kincrome K7803 User manual

Two Door Model Number
Wall Cabinet K7803
Safety Instructions
These unit should be placed on a level surface.
Evenly distibute the weight on each level and always keep the
heavier loads on the bottom.
Use care when working with metal parts.
To facilitate assembly we recommend having two persons assemble
the cabinet.
Phillps screw driver
Flat screw driver
Rubber mallet
Item Description Q'ty Image Item Description Q'ty Image
①Side panel (right) 1 ⑥Door with logo
(right) 1
②Side panel (left) 1 ⑦Door (left) 1
③Bottom panel 1 ⑧Shelf 1
④Back panel 1 ⑨Top spanner 1
⑤Top panel 1 ⑩wall cleat 1
b Cam 15 h Bolt 4
c Hinge 4 i Handle 2
e Wooden dowel 8 j Bracket 4
f Metal dowel 15 k3 wall anchor 2
gScrew
(M4*15) 24
Part List (Notice: Small lable with item# on each parts)
Required Tools
Accessory

Assembly Instructions
Step 1 Front View:
8*( f )
Screw 8*( f ) Metal dowel in the side panels, and push in
4*(e) Wooden dowel at the bottom of the side panels.
Insert the back panel to the slots of the side panels and bottom
panels. Make sure the top and the bottom are in the same level.
② ①
Then put the cams 4*(b) in the holes of the top spanner.
and turn the clockwise to lock before the side panels fixed.
The bevel edge of the spanners face down. 4*(e)
Put the cams 4*(b) in the holes of the bottom panel,
push the bottom panel slightly and make sure it is on the place,
and turn the clockwise to lock before the side panels fixed. 8*(b) ④ ③
Back View: ⑨
Step 2 Front View: ⑤
Assemble Top Panel: Screw 7*( f ) Metal dowel in the top 7*( f )
panel, and push in 4*(e) Wooden dowel, lay the top panel 4*(e)
onto the 2 sides panels and top spanner, make sure all the
dowels are in the holes of the side panels. Then put the cams
7*(b) in the 7 holes and turn the cams clockwise to lock.
7*(b)
Back View:

Assembly Instructions
Step 3
Assemble the two doors: Set hinges(c) into the doors, 4*(c)
using a screwdriver, turn the 2*(g) screws in the hinge 24*(g)
until tight to lock the place. Lift door to side panel and
set top hinge into the hinge mounting plate, assemble
⑦ ⑥
of the doors are in the same level).
Assemble the two handles: Using 2*(h) bolts attach
the handle ( i ) to outside doors.
1*( i ) 2*(h)
Step 4
Insert the shelf bracket 4*( j ) into the determined place,
take the shelf ⑧on the bracket.
⑧ 4*( j )
Step 5
⑩
Use wall anchor 2*(k3) to fix the two board on the wall,
The bevel edge of the the wall cleat face up, and make sure
the board is in level.
Test the strength before you hang the cabinet on the wall
cleat.
Hange the cabinet on the wall until the top spanner insert
into the cleat.
the hinge with 4*(g) screws. Repeat for bottom hinges and
opposite side door (make sure the bottom and the top