kincrome K7802 User manual

Two Drawer Model Number
storage Cabinet K7802
Safety Instructions
These unit should be placed on a level surface.
Evenly distibute the weight on each level and always keep the
heavier loads on the bottom.
Use care when working with metal parts.
To facilitate assembly we recommend having two persons assemble
the cabinet.
One inner hexagonal wrench provided in the accessory package.
Phillps screw driver
Flat screw driver
Rubber mallet
Item Description Q'ty Image Item Description Q'ty Image
①Side panel (right) 1 ⑦Drawer back
panel 2
②Side panel (left) 1 ⑧Drawer front
panel 2
③Bottom panel 1 ⑨Drawer bottom 2
④Back panel 1 ⑩Drawer side panel
(right) 2
⑤Middle panel 1 Drawer side panel
(left) 2
⑥Top Panel 1
a Screw 12 g Screw
(M4*15) 16
b Cam 14 h Bolt 4
d Foot 4 i Handle 2
e Wooden dowel 14 k1 Clip 4
f Metal dowel 14 k2 Screw
(M3*16) 4
Required Tools
Accessory
Part List (Notice: Small lable with item# on each parts)

Assembly Instructions
Step 1 ② ⑤ ①
Assemble Middle Panel:
Push in 2*(e) Wooden dowel in the side panels.
Screw 2*( f ) Metal dowel in the side panels, make sure all the 2*(e)
dowels are in the holes of the side panels. 2*(f )
Assemble Bottom Panel: push in 4*(e) Wooden dowel in the 2*(b)
bottom panel, then screw the 4*(a) from the bottom to connect
the bottom panel and the two sides panels. 4*(e)
4*(a)
③
Ste
p
2
Insert the back panel into the slots of the side panels and the
bottom panel,
④
Ste
p
3 ⑥
Assemble Top Panel: Screw 4*( f ) Metal dowel in the top
panel, and push in 4*(e) Wooden dowel, lay the top panel
onto the 2 sides panes and back panel, make sure all the 4*(f )
dowels are in the holes of the side panels. Then put the cams 4*(e)
4*(b) in the 4 holes and turn the cams clockwise to lock. 4*(b)

Assembly Instructions
Step 4
Screw the foot cover from the foot (d) and fix it on the
bottom panel with 4*(g) screws, turn the screws until tight to
lock the place.
Then screw the foots into the covers.
4*(d)
Repeat the step to assemble the other three foot.
Step 5
⑦ ⑨ ⑩
Assemble the drawer: insert the drawer bottom panel into
the slots of the side panels and the back panel.
screw the 4*(a) to connect the back panel and the two
drawer sides panels.
Push in 2*(e) Wooden dowel in the drawer front panel ⑧.
Screw 4*(f ) Metal dowel in the drawer front panel , then put
the cams 4*(b) in the 4 holes of the side panels and turn the
cams clockwise to lock.
Assemble the handles: Using 2*(h) screws attach
drawer handle ( i ) to outside drawer front panel.
Repeat the step to assemble the other drawer.
⑧
Step 6
Install the two drawers assembly to the two sides panel
mounts.
Step 7 4*(k1)
Enhance the cabinet by adding four clips in the back
panel.
Fix the clips 4*(k1) in the conners by 4*(k2), turn the screws
until tight to lock the place.
4*(k2)
4*(a)
4*( f )
4*(b)
1*( i )
16* (g)
2*(e)