3
Copyright © 2013 KingdyTechnolog yInc. All Rights Reserved. DP-2L Series
Safety Instructions
9. Servicing:Do notattemptto service this equipment
yourself as opening or removing covers may
expose you to dangerous voltage or other hazards.
Refer allservicing to qualified service personnel.
10. Damage Requiring Service:Unplug this equipment
from the outlet and referservicing to qualified
service personnel under the following conditions:a)
if the power cord or plug is damaged; b) ifliquid has
penetrated into the equipment; c) ifthe equipment
has been exposed tomoisture;d) ifthe equipment
does notwork well, or you cannot getit to work
according to the user’s manual;e) ifthe equipment
has been dropped and damaged; f) ifthe equipment
has obvioussigns ofbreakage.
11. Do notleave this equipmentin an environment
where thestorage temperature is below -10°C or
above 70°C. Itmaydamage the equipment.
12. Do notopen the sealed enclosure /case of
equipment. Once enclosure is disassembled without
approval,itwill lead in abnormal operating of water
proofgel. For Guarantee of water prooffunction,
please makesure configuration /peripheral has
been confirmed to install beforeshipping.
1. Read Instructions:All the safetyand operating
instructions should be read before the equipmentis
operated.
2. Retain Instructions:The safetyand operating
instructions should be retained for future reference.
3. Cleaning:Unplug this equipmentfrom the outlet
before cleaning.Do notuse liquid cleaners or
aerosol cleaners.Use a damp cloth for cleaning.
4. Water and Moisture:Do notuse this equipment
near water.
5. Ventilation:The openings on the enclosure are
provided for ventilation to ensure reliable operation
ofthe equipmentand to protectit from overheating.
These openings should never be blocked.
6. Power Sources:This equipmentshould be operated
onlyfrom the type ofpower source indicated on the
rating label.If you are notsure of the type ofpower
supply,consult your dealer or local power company.
7. Heed Warnings:All warnings on the equipmentand
in the operating instructions should be adhered to.
8. Objectand Liquid Entry: Never push objects of any
kind into this equipment through openings as they
maytouch dangerous voltage points or shout-out
parts that could resultin a fire orelectricshock.
Never spill liquid of anykind on the equipment.
