KMART 42767503 User manual

42767503 METAL TRAY TABLE
Assembly Instructions
Please read instructions carefully. Remove all parts from the carton. Be sure you have all parts before you start assembling.
Place all parts on a clean and flat soft surface, such as carpet or a rug to prevent from being scratched.
Assembly by an Adult required
2 pcs
1 pc
Step 1 : Fasten leg tubes (Part A & B) by screws (Part D, E). Do not tighten
all screws until assembly is complete.
D
E
A
AB
B
D
E
Step 2 : Ensure all the screws have been tightened, put the
is completed.
table tray (Part C) on the leg frame (step 1), the assembly
C
G
Please note: If the table is
unstable after assembly,
adjust by adding Part G
under the legs.
1 pc
1 pc
1 pc
2 pcs
A
B
C
D
E
F
G2 pcs

CARE INSTRUCTIONS:
WIPE CLEAN WITH A DAMP CLOTH.
DO NOT USE ABRASIVE MATERIALS AND SOLVENTS.
STORE IN A DRY PLACE
WARNING :
1) DO NOT STAND OR SIT ON THE TABLE.
2) ENSURE TABLE IS USED ON EVEN, FLAT GROUND.
3) DO NOT USE THE TABLE UNLESS ALL BOLTS , SCREWS AND KNOBS ARE FIRMLY
SECURED.
4) DO NOT USE THE TABLE AS A STEP LADDER.
5) FOR DOMESTIC USE ONLY.
MAXIMUM LOADING WEIGHT: 15KG
FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY.