit,
and then connect power to outlet.
CONFIGURE:
Configure KD-EXWPSTx with Key Digital Management Software
™
Pro (KDMS
™
Pro). Download HERE.
1. Connect to KD-EXWPSTx from your PC using the USB micro port
on the face of the unit. Open the KDMS
™
Pro software and perform
a USB scan (fig. 1a). Choose “
NO ” and Start Scan when the USB
Device Scan prompt appears (fig. 1b)
Quick Setup Guide
Begin with the KD-EXWPSTx and KD-EX18GRx, all sources,
display devices, audio system, and any other connected
peripherals powered OFF.
1
3
3 2
4
4
5
Always follow the instructions provided in this Setup Guide.

2 3
2. Choose the detected device from the Devices window (fig. 2a)
3. Choose the desired EDID handshake that you wish to provide to your
connect video sources (fig. 2b)
4. Set Auto Switching as desired (fig. 2c)
»When Auto Switching is On, the Input Select button backlighting
will illuminate solid.
»When set to Forced On, the Input Select button on the face
of the wall plate will no longer switch video sources. Instead
switching will only occur when a new source is connected, or an
active source is disconnected.
5. Save (fig. 2d)
6. Refer to the Connections, Buttons, and LEDs section of Operating
Manual for more information. Available via KD-EXWPSTx page.
CONTROL:
Use the Input Select button to toggle between the HDMI or USB-C
source inputs or to activate Auto Switch mode
Press and hold for 3 seconds to activate Auto Switching. Solid
illumination of the backlighting indicates mode has been set
TEST FOR PROPER OPERATION!
Test for proper operation of the unit and cables in your system
BEFORE permanently securing the unit for final installation.
Ensure that you leave enough ventilation space to provide sufficient
airflow and cooling.
Please visit www.keydigital.com for the latest product documentation
and software downloads. Product features and specifications are
subject to change without notice.

4 5
Application Example Warranty Information
All Key Digital
®
products are built to high manufacturing standards and
should provide years of trouble-free operation. They are backed by a
Key Digital Limited 3 Year Product Warranty Policy.
http://www.keydigital.com/warranty.htm
Important Product Warnings:
1. Connect all cables before providing power to the unit.
2. Test for proper operation before securing unit behind walls or in hard
to access spaces.
3. If installing the unit into wall or mounting bracket into sheet-rock,
provide proper screw support with bolts or sheet-rock anchors.
Safety Instructions:
Please be sure to follow these instructions for safe operation of your unit.
1. Read and follow all instructions.
2. Heed all warnings.
3. Do not use this device near water.
4. Clean only with dry cloth.
5. Install in accordance with the manufacturer’s instructions.
6. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
7. Only use attachments/accessories specified by the manufacturer.
8. Refer all servicing to qualified service personnel. Servicing is
required when the device has been damaged in any way including:
»Damage to the power supply or power plug
»Exposure to rain or moisture
Power Supply Use:
You MUST use the Power Supply PROVIDED with your unit or you VOID
the Key Digital
®
Warranty and risk damage to your unit and associated
equipment.
Remote
Instal at table,
podium, or wall.
Sold Separately.
Install at projector
or behind display
HDMI
USB-C
KD-EX18GRx
KD-EXWPSTx
CAT5e/6
HDMI
IR
Projector or Display

Key Digital
®
, led by digital video
pioneer Mike Tsinberg, develops and
manufactures high quality, cutting-edge
technology solutions for virtually all
applications where high-end video and
control are important. Key Digital
®
is at
the forefront of the video industry for
Home Theater Retailers, Custom Installers,
System Integrators, Broadcasters,
Manufacturers, and Consumers.
Key Digital®
521 East 3rd Street, Mount Vernon, NY 10553
Phone: [phone] Fax: [phone]
Web: www.keydigital.com
Rev 0 – Nov 2020
© 2019 Key Digital, Inc. All rights reserved.