KinAn HT5708 User manual

Cat5 KVM over IP Console
(8 Port/16 Port/ 24 Port/ 32 Port)
User Manual
www.kinankvm.com
@all right reserved Shenzhen Kinan Technology Co., Ltd.
Print date: 2022/03
Version: V1.2

8 Port /16 Port/24 Port/32 Port User Manual
-1-
Table of Contents
1. Product Overview................................................................................................................. 3
1.1 Introduction...............................................................................................................3
1.2 Features..................................................................................................................... 3
1.3 Appearance................................................................................................................5
2. Installation and Start-up....................................................................................................... 8
2.1 Rack Mounting...........................................................................................................8
2.2 Install KVM Components........................................................................................... 9
2.3 KVM Adapter........................................................................................................... 10
2.4 Opening the Console............................................................................................... 11
2.5 Closing the Console................................................................................................. 12
3. LED Operation.....................................................................................................................13
3.1 LED Functions.......................................................................................................... 13
3.2 Operating the Monitor............................................................................................ 15
3.3 Key Combination Function...................................................................................... 16
4. User Interface Operation.................................................................................................... 17
4.1 UI function instruction............................................................................................ 18
4.2 User Management...................................................................................................19
User List................................................................................................................ 19
User group list...................................................................................................... 21
Change password................................................................................................. 22
4.3 System Settings........................................................................................................23
Network Settings.................................................................................................. 23
Date/Time.............................................................................................................24
Device Information...............................................................................................25
Encoding Parameters............................................................................................26
Serial.....................................................................................................................26
4.4 Security Management............................................................................................. 26
Security Settings................................................................................................... 27
Audit Log...............................................................................................................28
4.5 System Maintenance............................................................................................... 28
Backup& Restore.................................................................................................. 28
Ping the host.........................................................................................................29
Equipment Management......................................................................................29
5. Remote Control...................................................................................................................30
5.1 Configure the target server..................................................................................... 30
5.2 Remote WEB interface settings...............................................................................32
5.3 Log in....................................................................................................................... 35
5.4 Video Control Interface Menu.................................................................................38

8 Port /16 Port/24 Port/32 Port User Manual
-2-
6. IP Menu Option...................................................................................................................43
6.1 User management...................................................................................................43
User List................................................................................................................ 43
User group list...................................................................................................... 46
Change Password..................................................................................................48
6.2 System Settings........................................................................................................48
Network Settings.................................................................................................. 49
Date/Time.............................................................................................................50
Encoding Parameters............................................................................................51
Serial port setting................................................................................................. 51
6.3 Security Management............................................................................................. 51
Security Settings................................................................................................... 52
Audit Log...............................................................................................................53
6.4 System Maintenance............................................................................................... 53
Backup& recovery................................................................................................ 53
Ping the host.........................................................................................................54
equipment Management..................................................................................... 54
Remote upgrade...................................................................................................54
7. Appendix.............................................................................................................................55
7.1 Specifications (17”)..................................................................................................55
7.2 Specifications (19”)..................................................................................................56
7.3 Grounding Requirements........................................................................................ 57

8 Port /16 Port/24 Port/32 Port User Manual
-3-
1. Product Overview
1.1 Introduction
The IP-based KVM (IP-KVM) redirects the local keyboard, mouse and video data to a remote
management console. The operator can safely manage one or many computers locally at
the server site or remotely via a standard internet browser. Securely gain BIOS level access
to systems for maintenance, support or failure recovery over the internet.
The IP-KVM console integrates multiple KVM switches in a 1U height console. It can control
multiple computers with a set of devices including monitor, keyboard and mouse; saving
cost and space by consolidating the hardware to a single device.
The IP-KVM console is fast and easy to install. Simply connect corresponding cables to the
correct ports of the KVM and its module without software configuration. Connect multiple
computers with compact RJ-45 connectors and CAT5e/6/7 cables, transmitting distance is
up to 100M.
1.2 Features
Hardware
17” & 19” TFT LCD monitor, high definition and high resolution
Rack-mountable in a 1U EIA system rack
Full size keyboard with integrated number pad
Trackball eliminates the need for a separate, external mouse
Dual power supply
Local Console
Control up to 8 / 16/ 24 / 32 computers
Support 1 local user and 2 remote users, port share mode allows local and remote
users to gain access to a server simultaneously or access different servers
Easy-to-use switching by browser-based UI interface, hotkeys and pushbuttons
Support servers with VGA/HDMI/DVI/DP port
Multiplatform client support (Windows, Linux, Unix, Mac, Solaris (Sun), Redhat,
Ubuntu
Supports a graphical interface for intuitive and convenient human-computer
interaction- local resolution is up to 1280 x 1024@60Hz
Supports mouse synchronization mode-automatically synchronizes the local and
remote mouse movements
Video synchronization with local console - EDID information for local console

