KidKraft 65823 User manual

1
Item #65823
© 2011 KidKraft, LP
CAUTION:
ADULT ASSEMBLY REQUIRED. Hardware contains
small screws with sharp points. Keep unassembled
parts out of the reach of small children.
PARTS LIST
Please retain this information for future reference To order replacement parts, please visit www.kidkraft.com
HARDWARE
My Dreamy Dollhouse
Assembly Instructions
WARNING:
CHOKING HAZARD. Small parts and sharp
points, not suitable for children under 3 years.
USE AND MAINTENANCE:
-Use on level surfaces only
-Please check assembly at regular intervals, and
frequently tighten hardware if necessary. If maintenance
is not carried out, the product could cease to function
properly.
x 2
x 3
37 38
35
46
39
43
5
6
1
4
2
3
13
x2
24 28 29
30
25
31
26
17 18
19
22 x2
7a x 2
7b x 2
10
11 x2
14
20
15 16
32
27
23
50x 2
47x 3
x 2
52 x 2
51
54
55
53
8
912
48
x 2
57
56
36
40 41
33a
42a
42b
42c
33b
21
44
Customer Service
1-800-933-0771
www.kidkraft.com
WARNING:
If used improperly, your dollhouse may be pulled over or fall,
creating risk of injury or damage. To minimize this risk,we
recommend that you use the enclosed wall anchor kit, which gives
you the option of attaching the dollhouse to a wall. In addition,
children should not be permitted to climb or pull on the dollhouse.
A. Blue Cross Dowel Bolt
x 4 pcs
C. Yellow Cross Dowel Bolt
x 4 pcs
D. Hex Bolt x 2 pcs
B. Cross Dowel Nut x 13 pcs
G. Yellow Cross Dowel Bolt
x 2 pcs
E. White Cross Dowel Bolt
x 1 pc
F. White Cross Dowel Bolt
x 2 pcs
H. Pink Large Head Screw
x 2 pcs
J. Yellow Cross Dowel Bolt
x 2 pcs
L. Pink Insert Bolt x 2 pcs
Q. White Insert Bolt x 2 pcs
N. Pink Small Head Screw
x 2 pcs
I. Espresso Large Head
Screw x 4 pcs
P. White Screw x 7 pcs
M. Large Head Screw x 4 pcs
O. Espresso Small Head
Screw x 2 pcs
R. Purple Screw x 4 pcs
S. Light Blue Large Head
Screw x 13 pcs
U. Screw x 4 pcs
T. Yellow Screw x 2 pcs
V. White Screw x 27 pcs
The following tool (not
included) is required for
assembly :
Phillips®screwdriver
Allen Wrench x 1 pc
2 in / 52 mm
2 in / 52 mm
2 in / 52 mm
3/4 in / 18 mm
3/4 in / 18 mm
3/4 in / 18 mm
1/2 in / 12 mm
1/2 in / 12 mm
K. White Cross Dowel Bolt
x 2 pcs
1/2 in / 12 mm
1/2 in / 12 mm
1/2 in / 12 mm
7/8 in / 22 mm
7/8 in / 22 mm
7/8 in / 22 mm
3/8 in / 10 mm
2 7/8 in / 72 mm
2 7/8 in / 72 mm
7/8 in / 22 mm
1 9/16 in / 40 mm
34

Before calling customer service, please
locate the batch code number
(example: 2693/65006/04) found on the
bottom or back of your product.
R
R
R
R
Bed Assembly
4
51
52 V
V
13
52
51
V
V
8
47
50
V
VV
V
V
9
47
50
V
V
V
V
V
S
S
9
7a
7b
H
H
8
7a
7b
Piano Assembly Dollhouse Assembly
© 2011 KidKraft, LP
12
47
V
V
V
V
V
48
42a
42b
42c 33a
33b
33b
33b
My Dreamy Dollhouse
Assembly Instructions Item #65823
Step 1
Step 3 Step 4 Step 5 Step 6 Step 7
Step 1 Step 1 Step 2
Customer Service
1-800-933-0771
www.kidkraft.com
2

*Be sure to match artwork on
these parts to match the artwork
in each room of the dollhouse.
1
B
B
B
B
C
C
A
A
2
3
4
21
MM
16
17 20
14
15
19
18
N
O
22
22
I
I
B
11
11
B
F
F
B
B
B
B
G
GA
A
12
5
6
D
D
E
89
10
B
© 2011 KidKraft, LP
My Dreamy Dollhouse
Assembly Instructions Item #65823
Step 8
Step 11 Step 12 Step 13 Step 14 Step 15
Step 9 Step 10
Customer Service
1-800-933-0771
www.kidkraft.com
3

23 J
J
L
L
13
29
28
29
U
U
P
PP
P
P
55
30
28
31
S
SS
S
S
27
24
T
T
P
Q
Q
K
K
25
V
VVV
53
54
30
Do not tighten Hardware “V”
completely until after step 22.
B
B
C
P
C
26
56
57
57
© 2011 KidKraft, LP
My Dreamy Dollhouse
Assembly Instructions Item #65823
Insert elevator slide
into track before
attaching to dollhouse
wall.
Adults can loosen or
tighten the screws on
part 22 to adjust the
elevator resistance.
Step 16
Step 20 Step 21 Step 22 Step 23 Step 24
Step 17 Step 18 Step 19
Customer Service
1-800-933-0771
www.kidkraft.com
4

