KJB SleuthGear Series User manual

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on twitter @sleuthgear
1
Wi-Fi DVR Manual
Table of Contents
Warnings & Precautions
2
Includes
3
Introduction
3
Quick Setup Guide
4
Features
4
Setup
5
EZ-SEE Menu & Settings
12
Playback
21
Frequently Asked Questions
22
Specifications
24
Pictures
25
Warranty & Disclaimers
26

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on twitter @sleuthgear
2
EU Environmental Protection
The symbol of crossed-out garbage shows that this product should not be treated as
household waste, as it falls into the category of electric/electronic equipment for
recycling. This electronic device should not be disposed of in regular trash. We strongly
advise you to contact your local authority for proper disposal of this product.
Do not bring the device suddenly from a hot to a cold place, or vice versa. This may
cause damage to the inside of the unit by creating condensation.
Protect from high temperatures. To avoid damage or mis-operation of the device,
only use in temperature of 0 ~ +40°C(32 ~ 104°F).
Protect from humidity. Do not put it in water and be careful to protect it from rain, sea
water, or high humidity environment. Do not operate the unit near a bath tub, shower,
sink, swimming pool, etc.
Do not open/modify the device, as it may cause damage to the unit and void the
Warranty. For internal repairs, consult your dealer or an Authorized Service Center.
Do not use any accessories or power supplies other than what comes with the device,
otherwise it could void the warranty.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on twitter @sleuthgear
3
Includes
Zone Shield®Wi-Fi device by SleuthGear®
CD with full User Manual
Compatible Memory Storage
For the device to function properly, below memory card brands of class 6 and above are
recommended:
Apacer
Toshiba
Sandisk
Kingston
For 64GB cards, the below memory card brands of class XCI or above are recommended:
Toshiba
Samsung EVO
Recording Duration Chart
Introduction
Zone Shield®Wi-Fi cameras allow easy remote viewing anywhere on the free EZ-SEE app. Event
notifications alert you when the hidden camera detects activity in your home or office. Connect
multiple cameras and view live streaming video from all devices on your tablet or smart phone.
Record and playback video using a micro memory card.
All of our SleuthGear®line of hidden cameras are designed and assembled in Nashville, TN USA
backed by our 1 year warranty. Visit our website to see the full line of SleuthGear®hidden cameras
at www.mysleuthgear.com
Size
Frame rate
1GB
8GB
16GB
32GB
64GB
HD
15 fps
1.35 hours
10.8 hours
21.6 hours
43.2 hours
86.4 hours
D1
15 fps
1.96 hours
15.68 hours
31.36 hours
62.72 hours
125.44 hours

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on twitter @sleuthgear
4
Quick Setup Guide
1. Open the Zone Shield®camera to insert the memory card into the memory card slot and
connect the power supply.
2. Download the “EZ-SEE” App from Apple Store or Google Play. Open the app after it has
installed.
3. In the app, go to “Add” in the top-left corner, then push the “SCAN” button in the middle of the
next screen. Locate the QR code on your camera and point your smart device at the QR
code so your smart device can scan the code. The app will now directly connect your smart
phone or tablet to your device through Wi-Fi.
4. Once connected, there will be a pop-up confirming to connect to the internet for remote live
view. Select your Wi-Fi network and type in your password. The camera will reboot and take
1-2 minutes to come back online.
5. Once the camera reboots, it is now ready for live viewing from your smart phone or tablet.
Features
Free Live viewing anytime from anywhere
Use on multiple smart devices
Place cameras in different locations and see in one App/Device
HD recording
Quick set up
Event notification so you always know what is taking place in your home or office
Store up to 125 hours of video on a micro memory card
Protect your home, office, vacation home, watch your pets, nanny or use as a baby monitor

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on twitter @sleuthgear
5
Setup
EZ-SEE App Installation
Search for “EZ-SEE” in AppleApp Store or Google Play Store and install it on your smart phone
or tablet.
Android iOS
Adding Your Device
QR Code
1. Turn on the device and wait 1 minute for the Wi-Fi module to boot.
2. Locate your device’s ID number on the QR code sticker (eg. 20000001).
3. Open the EZ-SEE App and press “Add” button in the top left corner.
Android iOS

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on twitter @sleuthgear
6
4. Press “Scan” button to scan the QR code.
Android iOS
5. Point your smart device’s camera at the QR code and the app will scan the code.
6. After scanning, the EZ-SEE App will link to the camera automatically.
Peer-to-Peer
1. Turn on the device and wait 1 minute for the Wi-Fi module to boot.
2. Locate your device’s ID number on the QR code sticker (eg. 20000005).
You will see EZ-SEE followed by the ID number (in your smart device’s Wi-Fi list).
3. Select this network to directly connect your smart phone or tablet to your camera.
The default password is: 888888888
Android iOS

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on twitter @sleuthgear
7
4. Open the EZ-SEE App and press “Add” button in the top left corner.
Android iOS
5. Type in the ID Number from the QR sticker. The default Username/ Password is: root/admin
Android iOS