8 Port /16 Port/24 Port/32 Port User Manual
-4-
display can be stored in the host module for video resolution optimization
Keyboard and mouse emulation to ensure the normal booting
Auto scan feature for monitoring user-selected computer
Hot pluggable – add or remove computers without having to power down the
switch
Remote Console
Adaptive 10 / 100 / 1000 Mbps network
WEB browser-based or KVM_Clients remote management
BIOS-level access
Video quality and video tolerance can be adjusted to optimize data transfer speed,
up to 30 FPS
Full screen or scalable video display
Remote users and local users can control the same server synchronously
Support AES / DES / 3DES encryption
Support audit function-allows the administrator to audit the device through the
system log and operation log
Support low-bandwidth real-time transmission, the bandwidth is less than 2M
Exit Macros support
Configurable user and group permissions for server access and control
Supports firmware upgrade

8 Port /16 Port/24 Port/32 Port User Manual
-5-
1.3 Appearance
Front View
Figure 1.1 Front view
1. LCD Monitor
2. Rear Bracket Slot
3. LED OSD Controls
4. Front Bracket
5. Keyboard
6. Touchpad
7. Handle
8. Release Catch
9. Display Panel
10. Switch LED

8 Port /16 Port/24 Port/32 Port User Manual
-6-
Rear View
Figure 1.2 Rear view
1. Power Input (AC)
2. Power Switch
3. Power Input (DC)
4. LAN Port
5. USB Port
6. REMOTE Port
7. Monitor Port
8. PC Connecting Port
9. Ground Screw

8 Port /16 Port/24 Port/32 Port User Manual
-7-
Structure and Size (17” & 19”)
Figure 1.3 17” console size dimensions
Figure 1.4 19” console size dimensions

8 Port /16 Port/24 Port/32 Port User Manual
-8-
2. Installation and Start-up
2.1 Rack Mounting
A standard rack mounting kit is provided to mount the switch in a depth of 600-850mm
(17”), 716-825mm (19”) in a standard 19” rack. For other mounting distances, the rear
brackets need to be customized accordingly. With one person hold the switch in place, the
other person slides the L bracket into the switch’s side mounting brackets from the front to
the back, then screws the brackets to the rack (see below installation drawing).
Figure 2.1 Rack Installation Diagram

8 Port /16 Port/24 Port/32 Port User Manual
-9-
2.2 Install KVM Components
Figure 2.2 Installation diagram
Installation Steps:
1. Make sure the KVM console has been connected to the ground.
2. Connect the KVM adapter to the PC or Server.
3. Connect the KVM adapter to the KVM port with a CAT5 cable.
4. You can remote control the KVM switch via IP.
5. Using power adapter to connect the KVM into 220V AC power supply.
6. Power on the switch
7. Connect the external keyboard, mouse and monitor (optional)

8 Port /16 Port/24 Port/32 Port User Manual
-10 -
2.3 KVM Adapter
PS/2 Adapter
Model No.
Keyboard/Mouse
PC
Explanation
KCM-1100P
PS/2
VGA
Connect to PS2/VGA server
USB Adapter
Model No.
Keyboard/Mouse
PC
Explanation
KCM-1200U
USB
VGA
Connect to USB/VGA server
KCM-3200H
USB
HDMI
Connect to USB/HDMI server
KCM-2200D
USB
DVI
Connect to USB/DVI server
KCM-4200P
USB
DP
Connect to USB/DP server
LED Indicator of the KVM Adapter
Components
Function
Green
Online
Indicates that the corresponding host has been
connected to the KVM switch and Power On.
Orange
Selected
Indicates that the corresponding host is in use.

8 Port /16 Port/24 Port/32 Port User Manual
-11 -
2.4 Opening the Console
1. Disengage the release catch
Figure 2.3 Unlocking
Note: The release lock can only do horizontal locking, it doesn’t bear any load.
2. Pull the KVM console all the way out until it clicks into place.
3. Rotate the LCD module all the way back to expose the LCD screen; the LCD module
can be rotated up to 108°.
Best Resolution :
1280x1024@60Hz
Figure 2.4 Open angle of the console
4. The KVM makes two “beep” sounds after power on, the orange light keeps flashing
and an UI window appears for you to input user name and password.
User Name:
admin
Password:
admin
5. LCD panel is powered on when the power LED is green.
6. Power on the computer or server after power on the KVM.

8 Port /16 Port/24 Port/32 Port User Manual
-12 -
2.5 Closing the Console
Close the LCD display panel and the power automatically shut down.
Push the release catch in the direction of the arrow; push the LCD panel all the
way in until it automatically locks up.
Key
AUTO LOCK
Figure 2.5 Unlocking the console

