King Pigeon S3622 User manual

Takeaphoto
ofintruderto
yourmobile
p
hone!
UserManual
S3622
Ver 1.10
Date Issued: 2008-04-18
All rights reserved by King
Pigeon Hi-Tech.Co.,Ltd.
www.GSMalarmsystem.com

GSM MMS Alarm System

Http://www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page １of 17 Ver 1.1 File No.: 36220010
Table of contents
1. Brief introduction ------------------------------------2
2. Standard Packing list ------------------------------2
3. Physical Layout -------------------------------------2
4. Functions and Features ---------------------------4
5. Installation --------------------------------------------5
6. Settings -----------------------------------------------9
7. Operating Instructions ----------------------------13
8. Technical specifications --------------------------14
9. Important information -----------------------------14
10. Maintenance-----------------------------------------15
11. Quality Warranty -----------------------------------15
This handbook has been designed as a guide to the installation and operation of
S3622 GSM MMS Security Alarm System.
Statements contained in the handbook are general guidelines only and in no way
are designed to supersede the instructions contained with other products.
We recommend that the advice of a registered electrician be sought before any
Installation work commences.
King Pigeon Hi-Tech.Co., Ltd, its employees and distributors, accept no liability
for any loss or damage including consequential damage due to reliance on any
material contained in this handbook.

Http://www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page ２of 17 Ver 1.1 File No.: 36220010
1. Brief introduction
The S3622 is designed for house, station and office applications. It based
on GSM Communication network and IR Cameras. When any sensor
triggered, it will send the photo to users cellphone through GPRS. Also, if
the user want to require a photo, he can send a command to the S3622,
Then it will reply a photo immediately.
The S3622 equips 2 Output relays, it can remotely control the other
electrical appliances directly.
What you need is a SIMCard which support MMS function.
2. Standard Packing List:
Control UnitX1
CCD IR Camera X1
Remote contol X2
Wireless PIR Motion Sensor X1
Wireless Door magnetic Switch X1
GSM Antenna X1
AC/DC AdaptorX1
User Manual X1
Optional Accessories:
Combined Light and Siren
PIR Motion Sensor
Glass Break Sensor
Magnetic Window Sensor
Magnetic Steel Scrolling Door Sensor
Infrared Beam Fence
3. Physical Layout
3.1 Control Unit physical layout

Http://www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page ３of 17 Ver 1.1 File No.: 36220010
Out 1 Output Relay 1, when it flash, means the relay 1 close.
Out 2 Output Relay 2, when it flash, means the relay 2 close.
Out 3 Reversed for furture
Signal Control Unit Status.
1. Power on it, Led will on for 20S then starting to register
the GSM Network, 20S later the LED color will change
to Orange, means reading the SIMCard;
2. In armed mode, the Led will flash green color;
3. In disarmed mode, the Led will continue green color;
4. When triggered, the Led will flash red color.
3.2 Pinouts for 15PIN DB type connector

Http://www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page ４of 17 Ver 1.1 File No.: 36220010
4. Functions&Features
1) Tri_band 900/1800/1900MHZ;
2) 2 Output relays, (10A 220VAC; 10A 30VDC)which can remotely control
other electrical appliances;
3) 3 Wired zones and 8 Wireless Zones;
4) Can arm or disarm by SMS or remote control;
5) Equiped with CCD camera with infrared led;
6) Automaticed send SMS Alert to pre-set cellphone when it triggered;
7) Automaticed dial Pre-set alarm phone numbers when it triggered;
8) Automaticed send Photo to pre-set cellphone by GPRS when it
triggered (MMS alarm);
9) Supports up to 8 pcs wireless sensors, each sensor can be named by
user;
10) Supporst 5 alarm telephones;
11) Supports SMS Commands to require photos at anytime;
12) Supports SMS Commands to set the system;
13) Supports wiretap through internal Mircophone;

Http://www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page ５of 17 Ver 1.1 File No.: 36220010
14) The IR Camera supports Motion detection funtion;
15) Standby internal rechargeable battery which can last 12 hours;
16) Adjustable photo size, optional size rang is: 160×128, 320×240, 640×
480;
17) More programmable, e.g.: if send SMS, or turn on Siren or dial preset
alarm number and so on;
18) Based on the GSM communication network and GPRS Communication
technology, apply to wide range situations.
19）Send email to pre-set Email address.
5. Installation
5.1 Insert SIM into Control Unit
Press the orange button near the SIM Card Solt by a small screw or other
material, the SIMCard slot will out. Then fix the SIMCard to it properly and
put it into the SIMCard slot.
5.3 Install the Antenna on the Control Unit
Install the GSM Antenna to the ANT Connector,The Antenna serves to
provide a strong GSM signal.
5.4 Install the Magnetic door/window sensors
Magnetic door/window sensors signal the Control Unit when the two parts
separate by more than between 1.5 to 3.0cm.

Http://www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page ６of 17 Ver 1.1 File No.: 36220010
In some circumstances an Infrared beam fence is more appropriate than
magnetic sensors. i.e. veranda, picture window balcony, boundary wall
e.t.c.
Wired or wireless glass break sensor can also be used (see below)
For a Scrolling Steel Door, a special Wireless Scroll Steel Door magnetic
sensor, must be used due to interference of the wireless signal caused by
the steel door.
Installation: attach the larger half to the floor and attach (rivet or glue) the
smaller half to the scroll steel door. An alarm is triggered when the halves
are separated by more than three to 5.00 cm.

Http://www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page ７of 17 Ver 1.1 File No.: 36220010
ScrollSteelDoor
5.5 Install the wireless PIR Motion Sensor
The PIR sensor will detect a person since human temperature is different to
ambient temperature. When triggered, the PIR will signal the Control Unit.
Apply the detection area illustration below when installing.
Wireless curtain sensor, detection area illustration below:

Http://www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page ８of 17 Ver 1.1 File No.: 36220010
5.6 Install other sensors
For smoke, you can use wireless smoke sensor, for gas leakage detection,
you can install gas leakage sensor below
For temperature, you can install the temperature sensor below:
5.7 Install the Control Unit
In order to avoid destruction of the Control Unit by intruders, please install it
in a concealed location, convenient to the operator.
If applicable, ensure that an uninterruptible AC power outlet is available
near the Control Unit. First connect accessories to the Control Unit then the
AC adapter.
5.8 Siren and the intercom
Connect the Siren and the intercom to the Control Unit and fix them in
appropriate locations .

Http://www.GSMalarmsystem.com
King Pigeon Hi-Tech. Co., Ltd. Page ９of 17 Ver 1.1 File No.: 36220010
Light&Siren Siren Intercom
5.9 Install the IR Camera
The best detect range of the IR Camera is 3~6meters, the longest distance
is 35meters, please help to install the IR Camera in the properly position.
The IR Camera can work in day or night. In night, the IR will work.
5.10 Connect the Electric appliances
The S3622 supports two output relays, they can connect to the electric
appliances, like air conditions, gate, lights. You can connect the two wires
to the Output relay 1 or 2 is ok. The uutput relays like the switcher, switch
on or switch off by call or SMS Commands.
6. Settings
6.1 Set up the Control Unit password.
The factory original Password is 123456. Everytime when you re-set the
system, you should set the MMS and change the language, the default
setting is China Mobile Ltd and the language is Chinese, and the deflaut
password is 123456.
The S3622 can be set by SMS or call the SIMCard. The commands please
help to see the below table.
Commands Functions Example
1#1# Arm Want to arm the
system, Edit a
SMS :123456#1#1# .
Then send to the
Control Unit, the