KitchenAid KSB1575 Operating instructions

Diamond Blender Troubleshooting
KitchenAid Diamond Blender Troubleshooting
Blender does not operate when a setting is selected
No indicator lights are lit.
Check to see if the Blender is plugged into a grounded
3-prong outlet. If it is. press POWER: then unplug the
Blender. Plug it back into the same outlet, and Press
POWER. If the Blender still does not work, check the
fuse or circuit breaker on the electrical circuit the Blender
is connected to and make sure the circuit is closed.
https://producthelp.kitchenaid.com/Countertop_Appliances/Blenders/Blender_Tips_and_Tricks/Diamond_Blender_Troublesho…
Updated: Wed, 19 Aug 2020 13:52:47 GMT
Powered by
1

All indicator lights are flashing at the same time.
If Blender is plugged in, but nothing happens when
POWER is pressed, and all indicator lights are flashing,
the motor rotor may be locked. Press POWER; then
unplug the Blender. Plug it back in; then press POWER
and select the desired speed.
One indicator light is flashing alternately.
If the Blender is plugged in, but will not start and one
light is flashing alternately from all the other indicator
lights, the Blender may have a stuck key. Press POWER
to turn off the Blender; then unplug the Blender. Plug the
Blender back in and press POWER to turn back on to
reset the stuck key.
Blender stops while blending
All indicator lights are flashing at the same time.
The Blender may be overloaded. If the Blender becomes
overloaded when blending heavy ingredients, it will
automatically shut off to avoid damage to the motor.
Press POWER to reset the Blender and unplug the
power cord. Remove the pitcher assembly from the base
and divide contents into smaller batches. Adding liquid to
the pitcher may also reduce the load on the Blender.
https://producthelp.kitchenaid.com/Countertop_Appliances/Blenders/Blender_Tips_and_Tricks/Diamond_Blender_Troublesho…
Updated: Wed, 19 Aug 2020 13:52:47 GMT
Powered by
2

All indicator lights are flashing alternately.
The Blender may be jammed. If it is jammed, the
Blender will stop running to avoid damage to the motor.
Press POWER to reset the Blender and unplug the
power cord. Remove the pitcher assembly from the base
and, with a scraper. free the blades by breaking-up or
removing the contents at the bottom of the pitcher.
Why is my blender blade turning but not mixing the ingredients?
Occasionally, when blending, the ingredients get stuck above the blade. This is called "bridging". When this occurs, the
rpm of the blender increases very quickly and the ingredients stop mixing as the blade is just turning in a pocket of air
inside the ingredients.
What to do:
Stop the blender and use a spatula to tamp down to "pop the bubble". You can also use a slower speed or use a bit
more liquid to get the viscosity or thickness of the mix to come down.
Blender Lights Flashing
CLICK HERE for information and troubleshooting on flashing lights for various models.
Blender Jar Difficult to Attach or Remove
If your blender jar has become suddenly difficult to attach or remove without great force, please Contact Us.
Oily Residue on Bottom of Jar
There are bearings in the blender that allow it to run smoothly and quietly. It is normal that as the blender is used, you
may see residual oil from the bearings on the bottom of the blender jar. This oily residue can be wiped clean. It is more
noticeable on clear blender jars.
If these suggestions did not help, please Contact Us or visit our Service Locator.
If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.
https://producthelp.kitchenaid.com/Countertop_Appliances/Blenders/Blender_Tips_and_Tricks/Diamond_Blender_Troublesho…
Updated: Wed, 19 Aug 2020 13:52:47 GMT
Powered by
3