HOW TO CLEAN THE GRINDER?
1. Take out the receiver and put the handle on the grinder.
2.Hold the handle, and rotate the spin dials counterclockwise till it is completely
rotated down.
3.Take the components out. ( Showed as the pictures.)
4.Use the air blower and the brush to clean the residue coffee powder.
5.To reassemble the components in sequence.
PRECAUTIONS:
1. The entire grinder should not be washed water. Please use the provided brush
or air blower for cleaning.
2. Please do not turn the handle when the scale is at zero or when its below 8
clicks, as this could cause damage to the burr.
3. For precision reasons, the exterior burr and the central axis should not be
dismantled. Do not forcefully disassemble using tools.
4. Please refrain from grinding items other than coffee beans. Additionally, do
not grind unroasted beans that have not undergone the roasting process.
5. The products outer casing is made of molded plastic and may have seams and
slight traces, which are normal occurrences.