KINGrinder K4 User manual

KINGrinder Manual
Exterior Adjustment of K4 and K6 Hand Coffee Grinder
How to operate the grinder?
1. Rotate the adjustment nut for the desired grind setting.
2. Take out the handle and PC lid, load 30~35g of coffee beans into it.
3. Put on the handle and PC lid then spin the handle clockwise till it has done.
How to install the PC lid? (There are method A and method B)
A. Default setting: the PC lid and
handle are separate-able for
grinding (drill-grinding is
applicable).
B. Attach the PC lid and handle:
Take out the Black O-ring -
Place the White O-ring into the
groove.
How to adjust the grind setting?
1. Gently rotate the adjustment nut clockwise to zero.
The corresponding number is zero and the number
on the adjustment nut may not be the same as the
number of clicks from the grind setting.
2. Rotate the adjustment nut anti-clockwise from zero to your grind size.
3. Rotate the adjustment nut anti-clockwise for a coarser grind and vice versa.
K4
K6
Extra Fine
15~50
15~25
Fine
50~60
25~60
Medium-Fine
60~90
Medium
90~120
Coarse
150

How to disassemble the grinder?
1. Rotate the adjustment nut anti-clockwise for a coarser grind before
dismantling the grinder.
2. Hold down the burr set with a hand and remove the circlip with another
hand.
3. Take out the components in order. The burr set (attached with the central
shaft), the bearing cover and the spring from the burr set. Then the top
bearing cover and the top bearing from the above.
How to assemble the grinder?
1. Put on the components in order. The spring and the bearing cover and
then put the burr set back to the grinder.
2. Hold down the burr set with a hand and put on the top bearing and the top
bearing cover. There are two shapes of the top bearing cover: flat design
and curve design. The curve design shape of the top bearing cover faces
upward.
3. Slide the circlip onto the curve design shape of the top bearing cover with
another hand.
What’s to do and not to do?
●Cleansing with a brush.
●Don’t wash the grinder with water.
●Don’t disassemble the burr set unit and the adjustment nut.
●Don’t rotate the adjustment nut when the grinder is on zero setting.
@: [e-mail]
Website: www.kingrinder.com
Instagram: KINGrinder
Linktree: KINGrinder