8 Port /16 Port/24 Port/32 Port User Manual
-13 -
3. LED Operation
3.1 LED Functions
Figure 3.1 16 Port LED front views
No.
Components
Function
1
1-16
Switching freely from port 1 to port 16
Reset
Press 【1】and【2】at the same time for three
seconds resets the keyboard and mouse
Scan
Press【7】and【8】at the same time for three seconds
enters the auto scan mode.
Brightness
Press 【3】for three seconds enters brightness
adjusting mode.
33 are flashing on the LED tube.
Then press 【5】，【6】to adjust.
Press【3】exits or waits for five seconds and it will
auto-exit.
Definition
Press 【4】for three seconds enters definition
adjusting mode.
44 are flashing on the LED tube.
Then press 【5】，【6】to adjust.
Press 【4】exits or waits for five seconds and it will
auto-exit
Initialize
Press 【6】for three seconds will initialize the
brightness and definition of each port.
2
Port Selection
Buttons & LEDs
Indicator LEDs are built into the switches, the online
LED light is on the left and the selected LED light is
on the right.
1. An online LED light (green) indicates that the
KVM has connected to its corresponding
computer and power on.
2. A selected LED light (orange) indicates that the
computer attached to its corresponding port is
up and running.
3
Station ID
Display the current port

8 Port /16 Port/24 Port/32 Port User Manual
-14 -
Figure 3.2 32 Port LED front views
No.
Components
Function
1
0~9 +Enter
Switching from port 1 to port 32
Port 8 : If you want to switch to Port 8, press【8】, and the
LED light displays , then press “Enter”, you will
come to Port 8.
Port 32: If you want to switch to Port 32, press【3】and
【2】, the LED light displays , and then press
“Enter”, you will come to Port 32.
2
(+, -)
Adjust Brightness
Press , the LED light blinking with , and then press
“+” and “–“to adjust the brightness.
3
(+, -)
Adjust Definition
Press , the LED light blinking with , and then
press “+” and “- “to adjust the definition.
4
Station ID
Display the current port

8 Port /16 Port/24 Port/32 Port User Manual
-15 -
3.2 Operating the Monitor
Figure 3.3 Monitor adjust menu buttons
The LED OSD allows you to set up and configure the LED display.
Buttons
Functions
MENU SELECT
Brings up the main menu.
EXIT/AUTO
Exits the current menu and returns to the previous menu or
exits the LED OSD.
Press AUTO for automatic configuration.
SL-/SL+
Moves the menu to make corresponding adjustment.
LED state
Green: Running
Red: Power off or access non standard VESA signal
Flashing green: Energy saving mode or no signal
Press AUTO if the screen migrates after power on or under other circumstances, then the
screen auto-configures to its best display state.
Note:
It may not be adjusted to its best state if part of the display mode is not standard
VESA mode. if so, return back to OSD menu to RESET, then it will revert back to
normal.
It is recommended to set up the display mode at 1280x1024, refresh rate at 60Hz.

8 Port /16 Port/24 Port/32 Port User Manual
-16 -
3.3 Key Combination Function
If you want to set other hotkeys to pop up the UI interface or key combination switch, set
up the via the local console, 【System Settings】>【Device info】
Pop up the
UI interface
Double click【L_Ctrl】
Double click【L_Alt】
Double click【Scroll Lock 】
Double click【Caps Lock】
Hot key
【L _Alt】+【L_Ctrl】
【L_Win】+【L_Ctrl】
【L_Alt】+【L_Win】
Hotkey commands are as follows：
Hot key + the corresponding function key
Function
Operating
Function description
Port switch
+Number
Skip ports from 1~16
+【↑】/【→】
Skip to previous port
+【↓】/【←】
Skip to next port
Brightness
+【+】
Brightness +
+【-】
Brightness -
Definition
+【>】
Definition +
+【<】
Definition -
Reset Video
+【R】
Reset the video
Lock KVM
+【L】
Lock KVM and a user login window
appears

8 Port /16 Port/24 Port/32 Port User Manual
-17 -
4. User Interface Operation
login UI control menu
User Name：
admin
Password：
admin
After logging in the device, you can see the connection status of the device port.
In the port list,
1. Click the “Connect" to enter the host screen;
2. In the host screen, press the [L_Ctrl] key on the keyboard twice
return to the UI interface.

8 Port /16 Port/24 Port/32 Port User Manual
-18 -
4.1 UI function instruction
No.
Menu
Submenu
Function
1
User
Management
User List
User settings
User Group List
Set user group and user permission.
Modify Password
Set password
2
System
Settings
Network Settings
Set IP address, subnet mask, etc.
Date/Time
Set date and time
Device
Information
Device information settings
Encode
Parameters
Video quality settings
Serial
Serial settings
3
Security
Management
Security Settings
Login and password permission settings
Audit Log
Audit Log
4
System
Maintenance
Backup and
restore settings
Backup, restore, factory settings
Ping host
Test the network connection status with
the host
Device
Management
Upgrade and restart the device

8 Port /16 Port/24 Port/32 Port User Manual
-19 -
4.2 User Management
User management mainly set up for adding, deleting and modifying user& user group, user
password modification, user group permissions and so on. If the user does not have user
management authority, the user cannot access to user management interface. The user in
this section is who have the user management authority.
User List
User list interface: list all registered users, you can see more by page turning
User name or full user name search
Input user name, it shows related users which make it convenient when you have a
large number of users