32
S
S
S
46
© 2011 KidKraft, LP
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio /TV technician for help.
Hang plant by attaching to bottom of roof (Part
46) with hook and loop material.
My Dreamy Dollhouse
Assembly Instructions Item #65823
Step 25
Customer Service
1-800-933-0771
www.kidkraft.com
5

© 2011 KidKraft, LP
My Dreamy Dollhouse
Assembly Instructions Item #65823
Customer Service
1-800-933-0771
www.kidkraft.com
6
Piano Battery Assembly Instructions
Toilet Battery Assembly Instructions
Prior To Use:
Pull Tab
Button
Instructions for Use:
- Sounds are activated when button is pressed.
To replace battery:
-Use a Phillips head screwdriver and
remove cover and set aside.
-Locate the Battery Compartment
underneath the piano.
R
Step 1 Step 2
Step 3
-Screw the cover back into place with a
Phillips head screwdriver.
R
Battery Tips:
- Batteries should always be installed and changed under adult supervision.
- Non-Rechargeable batteries are not to be recharged.
- Rechargeable batteries are only to be charged under adult supervision.
- Only batteries of the same equivalent type as recommended are to be used.
- Batteries are to be inserted with the correct polarity.
- Exhausted batteries are to be removed from the toy and disposed of properly.
- The supply terminals are not to be short circuited.
- Different types of batteries or new and used batteries are not to be mixed.
- DO NOT mix alkaline, standard (carbon-zinc) or rechargeable batteries.
Prior To Use:
Pull Tab
Instructions for Use:
- Sounds are activated when
button is pressed.
To replace battery:
-Use a Phillips head screwdriver
and remove cover and set aside.
-Locate the Battery Compartment
on the back of the toilet.
R
Step 1
- Locate the Battery Compartment underneath the piano
(part 33)
- Pull the tab outward to remove and activate play mode.
- Three (3) LR44 /AG13 (1.5V) Batteries are included in
each piece.
- Locate the Battery Compartment on the back of the
toilet (part 44)
- Pull the tab outward to remove and activate play mode.
- Three (3) LR44 /AG13 (1.5V) Batteries are included in
each piece.
- Replace old batteries with three (3) new LR44 / AG13
(1.5V) batteries.
- Be sure to insert new batteries with positive (+) side up.
- Rechargeable batteries are to be removed from the toy
before being charged.
Button
Bouton

© 2011 KidKraft, LP
My Dreamy Dollhouse
Assembly Instructions Item #65823
Customer Service
1-800-933-0771
www.kidkraft.com
7
Toilet Battery Assembly Instructions Continued Floor Lamp Battery Assembly Instructions
Step 2 Step 3
-Screw the cover back into place with a Phillips®head
screwdriver.
Step 3
Step 2
Step 1
Battery Tips:
Battery Tips:
- Batteries should always be installed and changed under adult supervision.
- Non-Rechargeable batteries are not to be recharged.
- Rechargeable batteries are only to be charged under adult supervision.
- Only batteries of the same equivalent type as recommended are to be used.
- Batteries are to be inserted with the correct polarity.
- Exhausted batteries are to be removed from the toy and disposed of properly.
- The supply terminals are not to be short circuited.
- Different types of batteries or new and used batteries are not to be mixed.
- DO NOT mix alkaline, standard (carbon-zinc) or rechargeable batteries.
Prior To Use:
Pull Tab
Instructions for Use:
- Lights are activated when button is pressed.
-Use a Phillips®head screwdriver
and remove cover and set aside.
-Locate the Battery Compartment
underneath the piano.
Button
To replace battery:
- Locate the Battery Compartment underneath the floor
lamp (part 39)
- Pull the tab outward to remove and activate play mode.
- Three (3) LR44 /AG13 (1.5V) Batteries are included in
each piece.
- Replace old batteries with three (3) new LR44 / AG13
(1.5V) batteries.
- Be sure to insert new batteries with positive (+) side up.
- Rechargeable batteries are to be removed from the toy
before being charged.
- Replace old batteries with three (3)
new LR44 / AG13 (1.5V) batteries.
- Be sure to insert new batteries with
positive (+) side up.
- Rechargeable batteries are to be
removed from the toy before being
charged.
- Batteries should always be installed and changed
under adult supervision.
- Non-Rechargeable batteries are not to be
recharged.
- Rechargeable batteries are only to be charged
under adult supervision.
- Only batteries of the same equivalent type as
recommended are to be used.
- Batteries are to be inserted with the correct
polarity.
- Exhausted batteries are to be removed from the
toy and disposed of properly.
- The supply terminals are not to be short circuited.
- Different types of batteries or new and used
batteries are not to be mixed.
- DO NOT mix alkaline, standard (carbon-zinc) or
rechargeable batteries.