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on twitter @sleuthgear
8
6. You will see the device ID in the camera list. Click on the ID of the device you would like to
live view. You will see Network Status in the top right corner of the screen
Android iOS
Connecting Device to Your Wi-Fi
Once the Peer-to-Peer connection is made, a pop up message will ask if you would like to
connect to the internet for remote live-view.
Press OK and then Internet mode setup will begin. If you select “Later”, you can set up Internet
mode at a later time.
Android iOS
Setup Internet Mode Now
1. The below dialog box will come up for linking up with your internet router. When selecting a
Router SSID, all available wireless router networks are listed. Select the appropriate network.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on twitter @sleuthgear
9
Android iOS
2. Enter the password (if one is required), then push “Setup” button.
a. For Android version, a popup message will come up. EZ-SEE App will put the
device in Internet mode on the Wi-Fi network chosen and will reboot.
b. For iOS version, a camera list will pop up after inputting the router info. Select the
camera you would like to connect to. EZ-See App will start Internet mode for the
device on the network chosen. Press OK to confirm.
Android iOS
3. Allow the device to reboot. Once complete, live view is available. You will see Network
status is now in the top right corner of the live view screen.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on twitter @sleuthgear
10
Setup Internet Mode Later
1. Access the Wi-Fi setup from the camera list. Click “Menu” in the top right corner and then
select “Configure Wi-Fi.”
Android iOS
2. Select the appropriate network and enter the password (if one is required).
Android iOS

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on twitter @sleuthgear
11
Device ID
Exit to
Camera List
Connection
Mode
Dial Call
Camera
Status
Camera Status
Screenshot
Audio
3. Once completed, a pop up window will come up. Press OK to continue completed, a
pop up window will come up and press OK.
Android iOS
4. Allow the device to reboot. Once complete, live view is available. You will see
Network Status is now. in the top right corner of the live view screen.
Remote and Live View Screen Overview
Rotate

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on twitter @sleuthgear
12
Camera Status–Toggle the listed below info about the Live view camera on screen:
FPS and Bit Rate –The streaming camera technical info
Remain Time –Time left for recording on your memory card
Power Indicator –A/C power status
Camera ID –Shows the ID for the camera you are Live viewing
Exit to Camera List –Leaves Live view and returns to the camera list
Connection Mode –Internet or Peer-to-Peer modes.
Audio –Press it to mute audio (Law Enforcement or Export units only)
Snapshot –Press for an instant motion capture snapshot
Dial Call –Press to make a call to a set urgent dial call number. You will need to press again
to confirm and to start the call.
Rotate –Press to rotate the Live view screen 180°
Zoom –When Live viewing, gently put your index finger and thumb on the screen, sliding in
outward and inward directions on a specific area to zoom in and out.
EZ-SEE Menu and Settings
When the EZ-SEE App opens, you will see 2 buttons at the top.
Left Side: Add –camera adding as per previous instruction
Right Side: Menu –You will see below function button.
Android iOS

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on twitter @sleuthgear
13
Delete
1. Select the camera ID you would like to delete (eg.20000011).
2. Press "Done" to confirm
Android iOS
Configure EZ-SEE
Dial Call –Set up phone number as urgent contact.
Snapshot Pictures –The number of pictures are taken when you press the snapshot
button. Maximum setting is 5 pictures.
Android iOS

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on twitter @sleuthgear
14
Configure Camera
Note: If no devices have been added, you will not see this page
Select the camera you would like to set up
Android iOS
Camera Parameters
Adjustable Value
Framerate
1, 2, 3, 4, 5, 10, 15 FPS
Resolution
HD, D1
Motion Post Recording
5, 10, 15, 20, 60 sec
Storage Mode
Overwrite, Fullstop
LED Indicator
ON, OFF
Recording Audio
ON, OFF (Law Enforcement/ Export Only)
OFF will mute the audio recording
Buzzer
ON, OFF
OFF will mute the setting’s confirmation sound.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on twitter @sleuthgear
15
Date and Time
1. Press the Setup button to change the date and time.
2. You can manually key in the date time column and also can adjust value by pressing
“+” and “–“.
3. To save changes, press Confirm.
Android iOS
Schedule
1. Press the “Setup” button to enter the schedule screen. The schedule is set up in a grid,
with days of the week and time of day all separated out into separate squares.
2. There are 3 symbols on each square: Motion (M), Continuous (C), and None (-) By
default, all of them are set to Motion by default.
3. You can change these by
Pressing on day and time squares.
Pressing the day of the week will change all times of the day on that specific day.
Pressing the time of day will change that time for all days of the week.
Pressing “All” will change all of the squares at once.
Press these multiple times to cycle through the modes.
4. Press “Confirm” to save the schedule you have created.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on twitter @sleuthgear
16
Android iOS
Format Storage
1. Press confirm to format the memory card.
2. Below dialog will show to re-confirm that you want to format the memory card. Press
“Format” to re-confirm.
Android iOS

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on twitter @sleuthgear
17
Reset to Default
1. Press “Confirm” to reset all settings to factory default.
2. Below dialog will show to re-confirm that you want reset all settings to factory
default.
3. Press “Reset” to re-confirm.
Android iOS
User Name, Password and Camera Name
1. Change any singe field or any combination of the three
2. To save your changes, press “confirm”
Android iOS
3. You will see the Firmware Version of the device on the bottom of the page.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on twitter @sleuthgear
18
Wi-Fi Setup
Please refer to page 8.
Alert Setup and Notifications
When a movement is detected by the camera, an alert can be instantly sent to your smart
phone or tablet. Note: The camera will only send alerts when a memory card is inserted
and the schedule is set to motion
1. Select the camera you would like to have send alerts.
Android iOS
2. To enable alerts, tap the toggle to the right of “Enable Alert,” then press “Confirm”
Android iOS

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on twitter @sleuthgear
19
3. When an alert is received from a camera, a notification will appear on your smart
phone or tablet.
Android iOS
4. If the EZ-SEE App is open to the camera list when an alert is received, the camera ID
will also flash Green in the camera list.
Android iOS
5. To disable alerts, repeat steps 1& 2 for any cameras that have alerts enabled.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on twitter @sleuthgear
20
Alert Record
Alert Record is a list of your camera alert history
Android iOS
About
This shows the version number of the EZ-SEEApp installed on your smart phone or
tablet
Android iOS