Kia Sorento 4wd 2011 Instruction manual

Please navigate through the PDF using the options
provided by OnlyManuals.com on the sidebar.
Factory Workshop Manual
Make
Model
Engine and year
This manual was submitted by
Date
Kia
Sorento 4wd
V6-3.5L (2011)
Anonymous
1st January 2018

Kia Sorento 4wd Workshop Manual (V6-3.5L (2011))
Kia Workshop Manuals > Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Alarm Horn
Relay > Component Information > Locations

Alarm Horn Relay: Locations
E/R Fuse And Relay Box View

Kia Sorento 4wd Workshop Manual (V6-3.5L (2011))
Kia Workshop Manuals > Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Alarm Horn
Relay > Component Information > Locations > Page 7

E/R Fuse And Relay Box Circuit Details

Kia Sorento 4wd Workshop Manual (V6-3.5L (2011))
Kia Workshop Manuals > Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Alarm Horn
Relay > Component Information > Locations > Page 8

E/R Fuse And Relay Box Circuit Diagram

Kia Sorento 4wd Workshop Manual (V6-3.5L (2011))
Kia Workshop Manuals > Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Alarm Horn
Relay > Component Information > Locations > Page 9

Kia Sorento 4wd Workshop Manual (V6-3.5L (2011))
Kia Workshop Manuals > Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Alarm
Module, (Vehicle Antitheft) > Component Information > Locations
Alarm Module: Locations

Kia Sorento 4wd Workshop Manual (V6-3.5L (2011))
Kia Workshop Manuals > Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Keyless
Entry Module > Component Information > Locations
Keyless Entry Module: Locations

Kia Sorento 4wd Workshop Manual (V6-3.5L (2011))
Kia Workshop Manuals > Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Parking
Assist Control Module > Component Information > Locations
Parking Assist Control Module: Locations

Kia Sorento 4wd Workshop Manual (V6-3.5L (2011))
Kia Workshop Manuals > Relays and Modules > Relays and Modules - Body and Frame > Door Lock Relay > Component
Information > Locations

Door Lock Relay: Locations
ICM Relay Box

Kia Sorento 4wd Workshop Manual (V6-3.5L (2011))
Kia Workshop Manuals > Relays and Modules > Relays and Modules - Body and Frame > Keyless Entry Module >
Component Information > Locations
Keyless Entry Module: Locations

Kia Sorento 4wd Workshop Manual (V6-3.5L (2011))
Kia Workshop Manuals > Relays and Modules > Relays and Modules - Body and Frame > Seat Heater Relay > Component
Information > Locations

Seat Heater Relay: Locations
ICM Relay Box

Kia Sorento 4wd Workshop Manual (V6-3.5L (2011))
Kia Workshop Manuals > Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake
Control Module > Component Information > Locations
Electronic Brake Control Module: Locations

Kia Sorento 4wd Workshop Manual (V6-3.5L (2011))
Kia Workshop Manuals > Relays and Modules > Relays and Modules - Brakes and Traction Control > Traction Control
Module > Component Information > Technical Service Bulletins > Customer Interest for Traction Control Module: > CHA026
> Jul > 10 > ABS/TCS - ECS Software Upgrade For Hill Assist System
Traction Control Module: Customer Interest ABS/TCS - ECS Software Upgrade For Hill Assist
System
GROUP CHASSIS
MODEL 2011MY SORENTO (XM)
NUMBER 026
DATE JULY 2010
SUBJECT: 2011MY SORENTO (XM) M/T HECU SOFTWARE UPGRADE
This bulletin provides information related to a Electronic Stability Control (ESC) software upgrade
available for some 2011 MY Sorento (XM) vehicles with manual transmission built from October 23,
2009 to March 30, 2010. This software upgrade will correct a concern which may cause the HAC
(Hill-start Assist Control) to not operate when the manual transmission lever is placed into Reverse.
Kia recommends that vehicles with this concern receive this software upgrade to allow the ABS
HECU to properly apply the HAC function when the vehicle is in Reverse.
NOTICE
To verify the vehicle is affected, be sure to check the version of the vehicle's control unit ROM ID
with reference to the ROM ID Information Table shown in this bulletin before attempting to upgrade
the control unit software.

To correct this condition, the ECM should be reprogrammed using the GDS download as described
in this bulletin.
Service Procedure
UPGRADE EVENT NAME
NOTICE
^ A fully charged battery is necessary before ECU upgrade can take place. DO NOT connect a
battery charger to the vehicle during ECU upgrade. Make
sure the blower motor is "OFF" during ECU upgrade.
^ All ECU upgrades must be done with the ignition key in the "ON" position.
^ Be careful not to disconnect any cables connected to the vehicle or GDS during the ECU upgrade
procedure.
^ DO NOT start the engine during ECU upgrade.
^ DO NOT turn the ignition key "OFF" or interrupt the power supply during ECU upgrade.
^ When the ECU upgrade is completed, turn the ignition key "OFF" and wait 20 seconds before
starting the engine.
^ ONLY use approved ECU upgrade software designated for the correct model, year and engine
size. Failure to do so may create other driveability
issues due to the use of the incorrect ECM/PCM calibration.

Kia Sorento 4wd Workshop Manual (V6-3.5L (2011))
Kia Workshop Manuals > Relays and Modules > Relays and Modules - Brakes and Traction Control > Traction Control
Module > Component Information > Technical Service Bulletins > Customer Interest for Traction Control Module: > CHA026
> Jul > 10 > ABS/TCS - ECS Software Upgrade For Hill Assist System > Page 41