KINGJOY G22C User manual

English
1 – 13
Čeština
14 – 27
Slovenčina
28 – 41
Magyar
42 – 55
Deutsch
56 – 69

G22C & G55C
Tripod User’s Guide
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
✉www.alza.co.uk/kontakt
✆[phone]
Importer: Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
1

1Tripod Details
1) Twist Lock Tripod
Head
Angle adjustment
button
Twist locks
Center col
umn
Counter-
weight
hook
Detachable leg
C
amera screw
C
enter column
twist
lock
Loading plate
2

2) Flip Lock Tripod
Head
Angle adjustment
button
Twist locks
Center coulmn
Counter-weight
hook
Foldable leg
Camera screw
Center column
twist lock
Loading plate
3

2How to use the angle adjustment button
1) Flip lock tripod: Pull out the angle adjustment button to adjust the different
angle, to make sure the pulled back after selected desired angle.
4

2) Twist lock tripod: Press the angle adjustment button to adjust the angle. (Hight
angle, middle angle, low angle)
3) 180 degree folding tripod
5

3How to use the Center Column
Twist the lock clockwise to lock the center column. Twist the lock counter-clockwise to
release the center column and adjust the height freely
6

4Extend and Fold the Leg
1) Twist lock type: turn the twist lock to release, lock the leg, adjust the leg, or move
the height freely
2) Flip lock type: open the flip lock to release, pull the leg to the desired height and
lock the leg
1
2
7

5Spring Hook
The spring hook is for hanging sandbags or backpacks to enhance stability of the legs.
8

6How to exchange the tripod mode to monopod mode
Rotate the detachable leg with foam clockwise to remove it. At the same time, remove
the spring hook as shown below and remove the center column.
Connect the detachable leg and center column together for it to become a monopod, as
shown below.
9

7Head Details
¼ Camera
Quick release
plate
Level
Level
Quick release
knob
Ball locking
knob
Panning knob
360° Panoramic
base
10

8Mount Ballhead and Camera
1) Mount the ballhead onto the tripod and rotate clockwise until it is tightened.
2) To install the camera onto the quick-release plate, pull the ring of the screw and
mount the plate to the threaded hole on the base of the camera until it is
tightened.
3) Mount the camera on the ballhead clamp. The plate can be locked by rotating the
quick-release knob clockwise.
9Ballhead Operation
1) To unlock the ballhead, rotate the main locking knob counter-clockwise. To fix the
camera at desired position, rotate the locking knob clockwise to tighten it.
2) To unlock the ballhead base, rotate the panning knob counter-clockwise. To fix
the base at desired position, rotate the panning knob clockwise to tighten it.
11

10 Warnings
Do not exceed the tripod’s maximum load capacity.
Ensure the ballhead is locked.
Do not operate this tripod when the temperature is below
-20° C or above 70° C. It is not recommended to operate it
saltwater.
Do not put this tripod in sunlight or lean it in dangerous place.
Do not leave this tripod unattended in public place;
please be careful when you use it in a dangerous place.
Remove the camera from the ballhead during setup or
transport.
It is not necessary to equip lubricant. Please use standard
lubricant or grease when necessary.
For your safety, keep it out of power supply.
12

11 Warranty Conditions
Anew product purchased in the Alza.cz sales network is guaranteed for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
•Using the product for any purpose other than that for which the product is intended
or failing to follow the instructions for maintenance, operation and service of the
product.
•Damage to the product by a natural disaster, the intervention of an unauthorized
person or mechanically through the fault of the buyer (e.g. during transport, cleaning
by inappropriate means, etc.).
•Natural wear and aging of consumables or components during use (such as
batteries, etc.).
•Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes such as used power
supplies, etc.
•If anyone has made modifications, modifications, alterations to the design or
adaptation to change or extend the functions of the product compared to the
purchased design or use of non-original components.
13

G22C & G55C
Uživatelská příručka stativu
Vážený zákazníku,
děkujeme Vám za zakoupení našeho produktu. Prosíme, pečlivě si přečtěte následující
instrukce před prvním použitím a uživatelskou příručku si uschovejte pro pozdější užití.
Zejména dbejte na bezpečnostní pokyny. Pokud máte jakékoliv dotazy či připomínky
ohledně přístroje, prosíme, obraťte se na zákaznickou linku.
✉www.alza.co.uk/kontakt
✆[phone]
Dovozce:
Alza.cz a.s.
Jankovcova 1522/53
Prague 7
www.alza.cz
14

1Popis stativu
1) Stativ s otáčivým uzamykáním
Hlava
Tlačítko nastavení
úhlu
Otáčivé uzamykání
Středový sloup
ek
Hák
na
protizávaží
Odnímatelná noha
Závit na
k
Otáčivé uzamykání
středového sloup
ku
Nakládací deska
15

2) Stativ s odklopným uzamykáním
Hlava
Tlačítko nastavení
úhlu
Odklopné uzamykání
Středový sloupek
Hák na
protizávaží
Sklopná noha
Závit na
k
Otáčivé uzamykání
středového sloup
ku
Nakládací deska
16

2Jak používat tlačítko nastavení úhlu
1) Stativ s odklopným uzamykáním: Pro změnu úhlu vytáhněte tlačítko pro
nastavení úhlu. Pro zajištění vybraného úhlu zatlačte tlačítko zpět.
17

2) Stativ s otáčivým uzamykáním: Stiskněte tlačítko pro nastavení úhlu. (Vysoký úhel,
střední úhel, nízký úhel)
3) Stativ se 180 stupňovým složením
18

3Jak používat středový sloupek
Otočením zámku ve směru hodinových ručiček uzamknete středový sloupek. Otočením
zámku proti směru hodinových ručiček uvolníte středový sloupek a volně nastavíte
výšku.
19