King Young S685FG3 User manual

Barebone System Unpacking Guide
Install CPU and CPU Cooler
Install Memory
Complete
INSTALLATION GUIDE
1
2
3
Release the CPU socket lever and lift the metal frame
of the CPU socket
Remoe the CPU socket cover. Be aware do not touch
any pins in the CPU socket.
Put the CPU to the socket. Align the CPU notches with
the socket alignment keys and gently put the CPU onto
the socket.
1
2
Insert SODIMM into the SODIMM slot
on the motherboard by 30 .
0
Push down the SODIMM.
SODIMM
SODIMM Slot
2
Specifications are for reference only and subject to change without notice.
1
When CPU is properly seated, replace the metal
frame and push the CPU socket lever back to its
locked position.
4
5Glue the heatsink compound on the CPU surface.
Install CPU heatsink on top of CPU. Tighten CPU
heatsink with four screws into pillaret.
M1685FG3
Item Checklist
Power Adapter
Power Cord
Specifications are subject to change
without notice, just for reference only
.
Mainboard Layout
Installation
Guide
SILICONEHEAT
SINKPASTE
SILICONEHEAT
SINKPASTE
INKPAS
Install Guide
CD
Heat-sink
Accessory
Pack
PU Sponge
System Unit
1
1
2
Loose the screws on the rear panel
from the case.
Pull out the mainboard from the case.
1
2
1
R1 GigaLAN Port
R1 GigaLAN Port
R2 Two USB 3.0 Ports
R2 Two USB 3.0 Ports
R3 PS/2 Keyboard and Mouse Ports
R3 PS/2 Keyboard and Mouse Ports
R4 COM 1
R4 COM 1
R5 DVI-I Port
R5 DVI-I Port
R6 DC 12V Power In
R6 DC 12V Power In
R7 Line-Out Audio Port
R7 Line-Out Audio Port
R8 DP (Display Port)
R8 DP (Display Port)
F1 Mic-In Phone Jack
F1 Mic-In Phone Jack
F2 Power Button
F2 Power Button
F3 Reset Button
F3 Reset Button
F4 Three GigaLAN Ports
F4 Three GigaLAN Ports
F5 Four USB 3.0 Ports
F5 Four USB 3.0 Ports
Standard S685G3 Front IO Ports
1 Secondary COM Port Header
1 Secondary COM Port Header
2 CPU Socket
2 CPU Socket
3 Optional Riser Card Slot
3 Optional Riser Card Slot
4 Intel Giga LAN Chip
4 Intel Giga LAN Chip
5 SODIMM Slots
5 SODIMM Slots
6 Intel Q87 Chip
6 Intel Q87 Chip
7 Super IO Chip
7 Super IO Chip
8 CPU Cooling Fan Power Connector
8 CPU Cooling Fan Power Connector
9 CMOS Battery
9 CMOS Battery
10 SATA Cable Connector
10 SATA Cable Connector
11 SATA Power Connector
11 SATA Power Connector
12 SATA HDD Connector
12 SATA HDD Connector
13 Buzzler
13 Buzzler
Standard S685G3 Rear IO Ports
2
9
12
10
11
8
7
13
4
6
5
3
1
R8 R7 R6 R5 R4 R3
R1
R2
F5 F4 F3 F2 F1

Part List
DVD-ROM Drive Screws (* 5)
Case Screws (* 2)
K
H
EMI Sticker (*2)
Rubber Stand (*4)
J
L
I
M1685FG3
CPU Cooler Screws (*4)
M
Accessory Pack
DVD-ROM Drive
Bracket
A
B
C
D
2.5" HDD Screws (* 5)
E
COM/DVI Screws (* 6)
Front Panel
Rear Panel
Case
N
CPU Cooler Paste (* 1)
T
SINK PASTE
SILICONE HEAT
SINK PASTE
INK P
AS
INSTALLATION GUIDE
Mainboard
F
CPU HeatSink
G
Hardware Installation
STEP 1 STEP 3
The system uses entire case for
partial heat dissipation, so the
normal operating temperature
of the case is between 45 C ~ 55 C.
Specification is subject to change without notice,
it is for reference only.
Install Case
Install mainboard into the case.
1
Tighten rear panel with screws on the case.
2
L
F
1
Complete Memory
Complete CPU
and Heat Sink
2
G
Install Slim HDD
J
2
3
180
0
Turnover the Mainboard.
2
3
B
HDD
1
1Install HDD attach to Drive Adapter.
**Notice:The HDD's label side is up.
Tighten HDD with screws to the Mainboard.
Install DVD-ROM Drive
DVD-ROM drive
B
H
K
Paste EMI Stickers to the top of the DVD-ROM drive.
Connecting onboard SATA cable to the DVD-ROM drive.
1
3
2
3
2
1
Tighten DVD-ROM drive with screws to the DVD-ROM
drive braket.
2
Complete System
POWER
RESET
STEP 2