Juicing
1. Before using, please confirm the button switch of the main machine in stop state, in
this way, in case assembly is not completed, starting the main machine can be avoided,
so unnecessary damage for persons or property avoided.
2. Before juicing, first confirm juicing net and rotor clutched in position, and no hard
contact between juicing net cutter and transparent cover. Put the transparent cover on,
put the handle into the cover slot, then turn on the machine.
3. For using, assemble according to the diagram of "name and position of main
components". Turn on power supply, press switch to let the machine run no-load for 5
sec. Put prepared vegetable or fruit into feed port of the juicer, press with the pushing
bar, evenly, hard and slowly, juice of the vegetable or fruit can be found, original, fresh,
good for health.
4. Note: when pressing food with the pushing bar, force shall be even or indirect,
pressing force shall not be more than 1 kg, no too sudden force, otherwise, juicing effect
will be reduced.
Operating time
This machine is designed with button switches of O grading, I grading, II grading (O for
stop, I for weak grading, II for strong grading). For juicing, select strong grading, for
operating time, after operating for 1min, stop for 1min, then use again. After the above
operation is performed for three times, stop for 15 min, do not operate until the motor is
cooled, in this way, service life of this machine will be prolonged, the machine will serve
you more efficiently.
Attentions
1.This machine is unavailble for the weakness, unresponsive or psychopathic perosn
(including children), unless under the direction or help from the person who have the
responsibility for security. Children should be overseen, so it can be testified that they
are not playing with it.
2. Before using, put this machine on a stable and even table board, operate according
to the above methods.
3. Before juicing, first confirm juicing net and rotor clutched in position, and no hard
contact between juicing net cutter and transparent cover. Put the transparent cover on,
fasten tight the handle, then turn on the machine.
4. Before being used, the motor works in running-in phase, there may be slight peculiar
smell and spark, this is normal, after the motor works for some period, the above
phenomenon will disappear.
