Kitsound EUPHORIA User manual

USER MANUAL
WARNING: To prevent possible hearing damage, do not listen at high volume levels for long periods.
For your own safety, please be aware of your surroundings when using these earphones.
Your product and batteries must be recycled or disposed of properly.
Please contact your local recycling centre for more information on proper disposal.
© 2013 CSR plc and its group companies. The aptX®mark and the aptX logo are trade marks of CSR plc or
one of its group companies and may be registered in one or more jurisdictions.
All trademarks are acknowledged as the property of their respective owners. Unless otherwise stated their use
does not imply that the trademark owner is aliated with KitSound or endorses the products herein.
JB. 4336 / Made in China. © KitSound™ 2016. Christchurch, Dorset, BH23 4FL, UK
EUPHORIA
blUEtOOtH EARPHONES

We are craftspeople. We are musicians. We are KitSound™
And we all commit ourselves to achieving one shared goal:
Bringing people closer to their music. By truly understanding
music we stay true to its craft. Pure, rich, incredible sound.
We’ll settle for nothing less.

At KS we believe your music deserves to be showcased on great
quality products that don’t cost the earth. We might not all share
the same taste in music (the ferocious disputes on music forums
prove that), but whether it’s Irish folk, death metal or any number
of obscure genres which seem to be multiplying by the minute, the
artists responsible for connecting with you through their craft have
bared their souls to do so. And we think that’s worth celebrating.

6 7
Please read this manual carefully before use.
Box contents
• KS Euphoria Bluetooth earphones
•USB charge cable
•Fitting kit
•Carry case
•User manual
Functions*
1. Volume+ / Next track
2. Play / Pause / Power
3. Volume– / Previous track
*Note: Button commands may vary depending on your device
1
2
3
Instructions for use
Charging the battery
1. Connect the micro USB end of the charging cable to the charging port and the standard USB end to a PC USB port
or USB mains charger
2. The LED indicator will be green whilst charging. It will turn o after around 2-3 hours. The battery is now fully charged
Note: The rst charge may take 4-5 hours.
Bluetooth setup
Pairing a Bluetooth device
1. Start by holding the power button down for 4 seconds. You will see the green LED indicator ash rapidly and
then enter pairing mode
2. Activate the Bluetooth feature on your device and search for Bluetooth devices (check your device’s manual
if you’re unsure how to do this)
3. Select ‘Euphoria’ from the list of found devices
4. If asked for a passcode, enter ‘0000’ or ‘1234’ and the headphones will then be connected to your device
5. After pairing successfully you will hear a tone; you can then answer the phone or listen to your music
6. The next time the headphones are switched on, they will automatically search for and attempt to connect
to the last paired device
[continued...]

8 9
Re-pairing or pairing new devices
1. Make sure the Bluetooth is turned o on any previously paired devices
2. Follow the ‘Pairing a Bluetooth device’ instructions from step 1
Call-handling
Answer a call When a call comes through press the middle power button to answer
Holding down that button for 2 seconds will refuse that incoming call
Re-dial Whilst not in a call, tap the middle power button twice to redial the last number you called
Playing music
Play/Pause Press the middle button on the remote when music is playing on your device
Adjusting the volume Press the volume + or – buttons to control the volume, you will hear a tone at minimum
and maximum. The volume can also be adjusted on your device
Music selection Hold down the + or – buttons, you will hear a tone when the track changes
[...continued] Bluetooth setup Care for your Euphoria Bluetooth
Please DON’T:
• Get the Euphoria Bluetooth wet
• Open up the Euphoria Bluetooth. There are no user serviceable parts inside
• Expose the Euphoria Bluetooth to extreme temperatures or rapid changes of hot to cold or vice versa
Please DO:
• Clean the Euphoria Bluetooth with a soft dry cloth and no detergents
Specications
Bluetooth V4
Bluetooth range up to 10 m
Frequency response 20 Hz – 20 kHz
Talk time up to 4.5 hours
Play time up to 5 hours
Standby time up to 60 hours
Battery type 3.7 V Li-Polymer, 70 mAh, rechargeable

10 11
We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement
and development.
Troubleshooting
•If you cannot connect the headphones to your device, please try the following:
– Ensure that the headphones are charged, switched on, paired with and connected to your device
– Check the headphones are within 10 metres (30 feet) of your device and that there are no obstructions
(such as walls or other electronic devices) between the headphones and the device
– Only one device may be paired to these headphones at a time, so please ensure there are no conicting
Bluetooth devices trying to connect to the headphones
• If the headphones will not switch o, they can be reset back to normal by putting them on charge
•If you receive an intermittent signal, please ensure the headphones are fully charged before continuing use
•If you do not use the headphones for longer than 3 minutes whilst not connected to a device, they will automatically
power o to conserve power
We hope you’ve now got all the information you need to get started, but if you’re having problems with anything,
please feel free to contact us on: suppor[email protected].uk
Please do not attempt to open this product. There are no user serviceable parts inside, in particular if your product
has an embedded, non-replaceable battery, do not attempt to access or remove the battery as this may cause
personal injury and will damage the product.
Making any attempt to open the product or carry out repair voids any and all warranties