KinCony KC868-H8w Application guide

KC868-H8w Device User Manual (V0508)
Ⅰ. Software Downloading
Ⅱ. Device Wi-Fi Config Operation
Ⅲ. Remote Controlling Operation
1. Mobile APP controlling man al
2. Comp ter Program controlling man al (WAN mode)
Ⅳ. Local Controlling Operation (LAN mode)
Ⅰ. Software Downloading
1. Use mobile phone to scan the below QR code to download the APP
2. KC868-H8w software ( hone A QR code, C rogram, Vircom Network Tool) downloading link:
www.kincony.com/download/Disk_KC868-H8w.rar
Please download the file to have the software firstly, as elow, it’s default you already have and know them.
Ⅱ. Device Wi-Fi Config Operation (Necessary before any other controlling)
1. Make s re yo r ro ter has the “DHCP” f nction or has opened the f nction
2. To set p the Wi-Fi, one comp ter with Wireless f nction is necessary
3. Power on the device and install the antenna
4. To set the config of Wi-Fi as below steps:
Step 1: Use your computer to connect the wireless network of “ZLAN”

Step 2: Open the “Vircom Network ool” and click 【 Device 】
Step 3 ： Click 【 Auto Search 】 and double click the row
Step 4: Click 【 More Advanced Settings 】

Step 5: Choose “Station” for 【 WIFI Work Mode 】 , Input your router’s name for 【 AP/S A SSID 】
And input your router’s password for 【 AP/S A SSID 】 , then click 【 OK 】
Step 6: Choose “DHCP” for 【 IP Mode 】， and “ UDP ” for 【 Work Mode 】 , keep others unchanging.

Step 7: Click 【 Modify Setting 】 to return, and then re-power on the device
Wait for approx one minute, the device will be online, the other controlling can be operated.
Ⅲ. Remote Controlling Operation
1. Mobile APP controlling man al
1.1 According to the Wi-Fi config set p, it’s necessary to config the Wi-Fi firstly.
1.2 Register
After downloading and installing the APP, Register your account (11 digitals) and password,
(Pls make a note for your password in case forgotten).
1.3 Adding device
Login in, choose 【 Mine 】 - 【 My Room 】 , add floor and room(this step is necessary, please make sure this)

Floor and Room can be renamed randomly, then click 【 OK 】
Choose 【 Mine 】 - 【 Host Manager 】 ,click 【 add 】 ,scan the QR code on the device, and input a name.
Click 【 Add 】 to finish adding device
Click 【 Mine 】 - 【 My Device 】 - 【 Unclassified 】 ,Hold pressing the ICON to choose one room
And give a name for the device.

Hold pressing the number of the relay, the name can be renamed.
Now adding device is completed, the device can be controlled by mobile APP.
1.4 Create Scene Mode
Login in APP, Click 【 Scene 】 — 【 + 】 or 【 Add 】 --Input Mode name ， choose Mode icon ，
ime setting Optional(Function of timing), at 【 Mode setting 】 , input the actions you want to control, click 【 Save 】 ;
see below pic4-2 ， pic4-3 ， pic4-4 ， pic4-5 。
Pic4-2 Add Scene Pic4-3 Add Scene 2

Pic4-4 ime setting (Optional) Pic4-5Mode setting (Actions controlled)
“Mode name” can be named; e.g.: Back Home ， Leaving Home ， Meeting ；
“Mode icon” can be changed ；
“ ime setting” is for timing (optional) ， Pic4-4 ， Repeated time: Monday, uesday, Wednesday and 7:10 am.
Meaning the scene mode is opened at 7:10 am each Monday, uesday and Wednesday.
“Mode setting” is for adding the actions required to control
1. Press ‘Click to add action’, choose KC868H8
2. Press [Enter the ctrl pg],you can set the actions, see Pic4-7
a. Open light1
b. Press the name, it will save the action
3. Press Execute ,you can set Delay time
4. Press ‘Save’
See Pic4-6, Pic4-7 ， Pic4-8 。
Pic4-6 Pic4-7 Pic4-8
II. Inp tting terminals trigger linkage of the scene mode
Set light1 opened successfully
1. Open light1
2. Press the name to
save the action

Click 【 Mine 】 ---- 【 Setting 】 -- 【 Safe set 】 ,Hold pressing 【 input1 】 to left,
he parameters can be modified.
【 Device name 】 : input one name
【 Related scene 】 click to choose one scene mode to linkage
【 Alarm message 】 Input message text sent to mobile(setting message allowed) ；
When inputting terminals are triggered, the phone will receive 【 Alarm message 】 ;
And the actions of the scene mode will be opened.

1 、 urn on the alarm button
2 、 Start 00-23 and Arming
(00-23 means Arming the whole day.
00—08 means Arming from 00:00 to 08:59)
2. Comp ter Program controlling man al (WAN mode)
2.1 Power on the device and connect the internet cable
2.2 The first time to use the program, dou le click to install the ActiveX Installer.
2.3 Then dou le click to open the program and setup the configuration
Step 1: Choose 【 Mode 】 - 【 WAN 】
Step 2: click
【 Control Name 】 - 【 Device Config 】

Step 3: Input Name and Serial Num er of the device, then click 【 Save 】
(Serial Num er is the 24 digitals on the QR code on the device)
Step 4: Choose Controller
2.4 Re-start the program and then choose
【 Mode 】 - 【 WAN 】

Wait for approx one minute, the program can control the device remotely
Ⅳ. Local Controlling Operation (LAN mode)
1.1 According to the Wi-Fi config setup, it’s necessary to config the Wi-Fi firstly.
1.2 Make sure your computer and the device are belonging to the same local internet
1.3 Open the “Vircom Network Tool” , and setup the configuration of the device
Step 1: Click 【 Device 】
Step 2: Click 【 Auto Search 】
Step 3: Click 【 Edit Device 】

Step 4: Choose “TCP Server” for the 【 Work Mode 】， instead of “UDP”
Step 5: Make sure keeping the others unchanging, meanwhile remem er the IP Address and Port
The IP and port will e required as following; you can open the tool and check ack when you forget.
Step 6: Click 【 Modify Setting 】 to finish the setup, then power off the device and power on again.
You may not close the Vircom network tool program in case you want to check the IP and Port.
1.4 The first time to use the program, dou le click to install the ActiveX Installer.
1.5 Then dou le click to open the program and setup the configuration
Step 1: Choose
【 System 】 - 【 Parameter Config 】

Step 2: Input the IP num er and Port num er as remem ered from the Vircom network tool.
Then click 【 Save 】 to return
Step 3: Click 【 Local Control 】 - 【 LAN Connect 】 , 【 Connect OK! 】 is showed at the ottom
Step 4: Click 【 Local Control 】 - 【 Initialization 】 , 【 Initialization completion 】 is showed at the ottom
Step 5: Now you can control the device y the program locally.