Kidsmill Up! User manual

Highchair Up! - User manual AUS/NZ

INDEX

Congratulations

Warnings/Safety measures/Maintenance

Parts

Installation

Adjusting Safety Harness

Disassembly safety harness/further use of the highchair

Use

Warranty

IMPORTANT! RETAIN THESE INSTRUCTIONS FOR

FUTURE REFERENCE AND READ CAREFULLY

CONGRATULATIONS

Congratulations on the purchase of this Kidsmill Up! Highchair. This product

meets the most stringent safety requirements and is approved according to

the Australian Standard AS 4684:2009. Using this highchair can only be safe

when used according to these instructions. Please read this instruction manual

carefully and store it for future reference. The safety of your child may be

aected if these instructions are not followed.

WARNINGS

WARNING – Follow the manufacturer's instructions.

WARNING – Do not leave your child unattended.

WARNING – The harness must always be used and correctly tted - most injuries

from high chairs are caused by falls.

WARNING – Position the high chair away from solid structures and benches to

avoid injuries caused by falls and by acces to dangerous items.

SAFETY MEASURES

• Do not use the highchair if any part is broken, torn or missing.

• Check the high chair regularly to make sure that the chair is safe and

functioning according to these instructions.

• Be aware of the risk of open res and other sources of strong heat, such as

electric bar res, gas res, etc. in the near vicinity of the highchair.

• Do not use the highchair until the child can sit up unaided.

• Use the highchair on a at, even and horizontal oor and do not elevate the

high chair on any structure or table.

• The high chair should be used in an upright position once the child is capable

of reliably and consistently sitting upright.

• Apply wheel locks when not moving the high chair.

• The high chair can be used up to a maximum weight of 60 kg.

MAINTENANCE

• We recommend cleaning this highchair using a damp cloth. Wipe away the

excess water with a dry cloth immediately.

• Never use aggressive or abrasive cleaning agents because these can aect the

chair or and can also be detrimental to the health of your child.

• Ensure all locking devices work correctly and check the locks and ttings

regularly.

KIDSMILL HIGHCHAIR UP!

PARTS

14.

13.

11.

10.

12.

15.

16.

1. Nut M5 (4x)

2. Screw M5x45 (10x)

3. Nut M5 (4x)

4. Dowel (4x)

5. Hex Key 4

6. Screw M6x16 (8x)

7. Extender Wheel (2x)

8. Glider Boot (2x)

Tools needed

INSTALLATION

Step 1: Fix the connection bars (9+10), backrest(13), safety and the metal tension rod(11) on the chair

leg(7). Attention! Tighten all screws by hand.

Step 2: Fix the second chair

leg(8).

Attention! Tighten all screws

by hand.

2. (5x)

1. (2x)

3. (2x)

4. (2x)

2. (5x)

1. (2x)

3. (2x)

4. (2x)

INSTALLATION

Step 3: Slide the seat(15) and the footrest(14) into

the grooves at the desired height. To mount the

safety bar between the legs, pull the legs outwardly.

Step 4: Place the seat(15) with the curved

corners against the legs.

Step 5: Screw(6) the extender wheels(7) under the rear legs

and the glider boots(8) at the bottom of the front legs. Not

too tight!

Step 6: Place the chair on a at surface and

tighten all screws in the correct order.

6. (8x) 7. (2x) 8. (2x)

ADJUSTING SAFETY HARNESS

'CLICK'

Step 3: Adjust the size of the safety

harness to the size that ts for your

child.

Step 4: Push the buckle parts to

release the safety harness.

Step 1: Remove the seat(15) by loosening the metal tension

bar(11).

Step 3: Remove the screws by using the screwdriver.

DISASSEMBLY SAFETY HARNESS/FURTHER USE OF THE HIGHCHAIR

Step 2: Turn around the seat(15).

Step 4: Pull the crotch strap away from the seat(15). Step 5: Remove the D-ring from the crotch strap and now

you are able to remove the crotch strap from the seat(15).

DISASSEMBLY SAFETY HARNESS/FURTHER USE OF THE HIGHCHAIR

4 5

Step 1: Adjusting the seat(15) and

footrest(14) can be done by the

loosening and tightening of the metal

tension bar(11).

USE

WARRANTY

Validity: 2 years from date of purchase.

The warranty is only valid in conjunction with proof of purchase. The warranty covers

the replacement of the entire product or parts when there a manufacturing defect. After

the expiration of the warranty there are costs attached to any repairs. The supplier takes

no responsibility for any damage or injury to persons, animals and belongings due to

misuse of the harness or by failure to follow the accompanying instructions.

Exclusion

All rights in respect of the guarantee and the responsibility of the supplier shall lapse if

the product:

• Is dismantled by unauthorized persons;

• Is not properly used or stored.

Furthermore, all external damage to the product that does not aect the proper

functioning is excluded from the warranty.

Notes: ....................................................................................................................................................

.................................................................................................................................................................

WARRANTY FORM

Customer name: ........................................................................................................................................................

Order number: ............................................................................................................................................................

Quantity Damaged Missing

...................

................... ...................

Product:

Article number:

Serial number:

..................................................................

...................................................................

...............................................................

Part number (p. 4)