KinAn SW1731 User manual

Rackmount KVM Console
User Manual
Print date: 2022 / 08
Version: V2.0

VGA/HDMI/DVI User Manual
- 1 -
Description
Single port console integrates the monitor, keyboard and mouse in a 1U
height device, it can be installed in a standard 19” rack. It can connect one
computer to control the monitor, keyboard and mouse.
Features
3 in 1 LCD console integrating the monitor, keyboard and mouse.
Directly connect computer or KVM switch to control single or multiple
computers.
17.3” LCD monitor with high brightness, high definition and high
resolution.
Ultra-slim keyboard with 99 keys（82+17）.
Standard PS/2 touchpad.
With release catch in front panel.
Automatic-locking guide rail
Supports four types of video input – HDMI / DVI / VGA
Appearance
1-1 appearance

VGA/HDMI/DVI User Manual
- 2 -
Front View
1-2 front view
1 LCD Monitor
2 Rear Bracket Slot
3 Display Menu Buttons
4 Mounting Bracket
5 Keyboard
6 Touchpad
7 Handle
8 Release Switch
9 Display Panel

VGA/HDMI/DVI User Manual
- 3 -
Cable Connection
*USB cable must be connected to server
1-3 cable connection
To ensure signal integrity and simplify cable layout, we strongly recommend
you use high quality cables with different length as shown in below table.
No.
Cable
Model No.
Length
Remarks
1
USB Cable
CU-1500
1.5 M
Included in
the package
2
KVM Cable -VGA
KA-1500
1.5 M
Included in
the package
3
KVM Cable-DVI
DV-1500
1.5 M
Optional
4
KVM Cable -HDMI
HD-1500
1.5 M
Optional

VGA/HDMI/DVI User Manual
- 4 -
Rack Mounting
A standard rack mounting kit is provided to mount the switch in a depth of
686-770mm n a standard 19” rack. For other mounting distance, the rear
brackets need to be customized accordingly
With one person hold the switch in place and the other person slides the L
bracket into the switch’s side mounting brackets from the front to the back,
then screws the brackets to the rack. (see below installation drawing)
2-1 rack mounting
2-2 rack mounting

VGA/HDMI/DVI User Manual
- 5 -
Opening the Console
Power on the KVM after connecting cables.
Power on the server or PC after power on the KVM.
Release the release catch.
2-3 unlocking
*Note: The release catch can only do horizontal locking, it can’t bear any load.
Pull the KVM console all the way out and the slide rail automatically
locked to its place.
Rotate the LCD panel all the way back to expose the LCD screen; the LCD
module can be rotated up to 108°.
2-4 open angel of the console
Closing the Console
Close the console and the power automatically shut down.
Push the release catch in the direction of the arrow, push the LED panel
all the way in until it automatically locks up.
2-5 unlocking the slide rail

VGA/HDMI/DVI User Manual
- 6 -
Operating the Monitor
3-1 Operating the Monitor
The LED OSD allows you to set up and configure the LED display.
Buttons
Functions
MENU
SELECT
Brings up the main menu.
EXIT/AUTO
Exits the current menu and returns to the previous
menu or exits the LED OSD.
Press AUTO for automatic configuration.
SL-/SL+
Moves the menu to make corresponding
adjustment.
LED state
Green: Running
Red: Power off or access nonstandard VESA signal
Flashing green: Energy saving mode or no signal
Press AUTO if the screen migrates after power on or under other
circumstances, then the screen auto-configures to its best display state.
Note:
It may not be adjusted to its best state if part of the display mode is
not standard VESA mode. If so, return back to OSD menu to RESET,
then it will revert back to normal.
It is recommended to set up the display mode at 1920×1080, refresh
rate at 60Hz.

VGA/HDMI/DVI User Manual
- 7 -
Specifications
Model
SW1731
Computer
Connections
Direct
1
Max
1
Port
emulation
Keyboard,
mouse
PS/2, USB
LCD monitor
LCD model
FHD TFT
View area
17.3"
Optimum
resolution
1920×1080@60Hz
Display color
262K
Brightness
300cd/m² (T y p)
Contrast ratio
800: 1(T y p)
Pixel pitch(mm)
0.1989(H)×0.1989(W)
Mouse
X/Y resolution
>1000 points / inch, (40 points/mm)
Scroll wheel
Support scroll wheel function
Keyboard
99 keys
(82 keys main keyboard +17 independent
small numeric keyboard)
Input power
100V-240Vac, 50-60Hz, <1.5A
Power consumption
13W
Mounting distance
686-770mm (L=262mm)
Mounting bracket can be customized for
Other mounting distance
Operating temperature
0—50 ℃
Store temperature
-20—60 ℃
Humidity
0—80% RH, non-condensing
Net weight
11.3kg
Product dimension (W× D×H)
448mm×525.6mm×42.5mm
Package dimension (W× D×H)
765mm×615mm×185mm
Optional power input
-36V— -72Vdc