KJB SC1074 User guide

Motion Activated
Hidden Video Recording
System Manual
P/N: F40072B01
Patent No. M356942
SleuthGear Recluse

- 1 -
Package Contains ........................................................... 2
Quick Setup ................................ ................................ ..... 3
How to open Motion Activated Black Box ......................... 3
Interface .......................................................................... 4
LED Indicator status ........................................................ 4
Installation ....................................................................... 5
1. How to open battery cover..................................... 5
3. Coverage angle of the camera and PIR sensor ..... 6
4. How to charge the battery ..................................... 6
5. IR Remote control sensing area ............................ 6
Compatible Storage ................................ ......................... 7
Start to record................................ ................................ .. 7
Playback Function ........................................................... 8
Remote Control Diagram ................................................. 9
Screen Icons ................................ ................................ . 10
OSD Menu Structure Tree ............................................. 12
Software ........................................................................ 20
Software Operation Procedure....................................... 22
FAQ............................................................................... 26
Specifications ................................ ................................ 27
Contents
2How to insert and remove the batterty.................. 5

- 2 -
Package Contains
Motion Activated Black Box
IR remote control
Power adapter (12VDC)
AV Output cable
User manual
3.7V 4800mA Li-polymer
battery
Software CD
Charger cradle for Li-polymer
battery (optional)
Micro SD card
(optional)

- 3 -
Quick Setup
Step 1: Open the back cover
Step 2: Fully charge the battery for 10 hours for the first time
using (please backup or format Micro SD card
regularly to keep it efficient)
Step 3: Insert Micro SD card into Micro SD slot. Class 6 or
above level would be highly recommended.
Step 4: Switch the power to “ON” (power switch) to turn on
Motion Activated Black Box. The LED will be on. To
turn off Motion Activated Black Box, switch the power
to other side, when the final recording ended, all LEDs
will be off.
*Set the DATE/TIME to current date an d time before
recording; or the recording date and time will be incorrect.
*Use bundled accessories. Damage which is caused by other
device will be beyond warranty
How to open Motion Activated Black Box
In
Interface

- 4 -
Interface
LED Indicator status
Red
LED
On
Power on
x
Off
Power off
Green
LED
On
System ready,
Micro SD card
normal, and has
schedule
Blinking
System and Micro
SD card normal,
but doesn’t have
schedule
Off
System not
ready or Micro
SD card
abnormal
Yellow
LED
On
Battery charging
Blinking
Running out of
battery, please
charge it
Off
Battery not
charging

- 5 -
Installation
1. How to open battery cover
2. How to insert/ draw out Micro SD card
* Always power off the unit before removing the Micro SD card,
otherwise, the card may be damaged.
* Never remove Micro SD card from your computer with out using the
“Safely Remove Hardware” icon in your computer system tray .
Turn the device upside down.
Firstly open back cover and
then slide off the battery cover
according to the direction of
arrow (from two points to three
points)
After removing the battery
cover, take out the battery for
charging or changing the
battery. Please make sure of
the right direction when slide
battery back into place.
device. Insert micro SD card in the
slot. Never force the card into slot
& make sure the direction is
correct. Press micro SD card for
drawing out.
F

- 6 -
3. Coverage angle of the camera and PIR sensor
**The best IR performance distance will be 3 meters.
4. How to charge the battery
Connect bundled power adapter to power DC jack. The yellow
LED will be on if the battery is charging. Please fully charge for
7~8 hours.(Please charge for 10 hours when you charge the battery
for the first time.) With the optional cradle, the charging time is
around 3 hours and the green LED will be on.The battery, after
fully charged, can last for 6.5 hours at least under continuous
recording. Under motion activation or power saving when out of
schedule, Motion Activated Black Box can last for longer.
* NOTE: Under low temperature conditions, the battery will have
a shorter life than normal
* NOTE: Please use the bundled power adapter only. Damage
which is caused by other power adapter will be beyond
warranty.
* NOTE: Please charge the battery immediately after you receive
the unit
* NOTE: For better commanding the unit, u sers are highly
recommended to charge the battery once every 3
months to activate Li-polymer battery.
5. IR Remote control sensing area
Please point the IR remote
control at the marked area

- 7 -
Compatible Storage
The below micro SD cards are tested with CH0705.
* Apacer class 6 4GB micro card
* Toshiba 4G MicroSD
* Sandisk 2GB micro card
* Team 2G MicroSD / 4G MicroSD
* Transcend class 6 16GB micro card
* Transcend 1G MicroSD
* Kingston 4G MicroSD
* For those micro SD cards aren’t be tested which doesn’t
mean they are not compatible. We would highly recommend
to use the micro SD card for Class 6 or above. Class 6 or
above will have smoother footage.
Start to record
Once power on unit, recording is factory preset at Sensor (PIR)
recording mode. It can also be reset as continuous recording
through MENU. Sensor (PIR) mode is when there’s motion, the
Black Box will automatically boot up for recording within 2
seconds. Once the motion ended, it will remain recording for 5
seconds (10/15/20 seconds are selectable on OSD menu) then
turn off the DVR automatically after 15 seconds (30/60 seconds
are selectable on OSD menu) in order to save power.
* Please press “menu” key before taking away the Micro SD card;
otherwise, the recording will not be saved onto Micro SD card.

- 8 -
Playback Function
Press key on remote control to get in to playback menu.
You can use “Time search” to enter the date/time which you
would like to view. Or get into “Event Search” to see the event
list and press button to playback from a selected recording.
PLAYBACK Instruction
1. ID CAM_01: the ID of
recording
2. >: Playback
3. <: Rewind playback
4. PB: Playback mode
5. 1X: Speed of playback, 1X/
2X/ 4X/ 8X
6. PAUSE: Pause palyback
7. 2010/10/01: Date of recording
8. 10:10:25: Time of recording
1 ID
>PB 1X PAUSE 2010/10/01
10:10:25

- 9 -
Remote Control Diagram
Numeric Key
Button
Function
Description
Universal password:
UP/UP/DOWN/DOWN/+/+/ -/-
Panic
Record
Start to Record manually. Press again
to cancel recording mode
KEYPAD
Virtual keypad input
Lock
Key lock
MENU/Exit
Menu mode or Exit to last page
UP (7)
DOWN (0)
LEFT (8)
RIGHT (9)
Confirm the setting/change
Still image (snapshot)
Enter
Confirm
Plus
Minus
Adjust Value
1
2
3
4
5
6
7
7
8
9
0